Crestron C2N-CAMI-CMT User Manual

Ceiling Mount for C2N-CAMIDSPT: C2N-CAMI-CMT

Description

The C2N-CAMI-CMT is a black ceiling mount accessory for the Crestron® C2N-CAMIDSPT
Camera Interface, Digital Servo Pan Tilt Head. The Ceiling Mount easily attaches to any secure
horizontal surface, and provides sufficient clearance for most of today’s camera/lens assemblies.
The Ceiling Mount is constructed of steel, has an overall length of 8.0 inches (20.32 cm), and a
maximum load rating of 40 pounds (88 kg).

Installation consists of attaching the Ceiling Mount (ceiling mounting hardware not supplied) to a
suitable location that will support the combined weight of the Ceiling Mount, the C2N-CAMIDSPT,
and the camera/lens assembly; attaching the C2N-CAMIDSPT to the Ceiling Mount, using four
1/4x20x1/2 inch screws supplied; and then mounting the camera/lens assembly. (Refer to the
illustration below.)

3.5 in (8.89 cm)
Diameter

C2N-CAMIDSPT

Four Thru Holes

0.265 in (0.67 cm)

Further Inquiries

If after reviewing this sheet, you cannot locate specific information or have questions, please take
advantage of Crestron's award winning customer service team by calling:

• In the US and Canada, call Crestron’s corporate headquarters at
1-888-CRESTRON [1-888-273-7876].

MOUNT

8.0 in

(20.32 cm)

5.0 in (12.70 cm)
Diameter

CEILING

MOUNT

Four Thru Holes

0.265 in (0.67 cm)

on 4.0 in (10.16 cm)

Bolt Hole Circle

• In Europe, call Crestron International at [phone].

• In Asia, call Crestron Asia at [phone].

• In Latin America, call Crestron Latin America at [phone].

• In Australia and New Zealand, call Crestron Pacific at [phone].

You can also log onto the online help section of the Crestron website (www.crestron.com) to ask
questions about Crestron products. First-time users will need to establish a user account to fully
benefit from all available features.

Crestron Electronics, Inc. Data Sheet – DOC. 6274

15 Volvo Drive Ceiling Mount for C2N-CAMIDSPT: C2N-CAMI-CMT
Rockleigh, NJ 07647 07.04
Tel: 888.CRESTRON Specifications subject to change without notice.
Fax: [phone] www.crestron.com

Return and Warranty Policies

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange, or service without
prior authorization from CRESTRON. To obtain warranty service for
CRESTRON products, contact the factory and request an RMA (Return
Merchandise Authorization) number. Enclose a note specifying the nature of
the problem, name and phone number of contact person, RMA number, and
return address.

2. Products may be returned for credit, exchange, or service with a
CRESTRON Return Merchandise Authorization (RMA) number. Authorized
returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive,
Rockleigh, N.J., or its authorized subsidiaries, with RMA number clearly
marked on the outside of all cartons. Shipments arriving freight collect or
without an RMA number shall be subject to refusal. CRESTRON reserves
the right in its sole and absolute discretion to charge a 15% restocking fee,
plus shipping costs, on any products returned with an RMA.

3. Return freight charges following repair of items under warranty shall be paid
by CRESTRON, shipping by standard ground carrier. In the event repairs are
found to be non-warranty, return freight costs shall be paid by the purchaser.

CRESTRON Limited Warranty

CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing
defects in materials and workmanship under normal use for a period of three (3) years
from the date of purchase from CRESTRON, with the following exceptions: disk drives
and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are
covered for a period of one (1) year; touchscreen display and overlay components are
covered for 90 days; batteries and incandescent lamps are not covered.

This warranty extends to products purchased directly from CRESTRON or an authorized
CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and
extent of the dealer's warranty, if any.

CRESTRON shall not be liable to honor the terms of this warranty if the product has been
used in any application other than that for which it was intended, or if it has been
subjected to misuse, accidental damage, modification, or improper installation
procedures. Furthermore, this warranty does not cover any product that has had the
serial number altered, defaced, or removed.

This warranty shall be the sole and exclusive remedy to the original purchaser. In no
event shall CRESTRON be liable for incidental or consequential damages of any kind
(property or economic damages inclusive) arising from the sale or use of this equipment.
CRESTRON is not liable for any claim made by a third party or made by the purchaser
for a third party.

CRESTRON shall, at its option, repair or replace any product found defective, without
charge for parts or labor. Repaired or replaced equipment and parts supplied under this
warranty shall be covered only by the unexpired portion of the warranty.

Except as expressly set forth in this warranty, CRESTRON makes no other warranties,
expressed or implied, nor authorizes any other party to offer any warranty, including any
implied warranties of merchantability or fitness for a particular purpose. Any implied
warranties that may be imposed by law are limited to the terms of this limited warranty.
This warranty statement supercedes all previous warranties.

Trademark Information

All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a
registered trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of
Microsoft Corporation.