Crestron PMK-1000L User Manual

Pre-Construction Mount Kit: PMK-1000L

The PMK-1000L is a pre-construction mount kit that has been developed for the Series 1000 Wall Mounted
Touchpanels. Refer to the physical views (top, side, and front) of the PMK-1000L, shown below.

7.31 in

.06 in

(15.24 cm)

(18.57 cm)

PINS USED WITH
OPTIONAL MMK-1000L

2.88 in

(7.31 cm)

Assembled View

The PMK-1000L consists of a single metal plate, shown above, which can be fastened to the stud of a framed wall
prior to hanging drywall. The plate is designed to provide the necessary support for a single touchpanel and can
mount to the right or left side of a stud. Standard drywall nails or screws to attach the PMK-1000L are not supplied
(length can vary). The PMK-1000L includes an 18 AWG bus wire to secure touchpanel cabling during drywall
installation and to avoid damaging the cables when the opening is routed. Confirm that the PMK-1000L is level
before application of sheet rock.

FOR DRYWALL

FOR DRYWALL

SCREW

FOR DRYWALL NAIL

FOR DRYWALL

1.00 in

(2.54 cm)

SCREW

FOR DRYWALL

NAIL

NAIL

2.41 in

(6.12 cm)

3.90 in

(9.92 cm)

#4-40 TAPPED HOLE
4 PLACES

DIMENSIONS

4 7/16 in
(113mm)

(113 mm)

21/32 in
(17mm)

STUD OFFSET

(0.86 cm)

CUTOUT

4 7/16 in

SECURE 18 AWG BUS WIRE IN

NOTCH TO HANG CABLES AWAY

FROM DRYWALL CUTTING TOOLS

0.34 in

5.09 in

(12.92 cm)

5.77 in

(14.66 cm)

PRE-CONSTRUCTION PLATE

MUST BE LEVEL BEFORE

APPLICATION OF DRYWALL

STUD

PMK-1000L

NOTE: This device must be installed in accordance with local building codes.

A rectangular opening with the dimensions shown above must be made in the drywall. Verify that the opening
exposes the #4-40 tapped holes in each corner. Complete the installation by either installing the touchpanel, leaving
the hole open (if permitted by local building codes), or installing the supplied cover plate with the supplied
#4-40 x 1½” screws.

If the opening for the touchpanel in the drywall is too large, two pre-construction accessories are available to make
adjustments. Use the optional TMK-1000L (Trim Ring Kit) to provide a smooth edge at the opening. This option
provides a finished appearance and is preferred when wallpaper is hung. Use the optional MMK-1000L (Mud Ring
Kit) to fill in larger irregularities around the opening (requires plastering).

Further Inquiries

If after reviewing this sheet, you cannot locate specific information or have questions, please take advantage of
Crestron's award winning customer service team by calling:

• In the US and Canada, call Crestron’s corporate headquarters at
1-888-CRESTRON [1-888-273-7876].

• In Europe, call Crestron International at [phone].

• In Asia, call Crestron Asia at [phone].

• In Latin America, call Crestron Latin America at [phone].

• In Australia and New Zealand, call Crestron Pacific at [phone].

As of the date of manufacture, the PMK-3000L has been tested and found to comply with specifications for CE
marking.

Crestron Electronics, Inc. Installation Guide – DOC. 6061

15 Volvo Drive Pre-Construction Mount Kit: PMK-1000L
Rockleigh, NJ 07647 11.02
Tel: 888.CRESTRON Specifications subject to change without notice.
Fax: [phone] www.crestron.com

Return and Warranty Policies

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange, or service without prior
authorization from CRESTRON. To obtain warranty service for CRESTRON
products, contact the factory and request an RMA (Return Merchandise
Authorization) number. Enclose a note specifying the nature of the problem,
name and phone number of contact person, RMA number, and return address.

2. Products may be returned for credit, exchange, or service with a CRESTRON
Return Merchandise Authorization (RMA) number. Authorized returns must be
shipped freight prepaid to CRESTRON, Cresskill, N.J., or its authorized
subsidiaries, with RMA number clearly marked on the outside of all cartons.
Shipments arriving freight collect or without an RMA number shall be subject to
refusal. CRESTRON reserves the right in its sole and absolute discretion to
charge a 15% restocking fee, plus shipping costs, on any products returned with
an RMA.

3. Return freight charges following repair of items under warranty shall be paid by
CRESTRON, shipping by standard ground carrier. In the event repairs are found
to be non-warranty, return freight costs shall be paid by the purchaser.

CRESTRON Limited Warranty

CRESTRON ELECTRONICS, Inc. warrants its products to be free from
manufacturing defects in materials and workmanship under normal use for a period
of three (3) years from the date of purchase from CRESTRON, with the following
exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt
heads and power supplies are covered for a period of one (1) year; touchscreen
display and overlay components are covered for 90 days; batteries and incandescent
lamps are not covered.

This warranty extends to products purchased directly from CRESTRON or an
authorized CRESTRON dealer. Purchasers should inquire of the dealer regarding the
nature and extent of the dealer's warranty, if any.

CRESTRON shall not be liable to honor the terms of this warranty if the product has
been used in any application other than that for which it was intended, or if it has
been subjected to misuse, accidental damage, modification, or improper installation
procedures. Furthermore, this warranty does not cover any product that has had the
serial number altered, defaced, or removed.

This warranty shall be the sole and exclusive remedy to the original purchaser. In no
event shall CRESTRON be liable for incidental or consequential damages of any
kind (property or economic damages inclusive) arising from the sale or use of this
equipment. CRESTRON is not liable for any claim made by a third party or made by
the purchaser for a third party.

CRESTRON shall, at its option, repair or replace any product found defective,
without charge for parts or labor. Repaired or replaced equipment and parts supplied
under this warranty shall be covered only by the unexpired portion of the warranty.

Except as expressly set forth in this warranty, CRESTRON makes no other
warranties, expressed or implied, nor authorizes any other party to offer any
warranty, including any implied warranties of merchantability or fitness for a
particular purpose. Any implied warranties that may be imposed by law are limited
to the terms of this limited warranty. This warranty statement supercedes all previous
warranties.

Trademark Information

All brand names, product names, and trademarks are the sole property of their respective owners.
Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP and
WindowsNT/2000 are trademarks of Microsoft Corporation.