Page 1
Crestron PMK-8L
Pre-Construction Wall Mount Kit
for TPMC-8L
Installation Guide
Page 2
Crestron PMK-8L Pre-Construction Wall Mount Kit
Contents
Pre-Construction Wall Mount Kit: PMK-8L 1
Description.................................................................................................................................1
Setup .......................................................................................................................................... 3
Mounting ..................................................................................................................... 3
Installation...................................................................................................................4
Other Mounting Option Accessories ........................................................................... 6
Resources................................................................................................................................... 7
Industry Compliance ...................................................................................................7
Reference Documents..................................................................................................7
Further Inquiries..........................................................................................................7
Future Updates ............................................................................................................7
Return and Warranty Policies....................................................................................................8
Merchandise Returns / Repair Service ........................................................................8
CRESTRON Limited Warranty...................................................................................8
All brand names, product names and trademarks are the property of their respective owners.
©2007 Crestron Electronics, Inc.
Installation Guide - DOC. 6590B Contents • i
Page 3
Crestron PMK-8L Pre-Construction Wall Mount Kit
Pre-Construction Wall Mount Kit:
PMK-8L
Description
The PMK-8L is a pre-construction mount kit for the Crestron Isys® TPMC-8L wall
mounted touchpanel. The PMK-8L is used for installation on a stud. For custom
touchpanel placement without a stud, use the TMK/WMKT-8L or
MMK/WMKM-8L. The PMK-8L includes a 12-inch long, 18 AWG jumper wire to
secure touchpanel cabling prior to drywall installation and to avoid damaging the
cables when the opening is routed. Refer to the physical views of the PMK-8L
shown after this paragraph. The table that follows lists all parts included with the
PMK-8L.
NOTE: This mounting kit is to be used only with the TPMC-8L wall-mounted
series of touchpanels.
Supplied Hardware for the PMK-8L
DESCRIPTION PART NUMBER QUANTITY
Metal, Plate, Pre-Construction 4504510 1
Metal, Plate, Cover 2017627 1
Screw, #04-40 x 2”, Pan, Phil 2018793 4
Jumper wire, 12”, 18 AWG, Black 2007838 1
Installation Guide - DOC. 6590B Pre-Construction Mount Kit: PMK-8L • 1
Page 4
Pre-Construction Wall Mount Kit Crestron PMK-8L
The dimensions of the PMK-8L are shown below.
Dimensional Drawing
3/8 in
(10 mm)
1/8 in
(2 mm)
7 in
(178 mm)
FOR DRYWALL NAILS (NOT INCLUDED)
FOR DRYWALL SCREWS (NOT INCLUDED)
#04-40
TAPPED HOLE
IN EACH
SECURE 18 AWG
JUMPER WIRE IN
NOTCH TO HANG
CABLES AWAY FROM
CUTTING TOOLS
(30.16 cm)
3/16 in
(5 mm)
1/2 in
(13 mm)
6 1/16 in
(154 mm)
CORNER
11.88 in
9 1/16 in
(231 mm)
7 3/4 in
(196 mm)
8.82 in
(22.40 cm)
8 11/16 in
(221 mm)
FOR DRYWALL NAILS
OR SCREWS
(NOT INCLUDED)
6 13/16 in
(173 mm)
Dimensional Drawing - Cover Plate
10.00 in
(25.40 cm)
0.03 in
(0.08 cm)
7.80 in
(19.82 cm)
2 • Pre-Construction Mount Kit: PMK-8L Installation Guide - DOC. 6590B
Page 5
Crestron PMK-8L Pre-Construction Wall Mount Kit
Setup
Mounting
The PMK-8L consists of a single metal plate, which fastens to the stud of a framed
wall prior to hanging drywall. Standard drywall nails or screws to attach the
PMK-8L are not supplied (length can vary).
The plate is designed to provide the necessary support for a single touchpanel and
can mount to the right or left side of a stud. Confirm that the PMK-8L is level before
applying drywall.
Mounting the PMK-8L
PMK-8L
PRE-CONSTRUCTION
MOUNTING PLATE
(4504510)
NOTE: BE SURE THE
PLATE IS LEVEL WHEN
MOUNTED
CAUTION: Allow an air gap of at least 12 inches (30.48 cm) in the wall cavity
above and below the touchpanel for heat dissipation.
After drywall is positioned, a rectangular opening must be made. Position the
opening to expose the #40-40 tapped holes in each corner.
NOTE: Cut the drywall along the inside edge of the front of the mounting plate.
The labels on the front of the mounting plate indicate the perimeter of the opening
that should be cutout. Refer to the NOTE in “Mounting the PMK-8L” shown on the
illustration above.
Installation Guide - DOC. 6590B Pre-Construction Mount Kit: PMK-8L • 3
Page 6
Pre-Construction Wall Mount Kit Crestron PMK-8L
Mounted View with Cover Plate (Mounting Example Prior to Drywall Installation)
STUD
PRE-CONSTRUCTION
MOUNTING PLATE
(4504510)
MUST BE LEVEL BEFORE
APPLICATION OF DRYWALL
DRYWALL
SCREWS (4) #04-40 X 2"
PAN HEAD (2018793)
METAL COVER PLATE (2017627)
TO COVER CUTOUT IN DRYWALL
BEFORE TOUCHPANEL IS
INSTALLED (MAY BE REQUIRED BY
LOCAL BUILDING CODES)
NOTE: MOUNTING PLATE IS TO BE
COVERED WITH DRYW ALL AND THEN
THE CUTOUT MADE AROUND THE
INSIDE OF THE OPENING. BE SURE TO
LEAVE THE FOUR TAPPED HOLES ON
THE FRONT OF THE BOX EXPOSED TO
ACCEPT THE MOUNTING SCREWS.
