The CAEN Series automation enclosures are designed to house Crestron’s
CLX-Series lighting control modules and PAC2 or PAC2M control systems. CAEN
enclosures are available in an assortment of sizes, suitable for surface or flush wall
mount installation. Each model has been engineered to provide a clean and
manageable installation with abundant provisions for wire termination and
electrical knockouts.
CAEN automation enclosures are designed to use space efficiently supporting over
a hundred possible circuits in the largest model. Both centralized and distributed
configurations are possible. A single PAC2 control system installed in a central
enclosure can support numerous satellite extension enclosures distributed
throughout a residence or commercial facility. Interconnection of the complete
network of enclosures requires just one circulating Cresnet cable. Dozens of
keypads, touchpanels, wall box dimmers, shade controllers, and other peripherals
can also be terminated within an enclosure, with separate compartments provided
for high and low voltage wiring.
Crestron lighting and automation systems are completely convection cooled for
silent and reliable operation. A vented front cover is included with every enclosure.
All models are constructed of 16-gauge galvanized steel and are pre-drilled for
mounting of the PAC2, PAC2M, CLX modules, CLT terminal blocks, power supplies,
and CAEN-BLOCK terminal block. Additional non-CLX lighting modules and thirdparty contactors may be installed using Crestron’s CAEN-UMP universal mounting
plates. Grounding blocks and low-voltage partitions are included.
CAEN enclosures are also well suited for all types of Class 2 and Class 3
applications including voice and data structured wiring, security, and RF signal
distribution (as permitted by applicable codes).
CAEN enclosures are UL and C-UL listed. If you require a complete UL Listed
panel, Crestron offers this service through its UL Listed panel shop, providing
complete in-factory system configuration and assembly.
> Enclosures for CLX-Series lighting control modules and
PAC2/PAC2M automation control systems
> Available in five convenient sizes
> Surface or flush wall mountable
> Enable over 100 dimmer controlled circuits per enclosure
> Supports centralized and distributed system configurations
> Residential and commercial applications
> Quiet, reliable, and efficient convection cooling
> Includes galvanized steel backbox with grounding blocks, low-
voltage partitions, and vented front cover
> Additional mounting and termination accessories available
> For 120 and 230 Volt systems
> Also useful for non-lighting applications such as voice and data
structured wiring, security, and RF signal distribution
> UL Listed panel shop fabrication service available
AVAILABLE MODELS
CAEN-7X2 7 modules high x 2 modules wide
CAEN-7X1 7 modules high x 1 modules wide
CAEN-4X2 4 modules high x 2 modules wide
CAEN-4X1 4 modules high x 1 modules wide
CAEN-2X1 2 modules high x 1 modules wide
SPECIFICATIONS
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
16 Gauge galvanized steel backbox with perforated grey steel cover, surface or flush wall
mount
Dimensions (including cover)
CAEN-7X2: Height: 62.75 in (159.39 cm)
Width: 27.25 in (69.22 cm)
Depth: 4.32 in (10.98 cm)
CAEN-7X1: Height: 62.75 in (159.39 cm)
Width: 16.10 in (40.90 cm)
Depth: 4.32 in (10.98 cm)
CAEN-4X2: Height: 39.65 in (100.72 cm)
Width: 27.25 in (69.22 cm)
Depth: 4.32 in (10.98 cm)
CAEN-4X1: Height: 39.65 in (100.72 cm)
Width: 16.10 in (40.90 cm)
Depth: 4.32 in (10.98 cm)
CAEN-2X1: Height: 24.25 in (61.60 cm)
Width: 16.10 in (40.90 cm)
Depth: 4.32 in (10.98 cm)
Weight
CAEN-7X2: 65.0 lb (29.48 kg)
CAEN-7X1: 42.0 lb (19.05 kg)
CAEN-4X2: 43.0 lb (19.50 kg)
CAEN-4X1: 28.0 lb (12.70 kg)
CAEN-2X1: 19.0 lb (8.62 kg)
www.crestron.com |800.237.2041
Crestron CAEN Series
Automation Enclosures
CAEN-7X2 loaded without cover
CAEN-7X2 with cover
CLX and CLXI Series
Lighting Control Modules
CLT and CLTI Series
Terminal Blocks
PAC2
Automation Control System
PAC2M
Mini Automation Control System
CLX-PWS75
Cresnet Power Supply Module
CAEN-UMP Series
Universal Mounting Plates
CAEN-CK Series
Cover Extension Kits
CAEN-BLOCK
Cresnet Terminal Block
C2N-SPWS300
300 Watt Cresnet Power Supply
C2N-NPA8
Cresnet Network Poll Accelerator
Crestron Electronics, Inc.
15 Volvo DrivelRockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400lFax: 201.767.1903
www.crestron.com
Specifications subject to change without notice. Doc.6106A 12/07
All brand names, product names and trademarks are the property of their respective owners.
©2007 Crestron Electronics, Inc.
Crestron CAEN Series Automation Enclosures
Top View – without Cover
CAEN-2X1/4X1/7X1
Typical Application
14.38 in
(36.5 cm)
Front View – without Cover
CAEN-4X2 shown with (1) PAC2 and
(3) lighting control modules installed
27.25 in
(69.2 cm)
†
39.65 in
(100.7 cm)
‡
Right Side View – without Cover
CAEN-2X1 (left), CAEN-4X1/4X2 (center),
CAEN-7X1/7X2 (right)
Ground Block
CLT or CLTI-Series
Terminal Block*
15.38 in
(39.0 cm)
25.50 in
(64.7 cm)
26.50 in
(67.3 cm)
4.13 in
(10.4 cm)
38.88 in
(98.7 cm)
4.13 in
(10.4 cm)
23.50 in
(59.6 cm)
4.13 in
(10.4 cm)
62.00 in
(157.5 cm)
Top View – without Cover
CAEN-4X2
Top View – without Cover
CAEN-7X2
CLX or CLXI-Series
Lighting Control Module*
(1) module space, unoccupied
Available spaces per enclosure:
CAEN-2X1: 2 spaces
CAEN-4X1: 4 spaces
CAEN-4X2: 8 spaces
CAEN-7X1: 7 spaces
CAEN-7X2: 14 spaces
PAC2 Automation
Control System*
CAEN-BLOCK* (Used only in
lieu of a PAC2 or PAC2M)
Low-voltage
Partition
* Sold separately.
†
CAEN-2X1/4X1/7X1 = 16.10 in (40.90 cm)
CAEN-4X2/7X2 = 27.25 in (69.22 cm)
‡
CAEN-2X1 = 24.25 in (61.60 cm)
CAEN-4X1/4X2 = 39.65 in (100.72 cm)
CAEN-7X1/7X2 = 62.75 in (159.39 cm)
Front View – with Cover
CAEN-4X2 shown
RELATED PRODUCTS
Loading...