Crestron CAEN-UMP User Manual
CAEN-UMP – Universal Mounting Plates
Introduction
Crestron Universal Mounting Plates (CAEN-UMP Series)
are a complete line of accessory plates, which allow
mounting of non-Crestron equipment to any Crestron
Automation Enclosure (CAEN-Series). Third-party
products such as phone and alarm systems can be
mounted to these plates within an enclosure. The
advantage to using the CAEN-UMP is that a variety of
sizes are available and each plate occupies the same area
as one, two or four Crestron lighting modules (CLXSeries). The size corresponds to the number of module
spaces and their arrangement within the enclosure. For
example, CAEN-UMP2x2 occupies four module positions
and CAEN-UMP1x1 occupies one module position. The
others (CAEN-UMP2x1 and 1x2) occupy two module
positions. Refer to the illustration on this page for an
example of plate location and orientation within a doublewide enclosure. The table beneath the illustration lists the
dimensions and weight for each CAEN-UMP model.
Installation
The CAEN-UMP must be mounted in accordance with all
national and local codes.
Example of CAEN-UMP Location and Orientation
1x1 1x1
1x2
2x1 2x1
NOTE: Adhere to Class 1 versus Class 2 wiring
requirements when considering the equipment
attached to the CAEN-UMPs in an enclosure.
NOTE: Third-party equipment attached to a
CAEN-UMP within a Crestron Automated Enclosure
should not be considered part of the Crestron system.
Use the four screws (8Bx1/4”, supplied) to attach a
CAEN-UMP to an enclosure. Crestron recommends that
the keyholes on the plates be located toward the outer
edges of the enclosure as shown in the drawing on this
page. As a result, the flanges of the plates do not overlap
each other when positioning any combination of CAENUMP2x1s, CAEN-UMP1x1s, or lighting modules sideby-side in an enclosure.
Further Inquiries
If after reviewing this guide, you cannot locate specific
information or have questions, please take advantage of
Crestron's award winning customer service team. Call:
• In the US and Canada, call Crestron’s corporate
headquarters at 1-888-CRESTRON
[1-888-273-7876] or 1-201-767-3400.
2x2
Universal Mounting Plate Dimensions & Weight
CAEN-UMP 2x2 2x1 1x2 1x1
1
15
Height
Width
Depth
Weight
Dimensions are provided in inches, edge to edge.
Weight is provided in ounces.
/
8
14 6
5
/
8
22 .6 12 .0 12 .4 6 .6
15
1
/
8
15
/
16
5
/
8
7
7
/
16
14 6
5
/
8
7
7
/
16
15
/
16
5
/
8
Crestron Electronics, Inc. Installation Guide – DOC. 5981
15 Volvo Drive Rockleigh, NJ 07647 07.02
Tel: 888.CRESTRON
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange, or service without prior
authorization from CRESTRON. To obtain warranty service for CRESTRON
products, contact the factory and request an RMA (Return Merchandise
Authorization) number. Enclose a note specifying the nature of the problem,
name and phone number of contact person, RMA number, and return address.
2. Products may be returned for credit, exchange, or service with a CRESTRON
Return Merchandise Authorization (RMA) number. Authorized returns must be
shipped freight prepaid to CRESTRON, Cresskill, N.J., or its authorized
subsidiaries, with RMA number clearly marked on the outside of all cartons.
Shipments arriving freight collect or without an RMA number shall be subject to
refusal. CRESTRON reserves the right in its sole and absolute discretion to
charge a 15% restocking fee, plus shipping costs, on any products returned with
an RMA.
3. Return freight charges following repair of items under warranty shall be paid by
CRESTRON, shipping by standard ground carrier. In the event repairs are found
to be non-warranty, return freight costs shall be paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from
manufacturing defects in materials and workmanship under normal use for a period
of three (3) years from the date of purchase from CRESTRON, with the following
exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt
heads and power supplies are covered for a period of one (1) year; touchscreen
display and overlay components are covered for 90 days; batteries and incandescent
lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an
authorized CRESTRON dealer. Purchasers should inquire of the dealer regarding the
nature and extent of the dealer's warranty, if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has
been used in any application other than that for which it was intended, or if it has
been subjected to misuse, accidental damage, modification, or improper installation
procedures. Furthermore, this warranty does not cover any product that has had the
serial number altered, defaced, or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no
event shall CRESTRON be liable for incidental or consequential damages of any
kind (property or economic damages inclusive) arising from the sale or use of this
equipment. CRESTRON is not liable for any claim made by a third party or made by
the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective,
without charge for parts or labor. Repaired or replaced equipment and parts supplied
under this warranty shall be covered only by the unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other
warranties, expressed or implied, nor authorizes any other party to offer any
warranty, including any implied warranties of merchantability or fitness for a
particular purpose. Any implied warranties that may be imposed by law are limited
to the terms of this limited warranty. This warranty statement supercedes all previous
warranties.
Trademark Information
All brand names, product names, and trademarks are the sole property of their respective owners.
Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP and
WindowsNT/2000 are trademarks of Microsoft Corporation.
Loading...