Color-matched almond, black, and white smooth finishes
l
Versatile combinations of 2 to 8 pushbuttons
l
Installer-configurable with choice of 4 button sizes
l
Split buttons for up/down and on/off functions
l
Button events enable tap, double-tap, and hold functionality
l
Customizable button engraving
l
Green LED feedback indicators
l
Built-in LED flashing and bargraph logic
l
Adjustable LED intensity
l
Quick and easy installation
l
Cresnet® wired communications
Through programming, each button can be configured for up to
three separate functions. In addition, shift key functionality is
possible, allowing any button to be held while pressing another
to provide further customization for the keypad.
Enhanced LED Feedback
Six pinhead-sized green LEDs provide fully customizable
feedback to show the status of each button. Ten flash patterns
are built in, enabling flashing LED feedback with simplified
programming and reduced traffic on the Cresnet® network.
Onboard bar graph logic allows the feedback LEDs to function
as a 6-segment bar graph display, providing clear level
indication when adjusting lighting and audio settings.
Cresnet® Wired Communications
The Cresnet bus is the communications backbone for many
Crestron keypads, lighting controllers, shade motors, sensors,
and other devices. Cresnet is a simple, yet flexible 4-wire
network that provides bidirectional communication and 24 VDC
power for Cresnet devices. Cresnet supports up to 252 keypads
and other devices.
The Cameo® Express Standard Mount Keypad (C2N-CBD-E)
from Crestron® presents a very cost-effective keypad solution,
featuring a highly configurable one-gang wall mount form
factor. The C2N-CBD-E easily installs alongside other lowvoltage in-wall devices to deliver a fully customizable keypad
control solution as part of a complete Crestron control system.
Customizable Buttons
Simple yet highly customizable, a single Cameo Express Keypad
can be configured easily by the installer to provide from two to
eight buttons. Each keypad is furnished with an assortment of
button caps in four different sizes to support a variety of
physical layouts. Button caps may also be ordered with custom
laser engraving1to clearly designate each button's function.
Standard Wall Mount
Cameo Express Standard Mount Keypads are designed for
installation in a standard electrical wall box, making them
perfect for installation in a multi-gang box alongside other lowvoltage devices. Available in a selection of three colors with
smooth finishes, Cameo Express Keypads match popular offthe-shelf decorator-style faceplates.
C2N-CBD-E
Cameo®Express Keypad, Standard Mount
Specifications
Buttons
KeypadButtons Configurable for 2 to 8 single-action
pushbuttons
ButtonEventsProgrammable for Normal, Tap, Double-Tap,
and Press and Hold
Button CapsIncludes (2) large, (3) medium, (5) small, and
(2 pair) split small button caps;
All button caps are blank;
Custom-engraved, backlit button caps are
available separately
FP-G1-B-S
Decorator Style Faceplate, 1-Gang, Black Smooth
FP-G1-W-S
Decorator Style Faceplate, 1-Gang, White Smooth
This produ ct may be purchased from s elect au thorized Crestron dealers an d
distributors . To find a dealer or distributor, please contact the Crestron sales
representative for your area. A list of sales representatives is available online at
www.crestron.com/How-T o-B uy/ Find-a-Representative or by calling
855-263-8754.
This produ ct is covered under the Crestron standard limited warranty. Refer to
www.crestron.com/warranty for full details.
The specific patents that cover Crestron produ cts are listed online at
patents.crestron .com.
Certain Crestron pro ducts contain open source software. For specific
information, please visit www.crestron.com/opensource.
Crestron, the Crestron logo, Cameo, and Cresn et are either trademarks or
registered trademarks of Crestron Electronics, Inc. in the United States and/or
other countries. Other trademarks, registered trademarks, and trade names
may be used in this docu ment to refer to either the entities claiming the marks
and names or their products. Crestron disclaims any proprietary interest in the
marks and names of others. Crestron is n ot respons ible for errors in
typography or pho tography.
Specifications are subject to ch ange without no tice.