Crestron LC-WPK Operating Manual

Water Resistant Cover Kit for Series 1000: CT/LC-WPK
The Crestron water resistant cover kit for the Series 1000 touchpanel provides a urethane cover for a mounted panel. There are four covers per kit. When properly installed the cover prevents liquids and other air-born materials from settling directly onto the panel, but does not interfere with regular usage of the unit.
1. Remove the backing from the tape that surrounds
MOUNTING
SURFACE
CT/LC-WPK
COVER
INSTALLED
SERIES 1000
TOUCHPANEL
LOCATION
GAP
the perimeter of the cover.
2. Place the cover over the panel making sure that the gap in the tape perimeter is located at the bottom.
3. Firmly press down the cover so that it completely encloses the touchpanel.
4. Except for the gap at the bottom, apply a bead of silicone rubber adhesive around the outer edge of the cover (form a seal with the mounting surface).
5. Do not use the touch­panel while the adhesive cures (typically 24 hours).
WARNING: Silicone rubber adhesive is an irritant to skin, eyes, and respiratory tract. Skin and eye protection required. Avoid repeated or prolonged contact. Good ventilation is required.
WARNING: To avoid shock hazard and possible damage to the unit, never install a touchpanel where it may be exposed to rain or very high humidity. This kit is designed to resist water (eg. protect unit from wet hands) and in no way provides waterproof protection.
Further Inquiries
If you still have questions after reviewing this sheet, please take advantage of Crestron's award winning customer service team by calling
1-888-CRESTRON [1-888-273-7876]. For assistance in your local time zone, refer to the Crestron website (http://www.crestron.com
) for a listing of Crestron worldwide offices.
You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features.
Crestron Electronics, Inc. Water Resistant Cover Kit for Series 1000: CT/LC-WPK
15 Volvo Drive DOC. 5932 Rockleigh, NJ 07647 04.01 Tel: 888.CRESTRON Specifications subject to change without notice. Fax: 201.767.7576 www.crestron.com
the Crestron corporate headquarters at
Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address.
2. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J., or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. Furthermore, this warranty does not cover any product that has had the serial number altered, defaced, or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall CRESTRON be liable for incidental or consequential damages of any kind (property or economic damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim made by a third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or implied, nor authorizes any other party to offer any warranty, including any implied warranties of merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law are limited to the terms of this limited warranty. This warranty statement supercedes all previous warranties.
Trademark Information
All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation.
Loading...