Crestron CNX-TS User Manual

Crestron CNX-TS
Single Gang Temperature Sensor
Operations & Installation Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

All brand names, product names and trademarks are the property of their respective owners.

©2002 Crestron Electronics, Inc.

Crestron CNX-TS Single Gang Temperature Sensor

Contents

Single Gang Temperature Sensor: CNX-TS 1

Introduction......................................................................................1

Features and Functions ..........................................................1

Specifications......................................................................... 2

Physical Description ..............................................................2

Industry Compliance..............................................................4

Setup.................................................................................................5

Network Wiring.....................................................................5

Identity Code .........................................................................6

Installation .............................................................................7

Programming.................................................................................... 8

Programming with SIMPL Windows....................................8

Programming with VT Pro-e ............................................... 13

Problem Solving............................................................................. 13

Troubleshooting...................................................................13

Further Inquiries ..................................................................14

Firmware Upgrades .............................................................14

Future Updates.....................................................................14

Software License Agreement......................................................... 15

Return and Warranty Policies ........................................................ 17

Merchandise Returns / Repair Service .......................17

CRESTRON Limited Warranty ...................................17

Operations & Installation Guide - DOC. 8173 Contents • i

Crestron CNX-TS Single Gang Temperature Sensor

Single Gang Temperature Sensor:
CNX-TS

Introduction

Features and Functions

The CNX-TS is a wall-mounted single gang temperature sensor that can
be part of a Crestron Home™ total control system. The temperature
sensor is a standard Cresnet device, and provides temperature sensing
when the control system is properly programmed using SIMPL™

Windows. Multiple sensors can be used in a room to give a more
accurate temperature reading.

Functional Summary

• Multiple temperature sensors for more accurate reading

• Temperature sensor reports to Cresnet for HVAC monitoring

Operations & Installation Guide - DOC. 8191 Single Gang Temperature Sensor: CNX-TS • 1

Single Gang Temperature Sensor Crestron CNX-TS

q

Specifications

The following table provides specifications for the sensors.

Specifications for the Sensors

SPECIFICATION DETAILS

Power Re

uirements

Default Network ID
Temperature Range
Control System Update Files

1, 2, 3

2-Series Control System Update Version C2-1001.CUZ or later
CEN/CN-TVAV Update File Version 5.10.13V.UPZ or later
CNMSX-AV/Pro Update File Version 5.12.63X.UPZ or later
CNRACKX/-DP Update File Version 5.10.11W.UPZ or later

ST-CP Update File Version 4.02.04S.UPZ or later

24 VDC, 0.010A, .25 Watts
53

o

32

F - 113oF (0oC - 45oC)

Dimensions and Weight Height: 4.76 in (12.1 cm)

Width: 2.91 in (5.57 cm)
Depth: 1.40 in (3.56 cm)
Weight: 2.60 oz (75 g)

1 The latest software versions can be obtained from the Downloads | Software Updates section

of the Crestron website (www.crestron.com

2. Crestron 2-Series control systems include the AV2, PAC2, PRO2, RACK2, CP2, and MP2.

3. CNX update files are required for either CNMSX-AV/Pro or CNRACKX/-DP. Filenames for
CNX update files have a UPZ extension, and ST-CP files are in one EXE or zipped UPZ file.
To avoid program problems, make sure you are using the update file with the correct suffix
letter (e.g., S, V, W, X).

4. The depth of the Sensor is listed without the Cresnet connector (approximately 0.45 in) plus
clearance for the wiring.

). Refer to the NOTE after footnote 4.

4

NOTE: Crestron software and any files on the website are for
Authorized Crestron dealers only. New users may be required to register
to obtain access to certain areas of the site (including the FTP site).

Physical Description

Refer to the illustrations on the next page. The sensor unit consists of a
Cresnet circuit board, a rear speaker, and a male port (standard Cresnet
network port labeled 24 Y Z G). The port provides operating power and
communications to/from the sensor.

2 • Single Gang Temperature Sensor: CNX-TS Operations & Installation Guide - DOC. 8191

Crestron CNX-TS Single Gang Temperature Sensor

The faceplate consists of a removable faceplate that is attached to the
sensor unit.

Temperature Sensor Physical View (with faceplate)

4.762 in*

12.096 cm

*Approximate measurements with supplied faceplate, other
faceplates may have different measurements.

Sensor Unit

Front View

2.912 in*

5.568 cm

1.067 in

2.710 cm

Side Views

1.400 in*

3.556 cm

Front View

1.788 in

4.542 cm

TOP

Back View

1.693 in

4.301 cm

Speaker

4.158 in

10.562 cm

2.710 in

6.884 cm

NET

Cresnet port

24 Y Z G

Static sensitive device, observe
electrostatic discharge (ESD) precautions.

Operations & Installation Guide - DOC. 8191 Single Gang Temperature Sensor: CNX-TS • 3

Single Gang Temperature Sensor Crestron CNX-TS

Installation View

Single gang electrical box

(2.5 in. depth recommended)

Sensor unit

Faceplate

1 in. panhead

Industry Compliance

As of the date of manufacture, the sensors have been tested and found to
comply with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling (N11785).

NOTE: This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

4 • Single Gang Temperature Sensor: CNX-TS Operations & Installation Guide - DOC. 8191