Crestron TPS-6L Start Guide

Crestron Touchpanels
Wallmount Touchpanel Mounting Options/Accessories
This guide covers mounting options and accessories for wallmount/surfacemount touchpanels.
NOTE: The illustrations in this guide are representative of a mounting option or accessory type. The main difference in
option/accessory types for each touchpanel series is size and, where applicable, the number of screws required.
Pre-Construction Options
Pre-construction options - Back Box Kit (BB) and Pre-Construction Mount Kit (PMK) - are installed prior to hanging drywall or other wall surface material, and require access to an adjacent structural support (stud). The Trim Mount Kit (TMK) and Mud Mount Kit (MMK) accessories are used to correct irregularities in the holes cut in the mounting surface.
NOTE: Make certain the template used to mark the opening in the mounting surface is level (if on a wall), or square to the front edge (if on a lectern). Cut the opening carefully, the mounting options provide for only minor position adjustment.
Back Box Kit
quickstart guide
Side mount Installations Front mount Installations
Use in installations where a back box is either required or preferred.
Trim Mount Kit (TMK)
(BB)
Pre-Construction Mount Kit
(PMK)
Crestron Touchpanels
Use in installations where a back box is not required or not preferred.
Mud Mount Kit (MMK)
1
Use with BB or PMK installations for smaller irregularities around the opening. This option provides a smooth, finished appearance and is preferred when wallpaper is hung.
For details, check the latest revision of the appropriate mounting kit Installation Guide for your touchpanel.
Use with BB or PMK installations to fill in larger irregularities around the opening. This option requires plastering.
800.237.2041
201.767.3400
www.crestron.com
©2007 Specifications subject to change without notice
Crestron Touchpanels
Wallmount Touchpanel Mounting Options/Accessories
Post-Construction Options
Post-construction options (WMKT, WMKM, WMKB) are for mounting to finished walls or other surfaces where access to a structural support member (stud) is not possible or does not apply (e.g., lectern mount).
Wall Mount Kit with Trim Ring
(WMKT)
quickstart guide
Used to fill in smaller irregularities around the opening. This option provides a smooth, finished appearance and is preferred when wallpaper is hung.
Wall Mount Kit - Bracket
Mou nting Brackets
(WMKB)
Wall Mount Kit with Mud Ring
Used to correct larger irregularities around the opening. This option requires plastering.
Mou nting
Clips
(WMKM)
Crestron Touchpanels
2
Mou nting
Screws
These kits are used to secure the touchpanel directly to the mounting surface without requiring an internal mounting plate . The specific mounting hardware used depends on the touchpanel. After installation, the mounting screws are hidden by the touchpanel bezel (not shown).
For details, check the latest revision of the appropriate mounting kit Installation Guide for your touchpanel.
Mou nting
Screws