Crosley CR17 i-Juke Instruction Manual

11-8-06
11-8-06
i - Juke
CR17
910-256700-001
MUTE
VOL+
extras
VOL-
Instruction Manual
WARRANTY
Crosley Radio Products are warranted against defects in material and workmanship for a period of 90 days beginning from the date of sale to the original purchaser.
Should the unit fail under normal usage during the 90 day warranty period, a request for RETURN AUTHORIZATION (R.A.) must be made by the original customer before returning the unit. Call Crosley Radio customer service for Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to Friday.
Upon receiving the RETURN AUTHORIZATION number from the Customer Service Department, properly pack your unit in its original packaging. Include any adapters, parts, & accessories which were originally provided with the product, along with a check or money order for $19.95 made out to Crosley Radio to cover the handling and return postage. Display the R.A. # on the outside of the carton and ship PREPAID via standard UPS or its equivalent.
ATTN: RETURNS DEP'T
2001 PRODUCTION DRIVE
BAY 2 & 3
LOUISVILLE, KY 40299
CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.
The purchasers bill of sale is the only proof of warranty entitlement and must accompany the unit.
The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial use or modification of, or to any part of the product. This warranty does not cover damage due to improper operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.
This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state to state.
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty" which in no way compromises Crosley Radio high standards of Quality and Workmanship.
External Outputs Auxiliary Inputs
9
Specification
Power Source :
Input AC110-240V 50-60Hz
Output DC14V 2.5A Power Consumption : 30W Speaker :
Dynamic type 4 4 Ohm x 2
* DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Connecting Optional Equipment
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The iJuke (CR17) is equipped with external speaker outputs which will allow you to hook up external speakers.
1 The speaker jacks for external speakers are 4
ohm jacks and are located on the back of the unit. Beside the speaker jacks is the external / internal speaker switch which is labeled (EXT. / INT.) When using external speakers, this switch must be switched to the EXT. position. Doing this turns off the internal speakers in the unit and redirects to power to the external speakers.
2 If you decide not to use the external speakers,
be sure the switch is on INT. position or the internal speakers will not work.
You can connect external audio devices such as CD Players or other MP3 players by using the Auxiliary Input (Aux In) jack and the supplied Auxiliary cable. To connect an external devise, follow the directions below.
1 Connect one end of the supplied Auxiliary Cable
to the Aux In jack on the back of your unit.
2 Connect the other end of the cable to the Audio
Out Jack or Headphone Jack of your external component.
Note: If your external component doesnt have a 3.5mm
output jack or headphone jack, you will need a different cable to make the connection. Check your local electronics retailer for different cable options.
3 Begin play on the external component and adjust
the volume of the iJuke to your desired listening level.
4 See the owners manual for your external
component for information on its operations.
Auxiliary cable
The exclamation point within an equilateral triangle is intended to alert user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Loading...
+ 4 hidden pages