Signal Types: Auto-detecting composite, S-Video, or component
Formats: NTSC 480i or PAL 576i
Color Depth: 24-bit, 16.7M colors
Features: Single-window scalable to full-screen, input switching
between QM and VIDEO inputs, time base correction, gamma
correction, line doubling, motion adaptive deinterlacing, reverse
3:2/2:2 pulldown
Audio
Hardware Features: Built-in microphone and amplified speakers,
stereo headphone output, internal volume control and audio mixer
QM IN: (1) 8-wire RJ45 female, QuickMedia input port
Signal Types: Auto-detecting component (YP
S-Video (Y/C), or composite video with stereo program audio and
(2) mic channels;
Video Formats: NTSC 480i or PAL 576i
Connects to QM output port of a QM-TX or other QuickMedia device
via CresCAT-QM or CresCAT-IM cable;
Maximum Cable Length: 300 ft (aggregate distance from
QM origination)
VIDEO IN: (1) 8-wire RJ45 female, CAT5 balanced video input port
Signal Types: Auto-detecting component (YP
or composite;
Formats: NTSC 480i or PAL 576i
Input Impedance: 100 ohms balanced
Connects to any Crestron CAT5 balanced video source via CresCAT
cable, or TPMC-CH-IMC interface module (included) via 15 foot
“triamese” cable provided;
Maximum Cable Length: 500 feet for component, 750 feet for
composite/S-Video
BPR
),
BPR
), S-Video (Y/C),
®
17" Widescreen Tilt Touchpanel (continued)
AUDIO I/O: (1) 8-wire RJ45 female
Bidirectional CAT5 balanced audio port
Signal Types: Receives (1) balanced stereo audio signal, and
transmits (1) balanced stereo audio signal from internal microphone;
Maximum Input Level: 4 V
Maximum Output Level: 2 V
Input/Output Impedance: 600 ohms
Connects to any other Crestron CAT5 balanced audio port via
CresCAT cable, or TPMC-CH-IMC interface module (included) via
15 foot “triamese” cable provided;
Maximum Cable Length: 1000 feet
HEADPHONES: (1) 3.5 mm TRS mini phone jack
Output Power: 12mW per channel
Minimum Impedance: 32 ohms
USB: (1) USB Type B female (reserved for future applications)
NET: (1) 4-pin 3.5mm detachable terminal block
Cresnet Slave Port, connects to Cresnet control network, or
TPMC-CH-IMC interface module (included) via 15 foot “triamese”
cable provided
LAN: (1) 8-wire RJ45 with 2 LED indicators
10BaseT/100BaseTX Ethernet port
Green LED indicates link status
Yellow LED indicates Ethernet activity
RS-232: (1) 6-pin RJ11 female
Computer console, touch output or mouse input port
Bidirectional RS-232 up to 115.2k baud
Hardware and software handshaking support
G: (1) 6-32 screw, chassis ground lug
MEMORY EXPANSION: (1) Type II Compact Flash card slot for
Temperature: 41° to 113°F (5° to 45°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Construction: High impact injection-molded case, tilt screen with
adjustable tension, integral rear cover and cable strain relief in base
Screen Tilt: Adjustable 45 to 90 degrees
Dimensions
Height: 13.78 in (35.01 cm)
Width: 17.63 in (44.79 cm)
Depth: 12.40 in (31.50 cm)
Signal Types: Auto-detecting composite, S-Video, or component
Formats: NTSC 480i or PAL 576i
Color Depth: 24-bit, 16.7M colors
Features: Single-window scalable to full-screen, input switching
between QM and VIDEO inputs, time base correction, gamma
correction, line doubling, motion adaptive deinterlacing, reverse
3:2/2:2 pulldown
Audio
Hardware Features: Built-in microphone and amplified speakers,
stereo headphone output, internal volume control and audio mixer
QM IN: (1) 8-wire RJ45 female, QuickMedia input port
Signal Types: Auto-detecting component (YP
composite video with stereo program audio and (2) mic channels;
Video Formats: NTSC 480i or PAL 576i
Connects to QM output port of a QM-TX or other QuickMedia device
via CresCAT-QM or CresCAT-IM cable;
