CRU DataPort 2 Bay, DataPort 4 Bay Install Manual
Rugged, Reliable, Mobile, Secure
DataPort 2 Bay or 4 Bay SATA or SAS Enclosures
with Removable Drive Carriers
This install guide is intended to support DataPort 2 Bay or 4 Bay
Multi-lane Enclosures in the following configurations:
0043-7120-5240 4 Bay SAS/SATA Enclosure w/ DataPort 10s
0023-7120-5220 2 Bay SAS/SATA Enclosure w/ DataPort 10s
0043-7180-5240 4 Bay SAS/SATA Enclosure w/ Data Express DX115s
0023-7180-5220 2 Bay SAS/SATA Enclosure w/ Data Express DX115s
0043-5960-5240 4 Bay SATA Enclosure w/ Data Express DE110s
Package Contents
DataPort 2 Bay Enclosure
1 - DataPort 2 Bay Enclosure
2 - Carrier & Frame Assemblies
2 - Key Sets
2 - Screw Kits
1 - Power Cable
The DataPort Enclosures with removable drive carriers support up to
four (4) SATA or SAS hard drives. The DataPort Enclosures require a
multi-lane cable with an SFF-8470 InfiniBand connector.
DataPort 4 Bay Enclosure
1 - DataPort 4 Bay Enclosure
4 - Carrier & Frame Assemblies
4 - Key Sets
4 - Screw Kits
1 - Power Cable
Hard Drive Installation
1. Remove the drive cover from the carrier.
2. Carefully insert the drive into the carrier. Slide the drive towards the
Drive Carrier Board, so that the I/O connector on the drive mates with
the connector on the Drive Carrier Board. Hold the drive in place and
turn the drive/carrier assembly over.
3. Fasten the drive into place with four (4) provided screws. Some drives
may require minor adjustment before securing into carrier with screws.
4. Install the drive cover and secure with two (2) provided screws.
SAS or SATA
Drive
(not included)
TM
NOTE: The DataPort Enclosure does not include the required
external enclosure to host cable.
The DataPort Enclosure supports two different multi-lane cables, the
SFF-8470 (InfiniBand) to SFF-8470 (InfiniBand) cable (CRU PN 7366-700-
03) or the SFF-8470 (InfiniBand) to SFF-8088 (Mini-SAS) cable (CRU PN
7366-701-01). Consult your host bus adapter manual to determine which
interface it supports.
For internal host support CRU offers a cable assembly kit. The 4x SATA
to SFF-8470 (InfiniBand) PCI host adapter with four (4) SATA data cables
and SFF-8470 (InfiniBand) to SFF-8470 (InfiniBand) external cable (CRU
part number 7100-800-10) will provide the end to end cabling required
to set up the DataPort Enclosure.
These cables are available through CRU’s authorized resellers or direct
from CRU at www.CRU-DataPortStore.com.
Drive Board
Carrier
Drive Carrier
Hard Drive
Mounting
Screws (4 each)
Figure 1: Installing Hard Drive (DE110 carrier shown)
1-800-260-9800 www.CRU-DataPort.com
Rugged, Reliable, Mobile, Secure
TM
Enclosure Setup Instructions
1. Power off the host computer.
2. Connect the host computer to the DataPort Enclosure with an external multi-lane cable (not provided).
NOTE: CRU 2 Bay Enclosures only use two (2) of the four (4)
multilane host bus adapter connections.
3. Install hard drives in the removable carriers. See hard drive installation instructions for more details.
4. Insert the removable carriers into the enclosure and engage the lock
on the receive frames.
NOTE: The lock on both the DE110 and DP10 receiving frames
functions as both a lock and a DC power switch for the carrier
unit. The lock MUST be engaged in order to supply power to the
carrier and installed drive unit.
5. Power on the DataPort Enclosure with the power button located on
the lower right corner on the front of the enclosure. For best results
power on the enclosure prior to powering on the host system.
NOTE: The DataPort Enclosure supports hot swapping provided
the host bus adapter also supports that feature. When hot swapping drives, ensure drive activity has stopped before powering
down the removable carrier.
Enclosure
Cooling Fan
SFF-8470
Connector
Power Supply
Cooling Fan
Figure 2: Enclosure Rear View
A/C Power Plug
Power Supply
Power Switch
Enclosures with LED Functions
Drive ID LED
Drive Activity LED
Power Switch Lock
Enclosure Power LED
Enclosure Power Switch
Enclosure with DE110s
Power LED
Activity LED
Power Switch Lock
Enclosure Power LED
Enclosure Power Switch
Enclosure with DP10s
Power LED
Activity LED
Power Button
Key Lock
Enclosure Power LED
Enclosure Power Switch
Enclosure with DX115s
Product Warranty
CRU-DataPort (CRU) warrants the DataPort 2 Bay or 4 Bay SATA or SAS Enclosures with Removable Drive Carriers to be free of significant defects in material and workmanship for a period of one year from the original
date of purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other
warranties, including but not limited to, the implied warranties of merchantability and fitness for a particular
purpose and non-infringement of third-party rights with respect to the documentation and hardware. No CRU
dealer, agent or employee is authorized to make any modification, extension, or addition to this warranty. In
no event will CRU or its suppliers be liable for any costs of procurement of substitute products or services,
lost profits, loss of information or data, computer malfunction, or any other special, indirect, consequential, or
incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service,
even if CRU has been advised of the possibility of such damages. In no case shall CRU’s liability exceed the
actual money paid for the products at issue. CRU reserves the right to make modifications and additions to
this product without notice or taking on additional liability.
FCC Certification
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received; including interference that may cause undesired operation.
IT Power Systems
This enclosure is intended for use on a TN power system. This enclosure was evaluated for use on an IT
power system in accordance with Norway National Differences to IEC60950-1.
Register your product at www.CRU-DataPort.com.
A5-024-0007 Rev. 3.0
1-800-260-9800 www.CRU-DataPort.com
Loading...