Crestron BB-6L
Crestron BB-6L
Wall Mount Back Box
Wall Mount Back Box
Installation Guide
Installation Guide
Crestron BB-6L Wall Mount Back Box
Contents
Wall Mount Back Box: BB-6L 1
Description.................................................................................................................................1
Installation .................................................................................................................................4
Assembly.....................................................................................................................4
Mounting ..................................................................................................................... 4
Other Mounting Option Accessories ........................................................................... 6
Contact Information and Updates..............................................................................................7
Further Inquiries..........................................................................................................7
Future Updates ............................................................................................................7
Return and Warranty Policies....................................................................................................8
Merchandise Returns / Repair Service ........................................................................8
CRESTRON Limited Warranty...................................................................................8
Installation Guide - DOC. 6551B Contents • i
Crestron BB-6L Wall Mount Back Box
Wall Mount Back Box: BB-6L
Description
The BB-6L is a UL®-listed pre-construction mounting option for the Crestron Isys®
TPS-6L wall mounted touchpanel. It is designed to be installed before the drywall is
put up. The table below lists all parts included with the BB-6L.
Supplied Components
DESCRIPTION PART NUMBER QTY
Back Box Mounting Enclosure Assembly 4503684 1
Cover Plate 2016977 1
Screw, 04-40, 2” L, pan head phillips 2018793 4
Screw, 08-8B, 1/4” L, pan head phillips, self-tapping 2007277 1
The mounted view of the BB-6L is shown in the following diagram.
BB-6L Mounted View (Optional Cover Plate Attached)
Installation Guide - DOC. 6551B Wall Mount Back Box: BB-6L • 1
Wall Mount Back Box Crestron BB-6L
The dimensions of the BB-6L are shown in the following diagrams.
Dimensional Drawing (Fully Assembled without Cover Plate)
9.57 in
(24.31 cm)
6.50 in
(16.51 cm)
6.82 in
(17.32 cm)
6.99 in
(17.78 cm)
4 30/32 in
(126 mm)
4 25/32 in
(121 mm)
4 12/32 in
(111 mm)
6 21/32 in
(170 mm)
6 9/32 in
(159 mm)
16/32 in
(13 mm)
4.60 in
(11.68 cm)
5 13/32 in
(138 mm)
0.06 in
(0.16 cm)
3.31 in
(8.41 cm)
1.50 in
(3.81 cm)
8.07 in
(20.50 cm)
NOTE: Knock-out holes are intended for Class 2 wiring only and are ½” and ¾”
diameter.
• Wall Mount Back Box: BB-6L Installation Guide - DOC. 6551B
2
Crestron BB-6L Wall Mount Back Box
Dimensional Drawing (Cover Plate)
7.36 in
(18.70 cm)
5.46 in
(13.87 cm)
0.03 in
(0.08 cm)
Installation Guide - DOC. 6551B Wall Mount Back Box: BB-6L
• 3
Wall Mount Back Box Crestron BB-6L
Installation
Assembly
Required Tools:
• #2 Phillips tip screwdriver
The back box mounting enclosure assembly comes fully assembled except for a
grounding screw. Complete the following procedure in the order provided.
1. Remove knockouts as required.
2. Attach the supplied #08-8B self-tapping screw to back box mounting
enclosure assembly for grounding.
NOTE: #08-8B self-tapping screw (2007277), supplied for grounding purposes, is
installed in the rear of the back box mounting enclosure assembly.
Mounting
Required Tools:
• #2 Phillips tip screwdriver or hammer
• Level
NOTE: If your installation is not on wooden studs, be sure to consider the needs of
your particular situation. For example, screw type may vary for steel studs, etc.
Complete the following procedure (refer to illustrations on the next page) to mount
the back box.
1. Position the back box against the stud so that the extended edge of the
attached mounting plate covers the front edge of the stud. Be sure that the
side of the back box is also against the side of the stud.
2. Use the level and verify that the back box is horizontal. Leveling must be
done before proceeding.
3. Attach the back box to the left or right side of the stud with standard
drywall screws or nails (not included). If mounting to the left side of a stud,
the back box must be turned over so that the extended edge of the attached
mounting plate is on the right side.
4. Feed cables through knockout holes.
NOTE: This assembly should use Class 2 wiring only.
• Wall Mount Back Box: BB-6L Installation Guide - DOC. 6551B
4
Crestron BB-6L Wall Mount Back Box
Mounting the Back Box
ENSURE THAT THESE
SURFACES ARE FLUSH.
BACK BOX MOUNTING
ENCLOSURE ASSEMBLY
(4503684).
NOTE: LABELS INDICATE
THE EDGE ALONG WHICH
DRYWALL SHOULD BE CUT.
ENSURE THAT THE
BACK BOX IS LEVEL
Mounted View with Cover Plate (Mounting Example Prior to Drywall Installation)
NOTE: BACK BOX IS TO BE COVERED WITH
DRYWALL AND THEN CUTOUT MADE
AROUND INSIDE OF OPENING.
EXPOSE THE FOUR TAPPED HOLES.
.
COVER PLATE (2016977) USED TO
#04-40 X 2 PAN
HEAD SCREW
(2018793) QTY 4
COVER CUTOUT WHEN TOUCHPANEL
NOT INSTALLED (MAY BE REQUIRED
BY LOCAL BUILDING CODES).
