Crestron CPC-LMT User Manual

Contents

Lens Mount Accessory: CPC-LMT 1

Description ..........................................................................................................................1

Installation...........................................................................................................................2

Problem Solving...................................................................................................................5

Return Warranty Policies ...................................................................................................... 6

Functional Description............................................................................................ 1

Physical Description...............................................................................................1

CPC-LMT Exploded View......................................................................................4

Troubleshooting .....................................................................................................5

Further inquiries.....................................................................................................5

Merchandise Returns / Repair Service.....................................................................6

CRESTRON Limited Warranty............................................................................... 6

Operations & Installation Guide - DOC. 5758 Contents •• i

Lens Mount Accessory:
CPC-LMT

Description

Functional Description

The CPC-LMT is an accessory for the Crestron CPC-CAMI. This accessory
provides simple flexibility in mounting a camera/lens assembly. Its unique design
eliminates the need for custom plate assemblies. The CPC-LMT mounts quickly and
rigidly supports both camera and lens.

Physical Description

The CPC-LMT is constructed of anodized aluminum and finished in a semi-gloss
black color. The CPC-LMT consists mainly of three mounting plates that have
adjustable mounting hole spacing. This allows the CPC-LMT to adjust quickly to
different camera/lens assemblies

CPC-LMT: Physical View

Operations & Installation Guide - DOC. 5758 Lens Mount Accessory: CPC-LMT •• 1

Installation

QTY.

ITEM

The CPC-LMT is delivered assembled. Depending on the camera and lens that is
going to be used, the CPC-LMT requires adjustment. The parts bag shipped with the
unit includes tools for adjustments and a spacer for camera mounting. A Phillips tip
screwdriver and hex keys (supplied) are all the hand tools necessary to mount the
CPC-LMT.

Parts Bag Contents

1 Hex Key (9/64)
1 Hex Key (.050)
1 Hex Key (5/32)
1 Screw 1/4-20x3/4
1 Spacer

NOTE: Before beginning this installation, remove the mounting plates from the
CPC-CAMI and retain the two ¼-20 x 3/8 mounting screws. The CPC-LMT is
installed using these two ¼-20 x 3/8 mounting screws.

Important:

Call-out numbers refer
to the "CPC-LMT Exploded
View" on page 4,
unless noted otherwise.

1. Assemble the camera and lens to be mounted. Align the camera and lens

mounting holes. Note the distance between the camera and lens mounting
screws and make sure that they fit into the Adjustment Slots of the Camera
Plate (5). There should be excess room to allow for forward/backward
adjustment.

2. Determine the center balance point of the camera/lens assembly. This can be

achieved by placing the camera/lens on a flat surface and inserting a pencil or similar
object beneath the assembly to determine the balance point. Note the balance point.
It should be located at the center of rotation on the CPC-CAMI. The center of
rotation is indicated by Pins (16) on the Platform Support Bracket (1).

3. In most cases the Lens (14) is physically larger than the Camera (15). If so, discard

Spacer (12). If the Camera (15) is larger than the Lens (14), Spacer (12) should be
used as shown below.

Proper Use of Spacer

NOTE: If Spacer (12) is used, the ¾ inch long Screw (11A) must be used.

4. Remove Camera Support Rod (9) from the CPC-LMT assembly by loosening

Locking Screw (13).

2 •• Lens Mount Accessory: CPC-LMT Operations & Installation Guide - DOC. 5758

5. Screw the Camera Support Rod (9) into the camera's mounting hole. If the camera

has multiple mounting holes, choose the hole that allows the Adjustment Block (8)
to fit into the adjustment slot in the Camera Mount Plate (5).

6. Insert Camera Support Rod (9) into the in the Adjustment Block (8).

7. Position the camera /lens assembly (14) and (15) on the Camera Mounting Plate

(5).

8. Insert the Adjustment Block (8) into the adjustment slot of the Camera Mount

Plate (5).

9. Position the camera/lens assembly so the balance point is as close to Mounting

Block (6) as possible.

10. Tighten lens Screw (11) or (11A) with a Phillips tip screwdriver.

11. Tighten Locking Screws (10) and (13) with the hex keys provided.

12. Hex Screws (4) and washers (17) provide additional front to back adjustment. If

necessary, select a pair of holes in the Interim Plate (3) that would allow proper
balancing.

13. The CPC-LMT has two width adjustments. Use either the Adjustment Block (6) or

the slots in the Platform Support Arm (1) to adjust for various camera/lens widths.

