Page 1
CAPTURE-HD & CAPTURE-HD-PRO
Capture HD® High-Definition Capture Recorder
5
6
1
Included Items
The following items are included with the CAPTURE-HD and
CAPTURE-HD-PRO: (herein known as Capture recorder):
• One Multimedia Memory Card, SDHC™ (16 GB)
• One power pack: 12 volt dc Power Pack, Universal,
(removable power cord included)
quickstart guide
• One BNC to RCA adapter
• One 3-pin and two 5-pin single row interface connectors
• Two rack mount brackets
• Eight screws to attach rack mount brackets
• One 3-foot (~0.9 meter) stereo audio cable with RCA connectors
The following items are available separately:
• CAM-IFB-100, Camera for Capture HD
• CAM-IPTZ-101, PTZ Camera for Capture HD
• CAPTURE-TPMC-4SM, Touch Screen Controller for CAPTURE-HD
• CBL Series, Crestron
• CEN-FUSION-RVS-R310 Pre-configured Fusion RV
• Fusion RV (SW-FUSION-RV) Remote Asset Management Software
• MP-FS100_PAK, FreeSpeech
• MP-FS200_PAK, FreeSpeech
®
Certified Interface Cables
®
®
Server System
®
Single-Channel Wireless Mic System Package
Dual-Channel Wireless Mic System Package
Connect Speech Input
3
Connect the output of the microphone system to one of the SPEECH IN
connectors. (The RCA jack provides for unbalanced input; the 3-pin
connector provides for balanced input. Use only one input at a time.)
Crestron recommends using the FreeSpeech wireless mic system. To do
so, simply connect an RCA cable from the white LINE OUT connector on
the rear of the FreeSpeech receiver to the white unbalanced input
connector on the Capture recorder.
Unbalanced
Input
4
Connect Camera
Connect the camera using the CAMERA IN COMPOSITE or 3G-SDI input.
(The 3G-SDI input is available only on the CAPTURE-HD-PRO.)
A BNC to RCA adaptor is included for use with the COMPOSITE input, if
needed.
Balanced
Input
MP-FS-RX1 FreeSpeech System
Connect Content Source
Connect the content source (typically a PC or laptop) to one of the CONTENT IN
inputs on the Capture recorder. Both HDMI and RGBHV (VGA) are provided.
®
The Capture recorder is pre-configured to automatically select the HDMI
if present, otherwise it selects the RGBHV source.
source,
Connect Output
Connect the output. The LOOP OUT RGBHV port can be used to route the content
from the RGBHV input directly to a display or projector, allowing the Capture
recorder to fit into an existing system seamlessly.
Projector
Typical Image on RGBHV or HDMI Output
Content
Only
Typical PIP Image on HDMI Output
CAPTURE-HD & CAPTURE-HD-PRO
1
2
Initial Hookup
1. Insert the included SDHC card into the MEMORY slot, contacts facing
down.
2. If the installation requires connection to a network, plug a network cable
into the LAN port.
3. Connect the G (ground) terminal to earth ground.
4. Connect the supplied power supply to the 12V 5.0A port.
NOTE: Do not apply power at this time.
Memory
Card LAN
DC
Power Ground
For details, refer to the CAPTURE-HD & CAPTURE-HD-PRO
Operations Guide, Doc. 7233.
QUICKSTART DOC. 7234E (2031322) 07.13
CAPTURE-HD-PRO Only
The Capture recorder is pre-configured to select the 3G-SDI source, if
present, otherwise it selects the COMPOSITE input.
Crestron recommends the following two Crestron composite cameras:
CAM-IFB-100
(Sony model SNC-CH110)
www.crestron.com
Specifications subject to
change without notice.
* The camera is supplied with an 8” (203 mm)
3.5 mm monaural to female BNC adapter cable.
CAM-IPTZ-101
(Canon model VB-C300)*
888.273.7876 201.767.3400
The HDMI OUT port can also be used to display
the selected content input source.
It can also be configured to act as a “confidence
monitor” showing exactly what is being recorded.
Connect Power
7
Plug the power supply line cord into a standard 110 -120 Vac power source. The
Capture recorder goes through an initialization sequence that takes approximately
90 seconds. When the initialization process is complete, the front panel display is
similar to the following:
Press REC when ready
2013-03-13 16:25
No meetings
Content
Camera
Page 2
CAPTURE-HD & CAPTURE-HD-PRO
Capture HD® High-Definition Capture Recorder
Operation Overview
8
The Capture recorder has two options for storage: local storage and storage on a remote server.
