Crestron PMK-3100L User Manual

Pre-Construction Mount Kit: PMK-3100L

Description

The PMK-3100L is a pre-construction mount kit for the
Crestron Isys® TPS-3100L series of wall mounted
touchpanels. The PMK-3100L is used for installation on a
stud. For custom touchpanel placement without a stud,
use the WMKT-3100L or the WMKM-3100L. The PMK­3100L includes an 18 AWG bus wire to secure
touchpanel cabling prior to drywall installation and to
avoid damaging the cables when the opening is routed.
Refer to the physical views (bottom, side, and front) of
the PMK-3100L, shown after this paragraph. The table
that follows lists all parts included with the PMK-3100L.

NOTE: This mounting kit is to be used only with the
TPS-3100L series of touchpanels.

PMK-3100L Physical Views

FOR DRYWALL NAIL

(PROVIDED BY OTHER)

FOR DRYWALL NAIL
(PROVIDED BY OTHER)

FOR DRYWALL NAIL

(PROVIDED BY OTHER)

FOR DRYWALL SCREW
(PROVIDED BY OTHER)

SECURE 18 AWG BUS WIRE
IN NOTCH TO HANG CABLES
AWAY FROM DRYWALL
CUTTING TOOLS.

FOR DRYWALL SCREW
(PROVIDED BY OTHER)

10.81 in

(27.46 cm)

6.50 in

(16.50 cm)

drywall (shown after this paragraph). Standard drywall
nails or screws to attach the PMK-3100L are not supplied
(length can vary).

Metal Plate Secured to Stud

The plate is designed to provide the necessary support for
a single touchpanel and can mount to the right or left side
of a stud. Confirm that the PMK-3100L is level before
application of drywall. A rectangular opening with the
dimensions shown in the illustration after this paragraph
must be made in the drywall. Verify that the opening
exposes the #6-32 tapped holes in each corner.

Dimensions for Drywall Cutout

PINS USED WITH OPTIONAL
MUD RING 2004825
(PART OF MMK/WMKM-3100L)

COVER PLATE 2010622

0.03 in

(0.08 cm)

8.00 in

(20.32 cm)

Supplied Components

DESCRIPTION PART NUMBER QUANTITY

Metal, Plate, Mounting 2010617 1

Metal, Plate,Cover 2010622 1

Screw, #6-32, 1-1/2”L, Pan, Phil 2007254 4

Jumper wire, 12”L, 18AWG, Black 2007838 1

5.88 in

(14.92 cm)

1

1

in

8

(28 mm)

If the opening for the touchpanel in the drywall is too

DO NOT EXCEED THIS DIMENSION

8 in MAX

(203 mm MAX)

large, two pre-construction accessories are available to
make adjustments. Use the optional TMK-3100L (Trim
Ring Kit) to provide a smooth edge at the opening. This
option provides a finished appearance and is preferred
when wallpaper is hung. Use the optional MMK-3100L
(Mud Ring Kit) to fill in larger irregularities around the

(149 mm MAX)
DO NOT EXCEED
THIS DIMENSION

1

in

5

2

(139 mm)

7

5

in MAX

8

opening (requires plastering).

Complete the installation by either installing the

Installation

The PMK-3100L consists of a single metal plate, which
fastens to the stud of a framed wall prior to hanging

Crestron Electronics, Inc. Installation Guide – DOC. 6297

15 Volvo Drive Rockleigh, NJ 07647 09.04
Tel: 888.CRESTRON
Fax: [phone] Specifications subject to
www.crestron.com change without notice.

touchpanel, leaving the hole open (if permitted by local
building codes), or installing the supplied cover plate with
the included #6-32 x 1½” screws (shown after this

Pre-Construction Mount Kit Crestron PMK-3100L

paragraph). If the touchpanel is to be installed, refer to the
latest revision of the TPS-3100L Operations &
Installation Guide (Doc. 6291) for installation
instructions.

