Crestron electronic SRD-ANT-1-PAK User Manual
Crestron SRD-ANT-1-PAK
Antenna System
Installation Guide
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
• Read and Retain Instructions – Read all Instructions before
• Outdoor Antenna Grounding – The antenna and coaxial cable
• Power Lines – An outside antenna system should not be located in
Important Safety Instructions
operating equipment and save for future reference.
connecting to the unit should be properly grounded to provide
protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code (NEC), ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
the vicinity of overhead power lines or electric light or power circuits,
or where they can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits, as contact with them
might be fatal.
All brand names, product names and trademarks are the property of their respective owners.
©2008 Crestron Electronics, Inc.
Crestron SRD-ANT-1-PAK Antenna System
Contents
Antenna System: SRD-ANT-1-PAK 1
Introduction................................................................................................................................1
Block Diagram.............................................................................................................1
Specifications...............................................................................................................2
Included Items .............................................................................................................2
Industry Compliance....................................................................................................3
Installation .................................................................................................................................4
Installation Notes.........................................................................................................4
Wall Mounting.............................................................................................................4
Pole Mounting .............................................................................................................5
Hookup ........................................................................................................................5
Aiming the Antenna.....................................................................................................5
Problem Solving.........................................................................................................................7
Troubleshooting...........................................................................................................7
Further Inquiries ..........................................................................................................7
Future Updates.............................................................................................................7
Appendix: Azimuth and Elevation Pointing Guide....................................................................8
Return and Warranty Policies ..................................................................................................11
Merchandise Returns / Repair Service.......................................................................11
CRESTRON Limited Warranty.................................................................................11
Installation Guide – DOC. 6721A Contents • i
Crestron SRD-ANT-1-PAK Antenna System
Antenna System:
SRD-ANT-1-PAK
Introduction
The SRD-ANT-1-PAK is a high quality outdoor antenna system designed for use
with a single Crestron
positioned up to 200 feet (cable length) from the tuner using standard RG-6 cable
(not included).
The antenna features a considerably narrower beam width compared to standard
consumer antennas, achieving superior gain and multi-path rejection. Additional
front end filtering provides excellent rejection to nearby out-of-band RF signals from
sources such as Wi-Fi, cellular telephones, and cordless telephones.
A wall mount bracket with elevation and azimuth adjustments is provided for
installation of the antenna to any horizontal or vertical flat surface. The additional
U-bolt and bracket enable mounting to a pole (not included) up to two inches in
diameter. Connections between the antenna and tuner are achieved using industry
standard RG-6 cable and F-type connectors (not supplied). One F-to-SMB adapter
cable is included to adapt the RG-6 cable with F-connector to the SMB input
connector on the tuner.
®
XM or SIRIUS® satellite radio tuner. The antenna may be
Block Diagram
Installation Guide – DOC. 6721A Antenna System: SRD-ANT-1-PAK • 1
Loading...