● Local Storage
For local storage, the device records a presentation either on the provided SDHC card or on
a USB storage device inserted in the front or rear USB port. (Either storage device must be
formatted for FAT32.) Before starting, the front panel controls are used to specify where the
file is to be saved (the default is the SDHC card).
When the presentation is about to begin, the presenter simply presses the REC button;
when finished, presses STOP; and the video file (example: CAPTURE-HD61ecf4_2011-1017_09_43_29.ts) is saved in the specified location. After the front panel indicates that the
recording is done, the media can be removed, if desired, and made available for other
presentations.
● Storing on Remote Server
quickstart guide
The presentation can also be saved to local media, and then uploaded via FTP to a remote
server. Distribution is then controlled by FTP settings from the SIMPL Windows symbol, the
optional CAPTURE-TPMC-4SM touch screen, or Fusion RV.
When the Capture recorder is used in conjunction with Fusion RV, the presentation is
automatically transferred via FTP to a “Watch” directory that Fusion RV monitors. When
Fusion RV detects the new file, it takes the file and processes it for distribution.
Typical Hookup Arrangement
10
Content Audio
Laptop
Content
Projector
CAPTURE-HD & CAPTURE-HD-PRO
12 Vdc
Basic Configuration for Local Storage
9
From the initial display shown in Section 7 , use the buttons adjacent to the left, right, up, and
down arrow
button accepts the displayed menu option or value; the HOME button returns the display to the
initial display, shown below; the BACK button always returns the display to the previous screen.
For example, to use a USB storage device instead of the default supplied SDHC card, install a
USB device (which must be formatted for FAT32, with a minimum storage capacity of 4 GB)
into the front USB port, and perform the following steps:
Initial Display
Press REC when ready
“Installer Mode” Menu
Installer Mode
symbols on the front panel to navigate the various menus and options. The SELECT
1. From the initial display, press the BACK button to display the
“Installer Mode” menu, then continue navigating to the “Default
Location” menu as illustrated below.
No meengs
Audio
Video
Network
Control
2. Press the down button to move down to USB Front and press the
SELECT button to select that drive as the preferred storage location.
The screen returns to the “Storage” menu. Move down to Space Left
and press SELECT. The screen displays the “Space Left” menu.
Move to USB Front and press SELECT again. The screen displays
“Front Space Left” and shows the amount of space available
(depicted by ‘nnnn’), in megabytes.
Control
Restore Defaults
About
Storage
Upload
Storage
Default Locaon
Space Le
Space Le
USB Front
USB Back
MMC
Default Locaon
Front Space Le
nnnn MegaBytes
MMC
USB Front
USB Back
FreeSpeech
MP-FS-RX1
* The CAM-IPTZ-101 (Canon model VB-C300) is also available for composite input.
Ethernet Setup
11
Establish Ethernet communication between the devices in the CaptureLiveHD™ system as follows:
1. Using the CAPTURE-TPMC-4SM “Ethernet Setup” screens, select Control System Settings and enter the IP address
(or hostname) of the CAPTURE-HD or CAPTURE-HD-PRO device. The Capture recorder’s IP address can be found from
its front panel display by entering the Network menu, then the Status menu. Enter 03 as the CIP ID.
2. After entering the Capture recorder’s IP address and CIP ID, exit the setup screens (touch Back twice to return to the
“Panel Setup Options” menu, touch Save & Exit). The panel goes through an initialization process and displays a “Start”
screen, ready to record a new presentation session.
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, Capture HD, CaptureLive HD, FreeSpeech and Fusion RV are either trademarks or registered trademarks of Crestron Electronics,
Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United
States and/or other countries. SD and SDHC are either trademarks or registered trademarks of SD-3C, LLC in the United States and/or other countries. Other
trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Crestron disclaims proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2013 Crestron Electronics, Inc.
CAM-IFB-100
(Sony model SNC-CH110)*
CAPTURE-TPMC-4SM
CEN-SW-POE-5
48 Vdc
Power Supply
100-240 Vac
100-240 Vac
12 Vdc
Power
Supply
2
For details, refer to the CAPTURE-HD & CAPTURE-HD-PRO
Operations Guide, Doc. 7233.
QUICKSTART DOC. 7234E (2031322) 07.13
www.crestron.com
Specifications subject to
change without notice.
888.273.7876 201.767.3400
Loading...