Crestron BB-15L
Wall Mount Back Box
Installation Guide
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2005 Crestron Electronics, Inc.
Crestron BB-15L Wall Mount Back Box
Contents
Wall Mount Back Box: BB-15L 1
Description.................................................................................................................................1
Installation .................................................................................................................................3
Assembly..................................................................................................................... 3
Mounting .....................................................................................................................4
Other Mounting Option Accessories ........................................................................... 6
Further Inquiries ........................................................................................................................6
Future Updates........................................................................................................................... 6
Return and Warranty Policies....................................................................................................7
Merchandise Returns / Repair Service ........................................................................7
CRESTRON Limited Warranty...................................................................................7
Installation Guide - DOC. 6362A Contents • i
Crestron BB-15L Wall Mount Back Box
Wall Mount Back Box: BB-15L
Description
The BB-15L is a UL®-listed pre-construction mounting option for the Crestron Isys®
TPS-15L and TPS-15G-L wall mounted touchpanels. The BB-15L can also be used
with the Isys i/O™ TPMC-15-CH-L and TPMC-15-QM-L wall mounted
touchpanels. The table below lists all parts included with the BB-15L.
Supplied Components
DESCRIPTION PART NUMBER QUANTITY
Wall Mount Enclosure Assembly 4500078 1
Mounting Bracket 2004218 2
Cover Plate 2012865 1
Screw, 06-32, 1/4” L, pan phillips 2007213 4
Screw, 08-8B, 1/4” L, pan phillips, self-tapping 2007277 1
Screw, 06-32, 1 1/2" L, pan phillips 2007254 8
The mounted view of the BB-15L is shown in the following diagram.
BB-15L Mounted View (Optional Cover Plate Attached)
HOLES FOR STANDARD DRYWALL SCREWS
OR NAILS TO MOUNT BACK BOX TO STUD
ALTERNATE HOLES LOCATED INSIDE BACK BOX
Installation Guide - DOC. 6362A Wall Mount Back Box: BB-15L • 1
Wall Mount Back Box Crestron BB-15L
The dimensions of the BB-15L are shown in the following diagram.
Dimensional Drawing (Fully Assembled without Cover Plate)
13.97 in
(35.49 cm)
13.34 in
(33.89 cm)
14.31 in
(36.36 cm)
BACK BOX (ASSEMBLED)
12.67 in
(32.18 cm)
3.06 in
(7.77 cm)
13.36 in
(33.93 cm)
16.45 in
(41.78 cm)
3.31 in
(8.41 cm)
13.59 in
(34.53 cm)
COVER PLATE
• Wall Mount Back Box: BB-15L Installation Guide - DOC. 6362A
2
0.03 in
(0.08 cm)
Crestron BB-15L Wall Mount Back Box
Installation
Assembly
Required Tools:
• #2 Phillips tip screwdriver
Complete the following assembly procedure in the order provided (refer to
illustration below).
1. Remove knockouts as required.
2. Attach the supplied #08-8B self-tapping screw to the enclosure assembly
for grounding.
3. Attach upper and lower mounting brackets to the enclosure assembly using
supplied (4) #6-32 x 1/4” screws.
Assembly View
#6-32 X 1/4"L PAN HEAD SCREW (2007213)
QTY. 4
MOUNTING BRACKETS, (2004218) QTY. 2
ENCLOSURE ASSEMBLY (4500078) FOR
TOUCHPANEL QTY. 1
#08-8B 1/4"L SELF TAPPING SCREW
(2007277) FOR GROUND PURPOSES
Installation Guide - DOC. 6362A Wall Mount Back Box: BB-15L
• 3
Wall Mount Back Box Crestron BB-15L
D
Mounting
Required Tools:
• #2 Phillips tip screwdriver or hammer
• Level
Complete the following procedure (refer to illustration below) to mount the
assembly.
1. Position the back box to the front edge of the stud and align it as even and
as flush as possible.
2. Use the level and verify that the back box is horizontal. Leveling must be
done before proceeding.
3. Attach the back box to the right side of the stud with standard drywall
screws or nails (supplied by other). If the mounting brackets cannot be used
due to the back box location (i.e. above/below a crossbeam), remove the
brackets and attach the back box to the left or right side of stud using the
holes on the side of the back box.
NOTE: The back box can also be mounted to the left side of the stud by
rotating the back box so the mounting brackets and/or mounting holes are
on the right.
4. Feed cables through knockout holes.
NOTE: This back box should use Class 2 wiring only.