Installation Guide - DOC. 6551B Wall Mount Back Box: BB-6L
•
5
Wall Mount Back Box Crestron BB-6L
CAUTION: Allow an air gap of at least 12 inches in the wall cavity above and
below the touchpanel for heat dissipation.
NOTE: Cut the drywall along the inside edge of the front of the back box as. The
labels on the front of the back box indicate the perimeter of the opening that should
be cutout. Refer to the NOTE in “Mounting the Back Box” shown on the previous
page.
NOTE: The four tapped holes on the front of the back box must be exposed to
accept the touchpanel mounting screws. These holes are found beneath the drywall
just outside the four corners of the opening made by cutting out the drywall. Refer to
the NOTE in “Mounted View with Cover Plate” shown on the previous page.
5. Complete the installation by either installing the touchpanel, leaving the
hole open (if permitted by local building codes), or installing the optional
cover plate with the included #04-40 x 2” screws. If the touchpanel is to be
installed, refer to the latest revision of the TPS-6L Operations Guide (Doc.
6564) for installation instructions (www.crestron.com/manuals). Refer also
to the following comprehensive illustration.
Touchpanel Mounting – Exploded View
BACK BOX
DRYWALL
TOUCHPANEL MOUNTING
SCREWS (4)
(SUPPLIED WITH PANEL)
TPS-6L
Other Mounting Option Accessories
If too much of the mounting plate is exposed after the drywall is cut, you may need
to patch the area. Crestron provides the following accessories:
• MMK-6L (Doc. 6553) - for larger repairs and to fill in larger irregularities
around the opening (requires plastering).
• TMK-6L (Doc. 6554) - for smaller repairs and to provide a smooth edge at
the opening. This option provides a finished appearance and is preferred
when wallpaper is hung.
The manuals for the MMK-6L and TMK-6L are available from the Crestron website.
• Wall Mount Back Box: BB-6L Installation Guide - DOC. 6551B
6
Crestron BB-6L Wall Mount Back Box
Contact Information and Updates
Further Inquiries
If you cannot locate specific information or have questions after reviewing this
guide, please take advantage of Crestron's award winning customer service team by
calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
For assistance in your local time zone, refer to the Crestron website
(www.crestron.com/offices) for a listing of Crestron worldwide offices.
You can also log onto the online help section of the Crestron website
(www.crestron.com/onlinehelp) to ask questions about Crestron products. First-time
users will need to establish a user account to fully benefit from all available features.
This product is Listed to applicable UL Standards and requirements by Underwriters
Laboratories Inc.
(E227280)
As of the date of manufacture, the BB-6L has been tested and found to comply with
specifications for CE marking and standards per EMC and Radiocommunications
Compliance Labelling.
Future Updates
As Crestron adds improvements to the BB-6L, additional information may be made
available as manual updates. These updates are solely electronic and serve as
intermediary supplements prior to the release of a complete technical documentation
revision.
Check the Crestron website periodically for manual update availability and its
relevance. Updates are identified as an “Addendum” in the Download column.
Reference Documents
The latest version of all documents mentioned within the guide can be obtained from
the Crestron website (http://www.crestron.com/manuals). This link will provide a list
of product manuals arranged in alphabetical order by model number.
List of Related Reference Documents
DOCUMENT TITLE
TPS-6L Isys® 5.7" Wall Mount Touchpanel
MMK-6L Mud Ring
TMK-6L Trim Ring
Installation Guide - DOC. 6551B Wall Mount Back Box: BB-6L
• 7
Wall Mount Back Box Crestron BB-6L
Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange or service without prior authorization
from CRESTRON. To obtain warranty service for CRESTRON products, contact an
authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory
and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying
the nature of the problem, name and phone number of contact person, RMA number and
return address.
2. Products may be returned for credit, exchange or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight
prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with
RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect
or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its
sole and absolute discretion to charge a 15% restocking fee plus shipping costs on any
products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be paid by CRESTRON,
shipping by standard ground carrier. In the event repairs are found to be non-warranty, return
freight costs shall be paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials
and workmanship under normal use for a period of three (3) years from the date of purchase from
CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical
parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and
overlay components are covered for 90 days; batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON
dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if
any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended or if it has been subjected to misuse, accidental
damage, modification or improper installation procedures. Furthermore, this warranty does not cover any
product that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic damages
inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim made by a
third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or
labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the
unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or
implied, nor authorizes any other party to offer any warranty, including any implied warranties of
merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law are
limited to the terms of this limited warranty. This warranty statement supersedes all previous warranties.
Trademark Information
All brand names, product names and trademarks are the sole property of their respective owners. Windows is a registered trademark
of Microsoft Corporation. Windows95/98/Me/XP/Vista and WindowsNT/2000 are trademarks of Microsoft Corporation.
• Wall Mount Back Box: BB-6L Installation Guide - DOC. 6551B
8
Crestron BB-6L Wall Mount Back Box
This page is intentionally left blank.
Installation Guide - DOC. 6551B Wall Mount Back Box: BB-6L
• 9
Crestron Electronics, Inc. Installation Guide – DOC. 6551B
15 Volvo Drive Rockleigh, NJ 07647 (2016982)
Tel: 888.CRESTRON 10.07
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Loading...