14. After proper positioning of the camera/lens assembly, tighten Screws (4) and (17).

15. The camera/lens and CPC-LMT are now one assembly. Adjust the assembly's height

to align the center of the lens with the center of tilt rotation.

16. Check all CPC-LMT screws for tightness.

17. Fit the camera and CPC-LMT assembly onto the CPC-CAMI by aligning the Pins

(16) with the slots of the CPC-CAMI.

18. Secure the CPC-LMT to the CPC-CAMI with the two ¼-20 Screws (2).

Operations & Installation Guide - DOC. 5758 Lens Mount Accessory: CPC-LMT •• 3

CPC-LMT Exploded View

4 •• Lens Mount Accessory: CPC-LMT Operations & Installation Guide - DOC. 5758

Problem Solving

Troubleshooting

The CPC-LMT is designed to be flexible enough to mount to most camera/lens
configurations. If further assistance is required, please contact a Crestron technical
support representative. Refer to "Further Inquiries" below.

Further Inquiries

If after reviewing this Operations & Installation Guide, you cannot locate specific
information or have questions, please take advantage of Crestron's award winning
technical support team by calling:

• In the US and Canada, call Crestron’s corporate headquarters at

1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400.

• In Europe, call Crestron International at [phone].

• In Asia, call Crestron Asia at [phone].

• In Latin America, call Crestron Latin America at [phone].

For local support from exclusive Crestron factory-trained personnel call:

• In Australia, call Soundcorp at [phone].

• In New Zealand, call Amber Technologies at [phone].

Operations & Installation Guide - DOC. 5758 Lens Mount Accessory: CPC-LMT •• 5

Return Warranty Policies

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange, or service

without prior authorization from CRESTRON. To obtain warranty
service for CRESTRON products, contact the factory and request an
RMA (Return Merchandise Authorization) number. Enclose a note
specifying the nature of the problem, name and phone number of
contact person, RMA number, and return address.

2. Products may be returned for credit, exchange, or service with a

CRESTRON Return Merchandise Authorization (RMA) number.
Authorized returns must be shipped freight prepaid to CRESTRON,
Cresskill, N.J., or its authorized subsidiaries, with RMA number clearly
marked on the outside of all cartons. Shipments arriving freight collect
or without an RMA number shall be subject to refusal. CRESTRON
reserves the right in its sole and absolute discretion to charge a 15%
restocking fee, plus shipping costs, on any products returned with an
RMA.

3. Return freight charges following repair of items under warranty shall

be paid by CRESTRON, shipping by standard ground carrier. In the
event repairs are found to be non-warranty, return freight costs shall be
paid by the purchaser.

CRESTRON Limited Warranty

CRESTRON ELECTRONICS, Inc. warrants its Cresnet II products, denoted by a
"CN" prefix model number, to be free from manufacturing defects in materials and
workmanship for a period of three (3) years from the date of shipment to purchaser.
Disk drives and any other moving or rotating mechanical parts are covered for a
period of one (1) year. CRESTRON warrants all its other products for a period of
one year from the defects mentioned above, excluding touchscreen display
components which are covered for 90 days. Incandescent lamps are completely
excluded from Crestron's Limited Warranty. CRESTRON shall, at its option, repair
or replace any product found defective without charge for parts or labor. Repaired or
replaced equipment and parts supplied under this warranty shall be covered only by
the unexpired portion of the warranty.

CRESTRON shall not be liable to honor warranty terms if the product has been used
in any application other than that for which it was intended, or if it has been
subjected to misuse, accidental damage, modification, or improper installation
procedures. Furthermore, this warranty does not cover any product that has had the
serial number altered, defaced, or removed.

This warranty shall be the sole and exclusive remedy to the purchaser. In no event
shall CRESTRON be liable for incidental or consequential damages of any kind
(property or economic damages inclusive) arising from the sale or use of this
equipment. CRESTRON makes no other warranties nor authorizes any other party to
offer any warranty, expressed or implied, including warranties of merchantability for
this product. This warranty statement supersedes all previous warranties.

Trademark Information

All brand names, product names, and trademarks are the sole property of their
respective owners. Windows is a registered trademark of Microsoft Corporation.
Windows95, Windows98 and WindowsNT are trademarks of Microsoft Corporation

6 •• Lens Mount Accessory: CPC-LMT Operations & Installation Guide - DOC. 5758