Mounted View with Cover Plate (Mounting Example - Drywall Not Shown)
IT IS IMPORTANT THAT THESE
SURFACES BE AS EVEN AND
FLUSH AS POSSIBLE WHEN
MOUNTING BACK BOX
SCREW, #6-32, 1-1/2"L
PAN HEAD SCREW
(2007254) QTY. 8
ALTERNATE
MOUNTING
HOLES
BACK BOX MUST BE
METAL COVER PLATE (2012865 SUPPLIED)
USE TO COVER CUTOUT IN THE DRYWALL
IF TOUCHPANEL IS NOT INSTALLED
(IF REQUIRED BY LOCAL BUILDING CODES)
• Wall Mount Back Box: BB-15L Installation Guide - DOC. 6362A
4
MOUNTED TO THE STU
AS LEVEL AS POSSIBLE
Crestron BB-15L Wall Mount Back Box
Refer to the following illustration for cutout dimensions.
Drywall Cutout Dimensions
7
~13
in
64
~12
(329 mm Max)
3
in
~12
4
(324 mm Max)
(333 mm Max)
DO NOT EXCEED
THIS DIMENSION
61
in
64
5
in
~1
64
(28 mm Max)
TYP (4X)
21
~3
in
32
(93 mm Max)
5
in
~
64
13
in
~6
64
(158 mm Max)
Ø ~
3
in
16
(5 mm Max)
3
~
16
(2 mm Max)
in
(5 mm Max)
~13
1
in
2
TYP (4X)
(343 mm Max)
DO NOT EXCEED
THIS DIMENSION
CAUTION: A 12-inch (minimum) air gap above and below the touchpanel is
required when positioning the BB-15L.
NOTE: Confirm that the eight tapped holes on the front of the back box are exposed
to accept the touchpanel mounting screws.
NOTE: Cut the drywall to the inside edge of the front of the back box and notch
where needed for the screwholes.
5. Complete the installation by either installing the touchpanel, leaving
the hole open (if permitted by local building codes), or installing the
supplied cover plate with the included #6-32 x 1½” screws. If the
touchpanel is to be installed, refer to the latest revision of the
TPS-12L/15L/17L Operations Guide (Doc. 6355), TPS-12G/15G-L
Operations Guide (Doc. 6356), or the TPMC-15/17-L Series
Operations Guide (Doc. 6354) for installation instructions.
Installation Guide - DOC. 6362A Wall Mount Back Box: BB-15L
• 5
Wall Mount Back Box Crestron BB-15L
Other Mounting Option Accessories
If too much of the front of the back box is exposed after the drywall is cut, you may
need to patch the area. Crestron offers the following accessories:
• MMK-15L (Doc. 6364) - for larger repairs to and to fill in larger
irregularities around the opening (requires plastering).
• TMK-15L (Doc. 6365) - for smaller repairs and to provide a smooth edge at
the opening. This option provides a finished appearance and is preferred
when wallpaper is hung.
The manuals for the MMK-15L and TMK-15L are available for review from the
Crestron website (http://www.crestron.com/manuals).
Further Inquiries
If you cannot locate specific information or have questions after reviewing this
guide, please take advantage of Crestron's award winning customer service team by
calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
For assistance in your local time zone, refer to the Crestron website
(www.crestron.com) for a listing of Crestron worldwide offices.
Future Updates
You can also log onto the online help section of the Crestron website to ask
questions about Crestron products. First-time users will need to establish a user
account to fully benefit from all available features.
This product is Listed to applicable UL Standards and requirements by Underwriters
Laboratories Inc.
(E227280)
As of the date of manufacture, the BB-15L has been tested and found to comply with
specifications for CE marking.
As Crestron adds improvements to the BB-15L, additional information may be made
available as manual updates. These updates are solely electronic and serve as
intermediary supplements prior to the release of a complete technical documentation
revision.
Check the Crestron website periodically for manual update availability and its
relevance. Updates are identified as an “Addendum” in the Download column.
• Wall Mount Back Box: BB-15L Installation Guide - DOC. 6362A
6
Crestron BB-15L Wall Mount Back Box
Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange, or service without prior authorization
from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory
and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying
the nature of the problem, name and phone number of contact person, RMA number, and
return address.
2. Products may be returned for credit, exchange, or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight
prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J., or its authorized subsidiaries, with
RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect
or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its
sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any
products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be paid by CRESTRON,
shipping by standard ground carrier. In the event repairs are found to be non-warranty, return
freight costs shall be paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials
and workmanship under normal use for a period of three (3) years from the date of purchase from
CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical
parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and
overlay components are covered for 90 days; batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON
dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if
any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended, or if it has been subjected to misuse, accidental
damage, modification, or improper installation procedures. Furthermore, this warranty does not cover any
product that has had the serial number altered, defaced, or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic damages
inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim made by a
third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or
labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the
unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or
implied, nor authorizes any other party to offer any warranty, including any implied warranties of
merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law are
limited to the terms of this limited warranty. This warranty statement supercedes all previous warranties.
Trademark Information
All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered trademark
of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation.
Installation Guide - DOC. 6362A Wall Mount Back Box: BB-15L
• 7
Crestron Electronics, Inc. Installation Guide – DOC. 6362A
15 Volvo Drive Rockleigh, NJ 07647 (2013138)
Tel: 888.CRESTRON 11.05
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Loading...