Crestron RMK-6000 User Manual

Rack Mount Kit: RMK-6000

L

The RMK-6000 is a complete rack mount kit that has been developed for the Crestron
TPS-6000LB and TPS-6000LW touchpanel models. Use the supplied hardware to assemble
the rack mount kit to the touchpanel.

Supplied Hardware

The RMK-6000 consists of two items with differing quantities. These items along with the
touchpanel produce an assembly that can be attached to a rack. Rack-mounting hardware is
not supplied.

ITEM PART NUMBER QUANTITY

Rack Mount Plate MTPL02588-1 1

Screw, Pan Phil #6-32 x 0.25" LG 8

Assembly View

Assembly of the RMK-6000 to the touchpanel is illustrated below. The RMK-6000 is designed
to occupy nine rack spaces, 15.72 inches (39.93 cm). The only difference between the two
sides of the rack plate is that a barcode appears on one side. The barcode side should be
hidden from view once installed in a rack. Attach the rack plate to the rack with rack-mounting
hardware. Use caution when handling the touchpanel as not to damage or scratch the view
screen. Place the touchpanel (without cover) in the rack plate opening and secure with the
supplied screws. Crestron recommends the use of a #2 Phillips head screwdriver to secure
the four supplied screws with a torque of 11 in-lbs (1.243 N*m). Align the cover guide pins
with the holes in the touchpanel and insert the cover over the touchpanel.

COVER

TOUCHPANE

SCREWS

RACK PLATE

Further Inquiries

If after reviewing this sheet for the RMK-6000, you cannot locate specific information or have
questions, please take advantage of Crestron's award winning technical support team by
calling:

• In the US and Canada, call Crestron’s corporate headquarters at
1-888-CRESTRON [1-888-273-7876].

• In Europe, call Crestron International at [phone].

• In Asia, call Crestron Asia at [phone].

• In Latin America, call Crestron Latin America at [phone].

• In Australia and New Zealand, call Crestron Pacific at [phone].

Crestron Electronics, Inc. Installation Guide – DOC. 5853A

15 Volvo Drive Rack Mount Kit: RMK-6000
Rockleigh, NJ 07647 05.03
Tel: 888.CRESTRON Specifications subject to change without notice.
Fax: [phone] www.crestron.com

Return and Warranty Policies

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange, or service without prior
authorization from CRESTRON. To obtain warranty service for CRESTRON
products, contact the factory and request an RMA (Return Merchandise
Authorization) number. Enclose a note specifying the nature of the problem, name
and phone number of contact person, RMA number, and return address.

2. Products may be returned for credit, exchange, or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped
freight prepaid to CRESTRON, Cresskill, N.J., or its authorized subsidiaries, with
RMA number clearly marked on the outside of all cartons. Shipments arriving freight
collect or without an RMA number shall be subject to refusal. CRESTRON reserves
the right in its sole and absolute discretion to charge a 15% restocking fee, plus
shipping costs, on any products returned with an RMA.

3. Return freight charges following repair of items under warranty shall be paid by
CRESTRON, shipping by standard ground carrier. In the event repairs are found to
be non-warranty, return freight costs shall be paid by the purchaser.

CRESTRON Limited Warranty

CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing
defects in materials and workmanship under normal use for a period of three (3) years
from the date of purchase from CRESTRON, with the following exceptions: disk drives
and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are
covered for a period of one (1) year; touchscreen display and overlay components are
covered for 90 days; batteries and incandescent lamps are not covered.

This warranty extends to products purchased directly from CRESTRON or an authorized
CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and
extent of the dealer's warranty, if any.

CRESTRON shall not be liable to honor the terms of this warranty if the product has
been used in any application other than that for which it was intended, or if it has been
subjected to misuse, accidental damage, modification, or improper installation
procedures. Furthermore, this warranty does not cover any product that has had the serial
number altered, defaced, or removed.

This warranty shall be the sole and exclusive remedy to the original purchaser. In no
event shall CRESTRON be liable for incidental or consequential damages of any kind
(property or economic damages inclusive) arising from the sale or use of this equipment.
CRESTRON is not liable for any claim made by a third party or made by the purchaser
for a third party.

CRESTRON shall, at its option, repair or replace any product found defective, without
charge for parts or labor. Repaired or replaced equipment and parts supplied under this
warranty shall be covered only by the unexpired portion of the warranty.

Except as expressly set forth in this warranty, CRESTRON makes no other warranties,
expressed or implied, nor authorizes any other party to offer any warranty, including any
implied warranties of merchantability or fitness for a particular purpose. Any implied
warranties that may be imposed by law are limited to the terms of this limited warranty.
This warranty statement supercedes all previous warranties.

Trademark Information

All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a
registered trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of
Microsoft Corporation.