Crestron RMK-1600 User Manual

Rack Mount Kit: RMK-1600

The RMK-1600 is a complete rack mount kit that has been developed for the Crestron
LC-1600L/W-DB & DW and CT-1600L/W-DB & DW touchpanel models. Use the supplied
hardware to assemble the rack mount kit to the touchpanel.

Supplied Hardware

The RMK-1600 consists of two items with differing quantities. These items along with the
touchpanel produce an assembly that can be attached to a rack. Rack-mounting hardware is
not supplied.

ITEM PART NUMBER QUANTITY

Rack Mount Plate 17501 1

Screw, Pan Phil #6-32 x 0.25" LG 4

Assembly View

Assembly of the RMK-1600 to the touchpanel is illustrated below. Crestron recommends the
use of a #2 Phillips head screwdriver to secure the four supplied screws with a torque of
11 in-lbs (1.243 N*m). The only difference between the two sides of the rack plate is that a
barcode appears on one side. The barcode side should be hidden from view once installed in
a rack. Use caution when handling the touchpanel as not to damage or scratch the view
screen. The RMK-1600 is designed to occupy four rack spaces, 7.0 inches (17.78 cm).

COVER

TOUCHPANEL

Further Inquiries

If after reviewing this sheet for the RMK-1600, you cannot locate specific information or have
questions, please take advantage of Crestron's award winning customer service team by
calling:

• In the US and Canada, call Crestron’s corporate headquarters at
1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400.

• In Europe, call Crestron International at [phone].

• In Asia, call Crestron Asia at [phone].

• In Latin America, call Crestron Latin America at [phone].

For local support from exclusive Crestron factory-trained personnel call:

• In Australia, call Soundcorp at [phone].

• In New Zealand, call Amber Technologies at [phone].

SCREWS

RACK PLATE

Crestron Electronics, Inc. Installation Guide – DOC. 5851A

15 Volvo Drive Rack Mount Kit: RMK-1600
Rockleigh, NJ 07647 12.00
Tel: 888.CRESTRON Specifications subject to change without notice.
Fax: [phone] www.crestron.com

Return and Warranty Policies

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange, or service without

prior authorization from CRESTRON. To obtain warranty service for
CRESTRON products, contact the factory and request an RMA (Return
Merchandise Authorization) number. Enclose a note specifying the nature
of the problem, name and phone number of contact person, RMA number,
and return address.

2. Products may be returned for credit, exchange, or service with a

CRESTRON Return Merchandise Authorization (RMA) number.
Authorized returns must be shipped freight prepaid to CRESTRON,
Cresskill, N.J., or its authorized subsidiaries, with RMA number clearly
marked on the outside of all cartons. Shipments arriving freight collect or
without an RMA number shall be subject to refusal. CRESTRON reserves
the right in its sole and absolute discretion to charge a 15% restocking fee,
plus shipping costs, on any products returned with an RMA.

3. Return freight charges following repair of items under warranty shall be

paid by CRESTRON, shipping by standard ground carrier. In the event
repairs are found to be non-warranty, return freight costs shall be paid by
the purchaser.

CRESTRON Limited Warranty

CRESTRON ELECTRONICS, Inc. warrants its Cresnet products, denoted by a
"CN" prefix model number, to be free from manufacturing defects in materials
and workmanship for a period of three (3) years from the date of shipment to
purchaser. Disk drives and any other moving or rotating mechanical parts are
covered for a period of one (1) year. CRESTRON warrants all its other products
for a period of one year from the defects mentioned above, excluding
touchscreen display components which are covered for 90 days. Incandescent
lamps are completely excluded from Crestron's Limited Warranty. CRESTRON
shall, at its option, repair or replace any product found defective without charge
for parts or labor. Repaired or replaced equipment and parts supplied under this
warranty shall be covered only by the unexpired portion of the warranty.

CRESTRON shall not be liable to honor warranty terms if the product has been
used in any application other than that for which it was intended, or if it has
been subjected to misuse, accidental damage, modification, or improper
installation procedures. Furthermore, this warranty does not cover any product
that has had the serial number altered, defaced, or removed.

This warranty shall be the sole and exclusive remedy to the purchaser. In no
event shall CRESTRON be liable for incidental or consequential damages of

any kind (property or economic damages inclusive) arising from the sale or use
of this equipment. CRESTRON makes no other warranties nor authorizes any
other party to offer any warranty, expressed or implied, including warranties of
merchantability for this product. This warranty statement supersedes all previous
warranties.

Trademark Information

All brand names, product names, and trademarks are the sole property of their respective owners.
Windows is a registered trademark of Microsoft Corporation. Windows95, Windows98 and
WindowsNT are trademarks of Microsoft Corporation.