Page 1
DO GUIDE
PYNG-CONNECT-COM
COM Port Expander for PYNG-HUB
DO Install PYNG-CONNECT-COM
The Crestron® PYNG-CONNECT-COM can be mounted on a DIN rail, mounted to any at
surface, or placed on a tabletop. If necessary, use screws that are applicable for the mounting
scenario. See illustrations and for installation options.
NOTE: The PYNG-CONNECT-COM can also be rack mounted. For rack mount installation,
refer to the RMK-IFE-1U Installation Guide (Doc. 7615) at www.crestron.com/manuals.
DIN Rail Mounting
DO Check the Box
QTY PRODUCT COLOR PART NUM.
1 Mounting Bracket White 4520167
1 5-Pin Connector 2003577
1 7 Foot Ethernet Cable 20 30114
2 Screw 2007225
Flat Surface Mounting
NOTE: Do not use the supplied screws to mount the bracket to the bottom of the
PYNG-CONNECT-COM if the device will be DIN rail mounted. Removing the
PYNG-CONNECT-COM from the DIN rail will not be possible.
Page 2
DO Make Connections
Connect the PYNG-CONNECT-COM to the network via the included Ethernet cable. The
PYNG-CONNECT-COM is powered via Power over Ethernet (PoE). Connection ports are
depicted in illustration .
PYNG-CONNECT-COM Ports
LAN PoE
To Security
System
DO Find Detailed Setup Information
Setup of the PYNG-CONNECT-COM is performed using the Crestron Pyng app™. The Crestron
Pyng app communicates with the PYNG-CONNECT-COM through its connection to the
PYNG-HUB (sold separately). If help is required during setup of the system, refer to the Crestron
Pyng app help screens. For information speci c to the current screen, tap in the Crestron
Pyng app to display the available help topics.
NOTE: The hostname is PYNG-C- and the last eight digits of the MAC address. The hostname
is PYNG-C-7F2ED7CB for a PYNG-CONNECT-COM with the MAC address label shown in
illustration . The MAC address label is located on the bottom of the PYNG-CONNECT-COM.
Example MAC Address
DO Learn More
Check the website for the latest rmware updates.
Crestron Electronics 15 Volvo Drive, Rockleigh, NJ 07647
888.CRESTRON | www.crestron.com
This pro duct is Lis ted to applicable U L Standa rds and req uirements by Unde rwriters Lab oratories Inc.
As of the date o f manufacture, th e PYNG-C ONNECT-COM h as been tested and f ound to comp ly with speci cations f or CE mark ing.
Federal Communications Commission (FCC) Compliance Statement
This devi ce compli es with part 15 of the FCC Ru les. Operation i s subject to the follo wing condi tions:
(1) This device m ay not cause harmf ul interf erence a nd (2) this dev ice must ac cept any interfe rence rec eived, includin g interfe rence that may caus e undesired
operation.
CAUTION: Changes or mo di cations n ot expres sly appro ved by the manu facturer respo nsible for compli ance could void the u ser’s authority to o perate the
equipment.
NOTE: This eq uipment has been t ested and f ound to comp ly with the limits for a C lass B digital devi ce, pursuant to pa rt 15 of the FCC Rul es. These limits
are desi gned to prov ide reaso nable protectio n against harmfu l interference i n a residential in stallat ion. This e quipmen t generat es, uses a nd can radi ate radio
freque ncy energ y and, if not install ed and used in acco rdance with the ins tructions, may ca use harmful inte rferen ce to radio c ommunic ations. Ho wever, there
is no guar antee that i nterference wi ll not occur in a par ticular i nstalla tion. If this e quipment does c ause harm ful interferen ce to radio or televis ion rece ption,
which ca n be determ ined by turn ing the equipment o ff and on, t he user is e ncourag ed to try to correc t the inter ference by one or mor e of the following
measures:
• Reorient or relocate the receiving antenna
• Increa se the separation b etween the equip ment and receive r
• Connec t the equipment int o an outlet o n a circuit di fferent from tha t to which the receive r is connected
• Consul t the deale r or an experience d radio/TV te chnicia n for help
DO GUIDE
Industry Canada (IC) Compliance Statement
CAN ICES-3(B)/NMB-3(B)
The Cres tron Pyng applic ation and its use by e nd-users are gover ned by both the Terms of Us e for Crestron M obile Cloud Comput ing Application s as well as the Privac y Statement for Cr estron
Mobile Clo ud Computing Appli cations which can be f ound on the Crestr on website at www.cr estron.com/l egal/mobile_cl oud_apps_t os_privacy. Cre stron product ope rating system sof tware,
including Cr estron Pyng, is l icensed to Crest ron dealers, CS Ps, and end-user s under an End-Us er License Agreeme nt which can be found on t he Crestron webs ite at www.crest ron.com/lega l/
software_license _agreement.
The speci c patents that cover Crestron products are listed at www.patents.crestron.com. Product warranty can be found at www.crestron.com/warranty.
Crestr on, the Crestron l ogo, and Crestro n Pyng are either tr ademarks or regis tered trademarks o f Crestron Elec tronics, Inc. in th e United States a nd/or other count ries. UL and the UL l ogo are
either tr ademarks or registe red trademarks of U nderwriters L aboratories, In c. in the United Stat es and/or other coun tries. Other tra demarks, register ed trademarks, and t rade names may be
used in this d ocument to refer to eit her the entities cla iming the marks and name s or their products . Crestron discla ims any proprietar y interest in the mar ks and names of other s. Crestron is
not respo nsible for errors in t ypography or ph otography.
This docum ent was written by t he Technical Publicat ions departmen t at Crestron.
©2014 Crestron Electronics, Inc.
DOC. 769 7B (204185 4) 09.14
Speci cations subject to c hange without not ice.
Loading...