Attaching Cover

PRE-CONSTRUCTION PLATE (2010617)

MUST BE LEVEL BEFORE APPLICATION OF

METAL COVER PLATE (2010622)

SHEET ROCK

DRYWALL

(4) #6-32 X 1-

PAN HEAD SCREW

1

(2007254)

"L

2

STUD

Further Inquiries

If after reviewing this sheet, you cannot locate specific
information or have questions, please take advantage of
Crestron's award winning customer service team by
calling:

• In the US and Canada, call Crestron’s corporate
headquarters at 1-888-CRESTRON
[1-888-273-7876].

• In Europe, call Crestron International at
[phone].

• In Asia, call Crestron Asia at [phone].

• In Latin America, call Crestron Latin America at

[phone].

• In Australia and New Zealand, call Crestron
Control Solutions at [phone].

You can also log onto the online help section of the
Crestron website (www.crestron.com
about Crestron products. First-time users will need to
establish a user account to fully benefit from all available
features.

As of the date of manufacture, the PMK-3100L has been
tested and found to comply with specifications for CE
marking.

) to ask questions

Return and Warranty Policies

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange, or
service without prior authorization from CRESTRON. To
obtain warranty service for CRESTRON products, contact
the factory and request an RMA (Return Merchandise
Authorization) number. Enclose a note specifying the nature
of the problem, name and phone number of contact person,
RMA number, and return address.

2. Products may be returned for credit, exchange, or service
with a CRESTRON Return Merchandise Authorization
(RMA) number. Authorized returns must be shipped freight
prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J., or
its authorized subsidiaries, with RMA number clearly marked
on the outside of all cartons. Shipments arriving freight
collect or without an RMA number shall be subject to refusal.
CRESTRON reserves the right in its sole and absolute
discretion to charge a 15% restocking fee, plus shipping
costs, on any products returned with an RMA.

3. Return freight charges following repair of items under
warranty shall be paid by CRESTRON, shipping by standard
ground carrier. In the event repairs are found to be non-

CRESTRON Limited Warranty

CRESTRON ELECTRONICS, Inc. warrants its products to be free from
manufacturing defects in materials and workmanship under normal use
for a period of three (3) years from the date of purchase from
CRESTRON, with the following exceptions: disk drives and any other
moving or rotating mechanical parts, pan/tilt heads and power supplies
are covered for a period of one (1) year; touchscreen display and overlay
components are covered for 90 days; batteries and incandescent lamps
are not covered.

This warranty extends to products purchased directly from CRESTRON
or an authorized CRESTRON dealer. Purchasers should inquire of the
dealer regarding the nature and extent of the dealer's warranty, if any.

CRESTRON shall not be liable to honor the terms of this warranty if the
product has been used in any application other than that for which it was
intended, or if it has been subjected to misuse, accidental damage,
modification, or improper installation procedures. Furthermore, this
warranty does not cover any product that has had the serial number
altered, defaced, or removed.

This warranty shall be the sole and exclusive remedy to the original
purchaser. In no event shall CRESTRON be liable for incidental or
consequential damages of any kind (property or economic damages
inclusive) arising from the sale or use of this equipment. CRESTRON is
not liable for any claim made by a third party or made by the purchaser
for a third party.

CRESTRON shall, at its option, repair or replace any product found
defective, without charge for parts or labor. Repaired or replaced
equipment and parts supplied under this warranty shall be covered only
by the unexpired portion of the warranty.

Except as expressly set forth in this warranty, CRESTRON makes no
other warranties, expressed or implied, nor authorizes any other party to
offer any warranty, including any implied warranties of merchantability
or fitness for a particular purpose. Any implied warranties that may be
imposed by law are limited to the terms of this limited warranty. This
warranty statement supercedes all previous warranties.

Trademark Information

All brand names, product names, and trademarks are the sole property of their respective
owners. Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP
and WindowsNT/2000 are trademarks of Microsoft Corporation.

warranty, return freight costs shall be paid by the purchaser.

2 • Pre-Construction Mount Kit: PMK-3100L Installation Guide – DOC. 6297