NOTE: The four tapped holes on the front of the mounting plate must be exposed to
accept the touchpanel mounting screws. These holes are found beneath the drywall
just outside the four corners of the opening made by cutting out the drywall. Refer to
the NOTE in “Mounted View with Cover Plate” illustration above.
Installation
Complete the installation by either installing the touchpanel, leaving the hole open (if
permitted by local building codes) or installing the optional cover plate with the
included #04-40 x 2” screws. If the touchpanel is to be installed, refer to the latest
revision of the TPMC-8L Operations Guide (Doc. 6594) for installation instructions.
The document is available from the Crestron website
(http://www.crestron.com/manuals
the following page.
). Refer also to the comprehensive illustration on
4 • Pre-Construction Mount Kit: PMK-8L Installation Guide - DOC. 6590B
Page 7
Crestron PMK-8L Pre-Construction Wall Mount Kit
Touchpanel Mounting – Exploded View
PMK-8L
DRYWALL
TPMC-8L
TPMC-8L
MOUNTING SCREWS
(4) #04-40 X 2"
(2018793)
Installation Guide - DOC. 6590B Pre-Construction Mount Kit: PMK-8L • 5
Page 8
Pre-Construction Wall Mount Kit Crestron PMK-8L
Other Mounting Option Accessories
If too much of the mounting plate is exposed after the drywall is cut, you may need
to patch the area. Crestron provides the following accessories:
• MMK-8L (Doc. 6591) - for larger repairs and to fill in larger irregularities
around the opening (requires plastering).
• TMK-8L (Doc. 6592) - for smaller repairs and to provide a smooth edge at
the opening. This option provides a finished appearance and is preferred
when wallpaper is hung.
The manuals for the MMK-8L and TMK-8L are available from the Crestron website.
6 • Pre-Construction Mount Kit: PMK-8L Installation Guide - DOC. 6590B
Page 9
Crestron PMK-8L Pre-Construction Wall Mount Kit
Resources
Industry Compliance
As of the date of manufacture, the PMK-8L has been tested and found to comply
with specifications for CE marking marking.
Reference Documents
The latest version of all documents mentioned within the guide can be obtained from
the Crestron website (http://www.crestron.com/manuals
of product manuals arranged in alphabetical order by model number.
List of Related Reference Documents
DOCUMENT TITLE
MMK-8L Mud Mount Kit
TMK-8L Trim Ring Mount Kit
TPMC-8L Isys i/O™ 8.4" Wall Mount Touchpanel Media Center
). This link will provide a list
Further Inquiries
If you cannot locate specific information or have questions after reviewing this
guide, please take advantage of Crestron's award winning customer service team by
calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
For assistance in your local time zone, refer to the Crestron website
(www.crestron.com/offices
You can also log onto the online help section of the Crestron website
(www.crestron.com/onlinehelp
users will need to establish a user account to fully benefit from all available features.
) for a listing of Crestron worldwide offices.
) to ask questions about Crestron products. First-time
Future Updates
As Crestron adds improvements to the PMK-8L additional information may be made
available as manual updates. These updates are solely electronic and serve as
intermediary supplements prior to the release of a complete technical documentation
revision.
Check the Crestron website periodically for manual update availability and its
relevance. Updates are identified as an “Addendum” in the Download column.
Installation Guide - DOC. 6590B Pre-Construction Mount Kit: PMK-8L • 7
Page 10
Pre-Construction Wall Mount Kit Crestron PMK-8L
Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange or service without prior authorization
from CRESTRON. To obtain warranty service for CRESTRON products, contact an
authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory
and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying
the nature of the problem, name and phone number of contact person, RMA number and
return address.
2. Products may be returned for credit, exchange or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight
prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with
RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect
or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its
sole and absolute discretion to charge a 15% restocking fee plus shipping costs on any
products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be paid by CRESTRON,
shipping by standard ground carrier. In the event repairs are found to be non-warranty, return
freight costs shall be paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials
and workmanship under normal use for a period of three (3) years from the date of purchase from
CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical
parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and
overlay components are covered for 90 days; batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON
dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if
any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended or if it has been subjected to misuse, accidental
damage, modification or improper installation procedures. Furthermore, this warranty does not cover any
product that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic damages
inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim made by a
third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or
labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the
unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or
implied, nor authorizes any other party to offer any warranty, including any implied warranties of
merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law are
limited to the terms of this limited warranty. This warranty statement supersedes all previous warranties.
Trademark Information
All brand names, product names and trademarks are the sole property of their respective owners. Windows is a registered trademark
of Microsoft Corporation. Windows95/98/Me/XP/Vista and WindowsNT/2000 are trademarks of Microsoft Corporation.
8 • Pre-Construction Mount Kit: PMK-8L Installation Guide - DOC. 6590B
Page 11
Crestron PMK-8L Pre-Construction Wall Mount Kit
This page is intentionally left blank.
Installation Guide - DOC. 6590B Pre-Construction Mount Kit: PMK-8L • 9
Page 12
Crestron Electronics, Inc. Installation Guide – DOC. 6590B
15 Volvo Drive Rockleigh, NJ 07647 (2018095)
Tel: 888.CRESTRON 10.07
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Loading...