Crestron MPS-200 Operating Manual
Crestron MPS-200 Multimedia Presentation System 200
Multimedia Presentation
System 200: MPS-200
Purpose
The purpose of this addendum is to provide correction to errant information supplied
with the original MPS-200 Operations Guide (Doc. 6528B). Specifically, this
addendum corrects a block diagram showing the audio capabilities of the MPS-200
on page 6.
Block Diagram
The block diagram showing the audio capabilities of the MPS-200 is incorrect. The
correct diagram should be shown as:
Corrected Audio Block Diagram of the MPS-200
AUDIO INPUTS
Stereo Audio
1
Stereo Audio
2
Stereo Audio
3
Stereo Audio
4
Stereo Audio
5
Stereo Audio
6
Stereo Audio
7
Stereo Audio
8
Local Mic
1
With Phantom Power
Local Mic
2
With Phantom Power
Gating
Gating
8x2
Matrix
Switch
A/D
A/D
A/D
A/D
Vol/EQ
AUDIO OUTPUTS
20Wx2
Amp
40W
Amp
QM OUT 2
(Touchpanel)
4/8Ω Model
Program L
Program R
Speech
70V/100V Models
70V/100V
Record L
Record R
L
R
Stereo
L
Vol/EQ
Stereo Mixer
4 Channel
R
Vol/EQ
Mono Mixer
4 Channel
Stereo Mixer
4 Channel
Delay
Vol/EQ
Mic 1
Mic 2
D/A
D/A
D/A Mute
D/A
D/A
QM Audio
Combiner
Mute
Mute
NOTE: The MPS-200-70V and MPS-200-100V amplify the SPEECH output audio
path while the MPS-200 amplifies the PROGRAM output audio path.
Addendum #1 for DOC. 6528B
Crestron Electronics, Inc. DOC. 6652
15 Volvo Drive Rockleigh, NJ 07647 (2020336)
Tel: 888.CRESTRON 12.07
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Loading...