Maximum Cable Length: 300 ft (aggregate distance from
QM origination)
VIDEO IN: (1) 8-wire RJ45 female, CAT5 balanced video input port
Signal Types: Auto-detecting component (YP
or composite;
Formats: NTSC 480i or PAL 576i
Input Impedance: 100 ohms balanced
Connects to any Crestron CAT5 balanced video source via CresCAT
cable, or TPMC-CH-IMC interface module (included) via 15 foot
“triamese” cable provided;
Maximum Cable Length: 500 feet for component, 750 feet for
composite/S-Video
AUDIO I/O: (1) 8-wire RJ45 female
Bidirectional CAT5 balanced audio port
Signal Types: Receives (1) balanced stereo audio signal, and
transmits (1) balanced stereo audio signal from internal microphone;
Maximum Input Level: 4 V
Maximum Output Level: 2 V
Input/Output Impedance: 600 ohms
RMS
RMS
TPS-15B using QuickMedia
tilt touchpanels
BPR
), S-Video (Y/C), or
BPR
), S-Video (Y/C),
®
15" Tilt Touchpanel (continued)
Connects to any other Crestron CAT5 balanced audio port via
CresCAT cable, or TPMC-CH-IMC interface module (included) via
15 foot “triamese” cable provided;
Maximum Cable Length: 1000 feet
HEADPHONES: (1) 3.5 mm TRS mini phone jack
Output Power: 12mW per channel
Minimum Impedance: 32 ohms
USB: (1) USB Type B female (reserved for future applications)
NET: (1) 4-pin 3.5mm detachable terminal block
Cresnet Slave Port, connects to Cresnet control network, or
TPMC-CH-IMC interface module (included) via 15 foot “triamese”
cable provided
LAN: (1) 8-wire RJ45 with 2 LED indicators
10BaseT/100BaseTX Ethernet port
Green LED indicates link status
Yellow LED indicates Ethernet activity
RS-232: (1) 6-pin RJ11 female
Computer console, touch output or mouse input port
Bidirectional RS-232 up to 115.2k baud
Hardware and software handshaking support
Temperature: 41° to 113°F (5° to 45°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Construction: High impact injection-molded case, tilt screen with
adjustable tension, integral rear cover and cable strain relief in base
Screen Tilt: Adjustable 45 to 90 degrees
Dimensions
Height: 13.68 in (34.75 cm)
Width: 14.94 in (37.95 cm)
Depth: 12.40 in (31.50 cm)
Weight
14.55 lbs (6.60 kg)
10
INCLUDED ACCESSORIES
TPMC-CH-IMC
CAT5 Balanced AV Interface Module + 15 ft triamese cable
(See TPMC-CH-IMC specifications for complete information)
Signal Types: Auto-detecting composite, S-Video, or component
Formats: NTSC 480i or PAL 576i
Color Depth: 24-bit, 16.7M colors
Features: Single-window scalable to full-screen, input switching
between QM and VIDEO inputs, time base correction, gamma
correction, line doubling, motion adaptive deinterlacing, reverse
3:2/2:2 pulldown
Audio
Hardware Features: Built-in microphone and amplified speakers,
stereo headphone output, internal volume control and audio mixer
QM IN: (1) 8-wire RJ45 female, QuickMedia input port
Signal Types: Auto-detecting component (YP
composite video with stereo program audio and (2) mic channels;
Video Formats: NTSC 480i or PAL 576i
Connects to QM output port of a QM-TX or other QuickMedia device
via CresCAT-QM or CresCAT-IM cable;
Maximum Cable Length: 300 ft (aggregate distance from
QM origination)
VIDEO IN: (1) 8-wire RJ45 female
CAT5 balanced video input port
Signal Types: Auto-detecting component (YP
or composite;
Formats: NTSC 480i or PAL 576i
Input Impedance: 100 ohms balanced
Connects to any Crestron CAT5 balanced video source via CresCAT
cable, or TPMC-CH-IMC interface module (included) via 15 foot
“triamese” cable provided;
Maximum Cable Length: 500 feet for component, 750 feet for
composite/S-Video
TPS-12B using QuickMedia
tilt touchpanels
BPR
), S-Video (Y/C), or
BPR
), S-Video (Y/C),
®
12" Tilt Touchpanel (continued)
