Crestron RMK-IFE-1U User Manual

RMK-IFE-1U

IFE Rack Mount Kit

> Provides a secure rack mount solution for Crestron®

IFE based devices

> Accommodates up to three micro and/or small IFE

devices, or two IFE devices of any size

> Versatile positioning affords optimal front and rear

access with neat cable management

> Removable front cover panel provides a clean,

stealthy appearance

> Matches the appearance of other rack-mountable

Crestron products

> Rugged metal construction with black finish

> Occupies a single 19î EIA rack space

> Ships fully assembled

The RMK-IFE-1U is a 1-space rack mount shelf designed to provide a
19” rack-mounting solution for Crestron® products that utilize the IFE form
factor. The IFE form factor is an “Integrator Friendly Enclosure” design that
enables a variety of installation options. An IFE device comes in one of
three IFE sizes: micro, small, or medium. The RMK-IFE-1U accommodates
up to three micro and/or small IFE devices, or two medium IFE devices.
You can also combine one medium with one micro or small device. Each
device sits firmly on the shelf with its feet set into laser cut-outs, and
attaches securely using screws provided with the RMK-IFE-1U. The
complete assembly fits in a single 19 inch EIA rack space.

The RMK-IFE-1U includes many installer-friendly features. IFE devices
can be mounted to the shelf in a forward or set-back position. The forward
position enables clear visibility and access to the deviceís front panel,
while the set-back position provides improved rear panel access with
added frontal clearance for the wiring of devices with front panel
connections. Adequate space is provided around each installed device to
allow wiring to pass cleanly from front to back. Cable tie holes at the rear
of the shelf facilitate the management of wires and cables for a neat
looking installation.

The front cover panel of the RMK-IFE-1U can be easily removed at any
time to allow front access to installed devices. When installed, the front
cover panel completely hides the devices and wiring from view for a clean,
tamper-resistant install. The front cover panel may also be removed
permanently for installations requiring constant access to the devices’
front panels.

Dimensions

Height: 1.72 in (44 mm)
Width: 19.00 in (483 mm)
Depth: 9.94 in (253 mm)

Weight

3.5 lb (1.6 kg)

MODELS

Available Models

RMK-IFE-1U: IFE Rack Mount Kit

Notes:

This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Crestron disclaims any proprietary interest in the marks
and names of others. Crestron is not responsible for errors in typography or photography.
Specifications are subject to change without notice. ©2014 Crestron Electronics, Inc.

SPECIFICATIONS

Construction

Chassis: Metal, black finish
Front Panel: Removable, extruded metal, black finish, polycarbonate

label overlay
Mounting: 1U 19-inch rack-mountable

crestron.com | 800.237.2041

RMK-IFE-1U IFE Rack Mount Kit

Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647

Tel: [phone] | Fax: [phone]

www.crestron.com

All brand names, product names and trademarks are the property of their respective owners.

Specifications subject to change without notice. Revised 05/05/14

©2014 Crestron Electronics, Inc.