Crestron AADS-XM Operating Manual
Crestron Adagio™ AADS Audio Distribution System
Audio Distribution System:
Adagio AADS
Purpose
The purpose of this addendum is to provide correction to errant statement(s) and
provide additional information not supplied with the original Audio Distribution
System Operations Guide (Doc. 6458). Specifically, this addendum:
• Corrects description of the outputs listed in the specification table on
page 6.
• Corrects description of IR port on page 13.
• Corrects pinout description for serial port, which appears on page 13.
• Corrects the hardware hookup diagram on page 19.
• Adds missing authorized software user information, which should have
appeared on page 54.
• Adds missing Software License Agreement, which should have
appeared on page 63.
Correction for Outputs In Specification Table
The original release of the Operations Guide incorrectly describes the infrared
capabilities of the AADS in the Specifications section. The description of the
infrared capabilities should read as follows:
Correction for Description of Outputs
SPECIFICATION DETAILS
Outputs
Tuner
Maximum Output
Output Impedance
Infrared
IR output
(2) unbalanced stereo line-level audio
outputs for tuner output signals to connect
to AAE
AM/FM: 1 V
XM: 2 V
100 Ohms
(4) mini-phone jack, IR port
Up to 1.2 MHz
rms
rms
Addendum #1 for DOC. 6458 Audio Distribution System: Adagio AADS • 1
Audio Distribution System Crestron Adagio™ AADS
Correction for Description of IR Port
The original release of the Operations Guide incorrectly describes the IR OUT ports.
The physical description of the IR OUT ports should read as follows:
Correction for Description of IR Port
# CONNECTORS,
CONTROLS, &
INDICATORS1
24 IR OUT
(4) 3.5mm tip-ring-sleeve (TRS) miniphone ports enables IR communications
using the Crestron Infrared Emitter Probe
(part number STIRP, sold separately) for
controlling infrared devices.
Tip
Ring
Sleeve
Tip: IR Data Out
Ring: No Connection
Sleeve: Ground
Correction for Serial Port Pin Assignment
The original release of the Operations Guide incorrectly describes the pin
assignments of the serial port. The physical description of the serial port should read
as follows:
Correction for Description of Serial Port
DESCRIPTION
# CONNECTORS,
CONTROLS, &
INDICATORS
26 COM A
(Continued on following page)
1
DESCRIPTION
(1) DB9, male, bidirectional RS-232 port;
Up to 115.2k baud with hardware and
software handshaking support for
communication with serial devices. Can
also be used for modem communications.
The following table lists the pin
assignments of the serial ports.
2 • Audio Distribution System: Adagio AADS Addendum #1 for DOC. 6458
Loading...