AUDIO I/O: (1) 8-wire RJ45 female
Bidirectional CAT5 balanced audio port
Signal Types: Receives (1) balanced stereo audio signal, and
transmits (1) balanced stereo audio signal from internal microphone;
Maximum Input Level: 4 V
Maximum Output Level: 2 V
Input/Output Impedance: 600 ohms
Connects to any other Crestron CAT5 balanced audio port via
CresCAT cable, or TPMC-CH-IMC interface module (included) via 15
foot “triamese” cable provided;
Maximum Cable Length: 1000 feet
HEADPHONES: (1) 3.5 mm TRS mini phone jack
Output Power: 12mW per channel
Minimum Impedance: 32 ohms
USB: (1) USB Type B female (reserved for future applications)
NET: (1) 4-pin 3.5mm detachable terminal block
Cresnet Slave Port, connects to Cresnet control network, or
TPMC-CH-IMC interface module (included) via 15 foot
“triamese” cable provided
LAN: (1) 8-wire RJ45 with 2 LED indicators
10BaseT/100BaseTX Ethernet port
Green LED indicates link status
Yellow LED indicates Ethernet activity
RS-232: (1) 6-pin RJ11 female
Computer console, touch output or mouse input port
Bidirectional RS-232 up to 115.2k baud
Hardware and software handshaking support
G: (1) 6-32 screw, chassis ground lug
MEMORY EXPANSION: (1) Type II Compact Flash card slot for
Temperature: 41° to 113°F (5° to 45°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Construction: High impact injection-molded case, tilt screen with
adjustable tension, integral rear cover and cable strain relief in base
Screen Tilt: Adjustable 45 to 90 degrees
Dimensions
Height: 12.15 in (30.86 cm)
Width: 12.85 in (32.64 cm)
Depth: 12.40 in (31.50 cm)
Weight
12.95 lbs (5.88 kg)
RMS
RMS
14
INCLUDED ACCESSORIES
TPMC-CH-IMC
CAT5 Balanced AV Interface Module + 15 ft triamese cable
(See TPMC-CH-IMC specifications for complete information)
Isys engine, 16-bit non-palette graphics; 65,536 colors; Synapse
image rendering algorithm; multi-mode objects, color key video
windowing
Video
Signal Types: Auto-detecting composite/S-Video
Formats: NTSC 480i or PAL 576i
Color Depth: 18-bit; 262,144 colors
Features: Single-window scalable to full-screen, time base
correction, gamma correction
Audio
Hardware Features: Built-in microphone with defeatable AGC,
built-in amplified stereo speakers, headphone output, internal
volume control and audio mixer
Audio Feedback (WAV): 8-bit PCM, mono, 8 kHz sampling rate
Amplification: 2 Watts per channel for built-in stereo speakers
Connectors
NET/VIDEO: (1) 10-pin RJ45 female, shielded
Connects to interface module via 15 foot “siamese” cable provided
Contains Cresnet data, 24 Volts DC power, ground, and video
signals
TPS-4000 in a CH CAT5 AV Distribution System
AUDIO: (1) 8-pin RJ45 female, shielded
Connects to interface module via 15 foot “siamese” cable provided
Contains stereo audio input and mic out signals
RS-232: (1) 6-pin RJ11 female
Serial connection to PC for loading screen files
Touchscreen output to PC or Telestrator
Bidirectional RS-232 up to 115.2k baud
Hardware and software handshaking support
HEADPHONES: (1) 3.5 mm TRS mini phone jack
Connects to stereo headphones (not included)
Output Power: 12mW
Minimum Impedance: 32 ohms
Power Requirements
22 Watts (0.92 Amp @ 24 Volts DC)
PW-2420RU power supply sold separately
Cresnet Power Usage: 22 Watts (0.92 Amp @ 24 Volts DC)
If power is applied to the 24VDC jack and the NET port
(on TPS-IMPC) simultaneously, power will be drawn from
whichever is highest.
Environmental
Temperature: 50° to 113°F (10° to 45°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Construction: High impact black/silver injection-molded case
Screen Tilt: Adjustable 30 to 80 degrees
Dimensions
Height: 10.03 in (25.48 cm)
Width: 10.96 in (27.83 cm)
Depth: 9.32 in (23.67 cm)