The BB-1000L is a pre-construction mounting option for the Series 1000 Wall
Mounted Touchpanels and the APAD Wall Mount Controller. The table below lists
all parts included with the BB-1000L.
Supplied Components
DESCRIPTIONPART NUMBERQUANTITY
Wall Mount Enclosure20044231
Mounting Plate20048061
Mounting Bracket20042182
Cover Plate20048261
Screw, 06-32, 1/4” L, pan phillips20072138
Screw, 8B, 1/4” L, pan phillips20072771
Screw, 04-40, 1 1/2" L, pan phillips20071904
The mounted view of the BB-1000L is shown below.
BB-1000L Mounted View (Optional Cover Plate Not Attached)
5.72 in
(14.53 cm)
6.20 in
(15.75 cm)
3.25 in
(8.26 cm)
Installation Guide - DOC. 6060A Wall Mount Back Box: BB-1000L • 1
Wall Mount Back Box Crestron BB-1000L
Installation
Assembly
Required Tools
Procedure
• #2 Phillips tip screwdriver
Complete the following assembly procedure in the order provided (refer to
illustration below).
1. Remove knockouts as required.
2. Attach supplied #8 self-tapping screw to wall mount enclosure for
grounding.
3. Attach mounting brackets to wall mount enclosure using supplied (4) #6-32
x ¼” screws.
4. Attach front mounting plate to wall mount enclosure using supplied (4) #632 x ¼” screws.
Assembly View
#6-32 x 1/4"L SCREW (2007213)
QTY. 8 TOTAL
(4 USED FOR MOUNTING BRACKETS)
MOUNTING BRACKET (2004218)
QTY. 2
ATTACH BEFORE ATTACHING FRONT
MOUNTING PLATE
#6-32 x 1/4"L SCREW (2007213)
QTY. 8 TOTAL
(4 USED FOR FRONT MOUNTING PLATE)
#8 SELF-TAPPING SCREW
(2007277)
FOR GROUND PURPOSES
WALL MOUNT ENCLOSURE
(2004423)
QTY. 1
FRONT MOUNTING PLATE (2004806), QTY. 1
ATTACH AFTER ATTACHING MOUNTING BRACKETS
2
• Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060A
Crestron BB-1000L Wall Mount Back Box
Mounting
NOTE: This device must be installed in accordance with local building codes.
Required Tools
Procedure
• #2 Phillips tip screwdriver
• Level
Complete the following procedure (refer to illustration below) to mount the
assembly.
1. Position assembly to the front edge of the stud and align it as even and as
flush as possible.
2. Use the level and verify that the back box is horizontal. Leveling must be
done before proceeding.
3. Attach the assembly to the left or right side of the stud with standard
drywall screws or nails (supplied by other).
4. Feed cable through knockout holes.
Mounted View with Cover Plate (Mounting Example - Drywall Not Shown)
HOLES FOR STANDARD
DRYWALL SCREWS
OR NAILS TO MOUNT
BACK BOX
IT IS IMPORTANT THAT THESE
TWO SURFACES BE AS EVEN AND
FLUSH AS POSSIBLE WHEN
MOUNTING BACK BOX
BACK BOX MUST BE MOUNTED
TO THE STUD AS LEVEL AS
POSSIBLE
METAL COVER PLATE 2004826
USE TO COVER CUTOUT IN THE
DRYWALL IF DEVICE IS NOT
INSTALLED (OPTIONAL).
QTY.4 #4-40 X 1 1/2"L
(2007190)
5. After installing drywall, carefully create a square cutout measuring
4 7/16 inches (113 mm) by 4 7/16 inches.
NOTE: Confirm that the four tapped holes in the mounting plate are
exposed to accept the device’s mounting screws.
Installation Guide - DOC. 6060A Wall Mount Back Box: BB-1000L
• 3
Wall Mount Back Box Crestron BB-1000L
6. Complete the installation by either installing the device, leaving the hole
open (if permitted by local building codes), or installing the supplied cover
plate with #6-32 x 1½” screws. Refer to the illustration below.
Mounted BB-1000L with Optional Cover Plate Installed
4.65 in
(11.81 cm)
4.74 in
(12.04 cm)
Other Mounting Option Accessories
If too much of the cover plate is exposed after the drywall is cut, you may need to
patch the area. Crestron provides the following accessories:
• MMK-1000L (Doc. 6062) - for larger repairs to and to fill in larger
irregularities around the opening (requires plastering).
• TMK-1000L (Doc. 6063) - for smaller repairs and to provide a smooth edge
at the opening. This option provides a finished appearance and is preferred
when wallpaper is hung.
The manuals for the MMK-1000L and TMK-1000L are available for review from
the Crestron website (http://www.crestron.com/manuals
).
4
• Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060A
Crestron BB-1000L Wall Mount Back Box
Reference Documents
The latest version of all documents mentioned within the guide can be obtained from
the Crestron website (http://www.crestron.com/manuals
of product manuals arranged in alphabetical order by model number.
List of Related Reference Documents
DOCUMENT TITLE
APAD Wall Mount LCD Controller
LC-1000 BriteTouch® 3.8" Wall Mount Touchpanel
MMK-1000L Mud Ring for PMK-1000L or BB-1000L
TMK-1000L Trim Ring for PMK-1000L or BB-1000L
). This link will provide a list
Further Inquiries
If you cannot locate specific information or have questions after reviewing this
guide, please take advantage of Crestron's award winning customer service team by
calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
For assistance in your local time zone, refer to the Crestron website
(http://www.crestron.com/
) for a listing of Crestron worldwide offices.
Future Updates
You can also log onto the online help section of the Crestron website to ask
questions about Crestron products. First-time users will need to establish a user
account to fully benefit from all available features.
As Crestron improves functions, adds new features, and extends the capabilities of
the BB-1000L, additional information may be made available as manual updates.
These updates are solely electronic and serve as intermediary supplements prior to
the release of a complete technical documentation revision.
Check the Crestron website periodically for manual update availability and its
relevance. Updates are identified as an “Addendum” in the Download column.
Installation Guide - DOC. 6060A Wall Mount Back Box: BB-1000L
• 5
Wall Mount Back Box Crestron BB-1000L
Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange, or service without prior authorization
from CRESTRON. To obtain warranty service for CRESTRON products, contact an
authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory
and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying
the nature of the problem, name and phone number of contact person, RMA number, and
return address.
2. Products may be returned for credit, exchange, or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight
prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with
RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect
or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its
sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any
products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be paid by CRESTRON,
shipping by standard ground carrier. In the event repairs are found to be non-warranty, return
freight costs shall be paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials
and workmanship under normal use for a period of three (3) years from the date of purchase from
CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical
parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and
overlay components are covered for 90 days; batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON
dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if
any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended, or if it has been subjected to misuse, accidental
damage, modification, or improper installation procedures. Furthermore, this warranty does not cover any
product that has had the serial number altered, defaced, or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic damages
inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim made by a
third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or
labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the
unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or
implied, nor authorizes any other party to offer any warranty, including any implied warranties of
merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law are
limited to the terms of this limited warranty. This warranty statement supersedes all previous warranties.
Trademark Information
All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered trademark
of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation.
6
• Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060A
Crestron BB-1000LWall Mount Back Box
This page is intentionally left blank.
Installation Guide - DOC. 6060A Wall Mount Back Box: BB-1000L
• 7
Crestron Electronics, Inc. Installation Guide – DOC. 6060A
15 Volvo Drive Rockleigh, NJ 07647 2002104
Tel: 888.CRESTRON 07.06
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.