Crown Audio SST-SBSC 3632T User Manual

SST-SBSC
3632T

he Crown SST-SBSC 3632T is a custom
three-channel crossover network with CD­horn equalization and summed low-

T

frequency output specifi cally designed for use
with JBL model 3632T ScreenArray
speaker systems installed in cinemas, studio
production and post-production environments.

SST (System Solution Topologies) modules
install into the back of Crown SST-compatible
amplifi ers, saving rack space and simplifying
system wiring.

For more details about the Crown SST-SBSC
3632T, contact Crown Technical Support
at 800-342-6939 or 574-294-8200. Also,
visit the Crown Audio website at
www.crownaudio.com.

Specifi cations

Performance

Frequency Response: See graph.
Signal to Noise (A-Weighted): Better than 85

dB below rated power.
Input Impedance: 20 k ohms balanced, 10 k

ohms unbalanced.

Output Impedance: 600 ohms balanced.
Total Harmonic Distortion (THD): 1 kHz rated

power, less than 0.1% THD.

Crosstalk: > 50 dB from 20 Hz to 20 kHz.
Maximum Output: +18 dB into 600 ohms.

Connectors

Input: Neutrik® Combo jacks.
Output: Removable balanced terminal block.

®

cinema

SYSTEM SOLUTION TOPOLOGIES

Features

• High-quality crossover and CD-horn EQ
module designed specifi cally for use with JBL
model 3632T ScreenArray
systems

• High-frequency (HF) signals are internally
routed to the Channel 2 amplifi er input, and
mid-frequency (MF) signals are routed to the
Channel 1 amplifi er input

• Low-frequency (LF) signals are routed from
Output B to an external amplifi er

®

cinema speaker

DETAIL SHOWING NO CENTER GROUND CONNECTION

• SST modules install into the back of your ampli­fi er, saving rack space and simplifying system
wiring

®

• Neutrik

• Removable terminal block jacks for balanced

• SST Modules add fl exibility by allowing you to

Combo jacks for balanced input con-

nection

output to other components

tailor your Crown Contractor (CH/CL) Series or
CE Series amplifi er to your application

System Block Diagram

Frequency Response

Crown’s Three-Year, No-Fault, Fully Transferable Warranty

Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown amplifi er
product—an unsurpassed industry standard. With this unprecedented No-Fault protection, your
new Crown amplifi er product is warranted to meet or exceed original specifi cations for the fi rst
three years of ownership. During this time, if your unit fails, or does not perform to original
specifi cations, it will be repaired or replaced at our expense. About the only things not covered
by this warranty are those losses normally covered by insurance and those caused by intentional
abuse. And the coverage is transferable, should you sell your unit.

See your authorized Crown dealer for full warranty disclosure and details. For customers outside
of the USA, please contact your authorized Crown distributor for warranty information or call
574-294-8200.

Crown International
1718 W. Mishawaka Rd.
Elkhart, IN 46517-9439
TEL: [phone]
FAX: [phone]FAX
www.crownaudio.com

Specifi cations subject to change without prior notice. Latest
information available at www.crownaudio.com.

Crown and Crown Audio are registered trademarks of Crown
International. Other trademarks are the property of their respective
owners. Printed in U.S.A.

© 2005 Crown Audio

7/05 132289-5B

®

, Inc.