Crestron PMK-3000L User Manual

Pre-Construction Mount Kit: PMK-3000L

Description

The PMK-3000L is a pre-construction mount kit for the
Crestron Isys™ TPS-3000L, wall mounted touchpanel.
The PMK-3000L includes an 18 AWG bus wire to secure
touchpanel cabling during drywall installation and to
avoid damaging the cables when the opening is routed.
Refer to the physical views (top, side, and front) of the
PMK-3000L, shown after this paragraph. The table that
follows lists all parts included with the PMK-3000L.

Metal Plate Secured to Stud

PMK-3000L Physical Views

FOR DRYWALL NAIL

(PROVIDED BY OTHER)

FOR DRYWALL NAIL
(PROVIDED BY OTHER)

FOR DRYWALL SCREW
(PROVIDED BY OTHER)

FOR DRYWALL NAIL

(PROVIDED BY OTHER)

21/32" STUD OFFSET

(17 mm)

PINS USED WITH OPTIONAL MUDRING (MTPL02850-1)

FOR DRYWALL SCREW
(PROVIDED BY OTHER)

SECURE 18 AWG BUS WIRE
IN NOTCH TO HANG CABLE AWAY
FROM DRYWALL CUTTING TOOLS

4.88 in

4.12 in

(10.47 cm)

COVER PLATE MTCV02883-1

9.00 in

(22.86 cm)

(12.38 cm)

11.59 in

(29.44 cm)

(18.73 cm)

7.375 in

7.30 in

(18.54 cm)

0.03 in

(0.08 cm)

0.27 in

(0.69 cm)

0.06 in THICK

7.84 in

(19.91 cm)

(0.15 cm)

Supplied Components

DESCRIPTION PART NUMBER QUANTITY

Metal, Plate, Mounting MTPL02849-1 1

Metal, Plate,Cover MTCV02883-1 1

Screw, #6-32, 1 1/2”Lg, Pan, Phil SR06-32-1R5000-2 4

Jumper wire, 12”Lg, 18AWG,

WCUSJU18-5 1

Installation

The PMK-3000L consists of a single metal plate, which
fastens to the stud of a framed wall prior to hanging
drywall (shown after this paragraph). Standard drywall
nails or screws to attach the PMK-3000L are not supplied
(length can vary).

The plate is designed to provide the necessary support for
a single touchpanel and can mount to the right or left side
of a stud. Confirm that the PMK-3000L is level before
application of drywall. A rectangular opening with the
dimensions shown in the illustration after this paragraph
must be made in the drywall. Verify that the opening
exposes the #6-32 tapped holes in each corner.

Dimensions for Drywall Cutout

If the opening for the touchpanel in the drywall is too
large, two pre-construction accessories are available to
make adjustments. Use the optional TMK-3000L (Trim
Ring Kit) to provide a smooth edge at the opening. This
option provides a finished appearance and is preferred
when wallpaper is hung. Use the optional MMK-3000L
(Mud Ring Kit) to fill in larger irregularities around the
opening (requires plastering).

Complete the installation by either installing the
touchpanel, leaving the hole open (if permitted by local
building codes), or installing the supplied cover plate with
#6-32 x 1½” screws (shown after this paragraph).

Crestron Electronics, Inc. Installation Guide – DOC. 6024

15 Volvo Drive Rockleigh, NJ 07647 10.02
Tel: 888.CRESTRON
Fax: [phone] Specifications subject to
www.crestron.com change without notice.

Pre-Construction Mount Kit Crestron PMK-3000L

Attaching Cover

PRE-CONSTRUCTION PLATE MTPL02849-1
MUST BE LEVEL BEFORE APPLICATION OF

METAL COVER PLATE MTCV02883-1

(4) #6-32 X 1-1/2"L
PAN HEAD SCREW
(SR06-32-1R5000-2)

SHEET ROCK

DRYWALL

STUD

Finished Installation

Further Inquiries

If after reviewing this sheet, you cannot locate specific
information or have questions, please take advantage of
Crestron's award winning customer service team by
calling:

• In the US and Canada, call Crestron’s corporate
headquarters at 1-888-CRESTRON
[1-888-273-7876].

• In Europe, call Crestron International at
[phone].

• In Asia, call Crestron Asia at [phone].

• In Latin America, call Crestron Latin America at

[phone].

• In Australia and New Zealand, call Crestron
Pacific at [phone].

As of the date of manufacture, the PMK-3000L has been
tested and found to comply with specifications for CE
marking.

Return and Warranty Policies

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange, or
service without prior authorization from CRESTRON. To
obtain warranty service for CRESTRON products, contact
the factory and request an RMA (Return Merchandise
Authorization) number. Enclose a note specifying the nature
of the problem, name and phone number of contact person,
RMA number, and return address.

2. Products may be returned for credit, exchange, or service
with a CRESTRON Return Merchandise Authorization
(RMA) number. Authorized returns must be shipped freight
prepaid to CRESTRON, Cresskill, N.J., or its authorized
subsidiaries, with RMA number clearly marked on the
outside of all cartons. Shipments arriving freight collect or
without an RMA number shall be subject to refusal.
CRESTRON reserves the right in its sole and absolute
discretion to charge a 15% restocking fee, plus shipping
costs, on any products returned with an RMA.

3. Return freight charges following repair of items under
warranty shall be paid by CRESTRON, shipping by standard
ground carrier. In the event repairs are found to be non­warranty, return freight costs shall be paid by the purchaser.

CRESTRON Limited Warranty

CRESTRON ELECTRONICS, Inc. warrants its products to be free from
manufacturing defects in materials and workmanship under normal use
for a period of three (3) years from the date of purchase from
CRESTRON, with the following exceptions: disk drives and any other
moving or rotating mechanical parts, pan/tilt heads and power supplies
are covered for a period of one (1) year; touchscreen display and overlay
components are covered for 90 days; batteries and incandescent lamps
are not covered.

This warranty extends to products purchased directly from CRESTRON
or an authorized CRESTRON dealer. Purchasers should inquire of the
dealer regarding the nature and extent of the dealer's warranty, if any.

CRESTRON shall not be liable to honor the terms of this warranty if the
product has been used in any application other than that for which it was
intended, or if it has been subjected to misuse, accidental damage,
modification, or improper installation procedures. Furthermore, this
warranty does not cover any product that has had the serial number
altered, defaced, or removed.

This warranty shall be the sole and exclusive remedy to the original
purchaser. In no event shall CRESTRON be liable for incidental or
consequential damages of any kind (property or economic damages
inclusive) arising from the sale or use of this equipment. CRESTRON is
not liable for any claim made by a third party or made by the purchaser
for a third party.

CRESTRON shall, at its option, repair or replace any product found
defective, without charge for parts or labor. Repaired or replaced
equipment and parts supplied under this warranty shall be covered only
by the unexpired portion of the warranty.

Except as expressly set forth in this warranty, CRESTRON makes no
other warranties, expressed or implied, nor authorizes any other party to
offer any other party to offer any warranty, including any implied
warranties of merchantability or fitness for a particular purpose. Any
implied warranties that may be imposed by law are limited to the terms
of this limited warranty. This warranty statement supercedes all previous
warranties.

Trademark Information

All brand names, product names, and trademarks are the sole property of their respective
owners. Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP
and WindowsNT/2000 are trademarks of Microsoft Corporation.

2 • Pre-Construction Mount Kit: PMK-3000L Installation Guide – DOC. 6024