Cres Cor H-339-XUA-8C User Manual

INSULATED UNDERCOUNTER

HOT CABINET

MODEL H-339-XUA-8C

(FOR A VARIETY OF PAN SIZES)

FEATURES AND BENEFITS:

• Fully insulated undercounter hot cabinet keeps
prepared foods at serving temperatures. Ideal
for transport

• Powerful, yet efcient, 900 Watt heating system
maintains the right temperature to properly hold
products. Heats up to 200˚F (93˚C).

• Internal frame in body and door maintains
structural rigidity.

JOB:

ITEM NO:

• Body constructed of non-corrosive, Hi-Tensile
aluminum for strength and ease of mobility.
One piece extended base protects cabinet
body.

• Safety-conscious anti-microbial latch protect
against spreading germs.

• Insulated eld reversible door for exibility.
Standard with right hand hinging; left hand
hinging available upon request.

• Magnetic latch for “easy open”; twist-lock
catch secures door during transport. Latch and
hinges mounted inboard.

• Eight sets of chrome plated wire universal
angles accommodate a large variety of pan
sizes on adjustable 1-1/2" centers.

• Pan stops on inside of door and back allow for
proper air ow.

• Heavy duty 3" swivel casters, two with brakes.
Provides mobility when fully loaded.

H-339-XUA-8C

®

C US

ACCESSORIES and OPTIONS
(Available at extra cost):

q Key Lock Handle

q Extra Universal Angles

q Change from standard universal angles to

universal angles designed for transporting

q Corner Bumpers

q Perimeter Bumper

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

q Digital Thermometer

q 240 Volt Service

See page B-20 for accessory details.

Page B-14.1

Oct., 2011

H-339-XUA-8C

CRES COR

MODEL NO.

H-339-XUA-8C

NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)

Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.
Refer to Pan Size Chart at end of section.

2. When ordering bumpers, add 2" to overall dimensions.

ALL ALUMINUM CONSTRUCTION IS RIVETED, WELDED AND FINISHED.

ANGLES

SETS

CABINET:

• Body: .063 aluminum.

• Reinforcement: Internal framework of channels, 1 x 3/4 x .125.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2” in walls; 1” in door, top and bottom.

• Pan stop channels: Mounted to inside rear of cabinet and door.

BASE:

• One piece construction, .125 aluminum.

• Casters: 3" dia., swivel, modulus tires, 1-1/4 wide, load cap. 240
lbs. each, temp. range -45˚/+180˚F. Bearings are sealed and
permanently lubricated. Front casters equipped with brakes.

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

CAP/

8

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

SEE NOTE

BELOW

IN 31-7/8 32-1/4 32-1/4 21-3/4 26-1/4 24-7/8 LBS 155

MM 810 820 820 555 670 635 KG 70

ELECTRICAL COMPARTMENT:

• Control panel: Formed .063 aluminum; black front.

• Thermostat: Electro-mechanical, room ambient to 200˚F (93˚C).

• Switch: Lighted ON-OFF rocker type.

• Power cord: Permanent, 6 ft., 14/3 ga. with molded straight plug.

• Heaters (3): 300 Watts each.

• Thermometer.

POWER REQUIREMENTS:

• 900 Watts, 120 Volts, 60 Hz., single phase, 7.5 Amps., 15 Amp.
service.

DOOR:

• Field reversible.

• Formed .063 aluminum.

• Latch: Chrome plated zinc with composite handle, magnetic
type; mounted inboard.

• Hinges: Heavy duty chrome plated zinc; mounted inboard.

• Gasket: Perimeter type, silicone.

• Transport latch.

• Vent: Adjustable.

PAN SLIDES:

• Wire angles (.306 dia.) nickel chrome plated steel; spaced on 3"
centers, adjustable on 1-1/2" centers.

Cres Cor Insulated Under Counter Hot Cabinet Model
H-339-XUA-8C. Inner, outer and top liners of .063
aluminum, reinforced with channel frame. Field
reversible, formed .063 aluminum door. Fiberglass
insulation in walls 1-1/2”; door, top and bottom 1”. Welded
and nished .125 aluminum base. (3) 300 Watt inner

SHORT FORM SPECIFICATIONS

wall heaters, 120 Volts. (8) sets wire universal angles for
multiple pan sizes, adjustable spacing every 1-1/2". 3"
swivel modulus casters, permanently lubricated. Load
capacity 240 lbs. each. 2 year parts warranty. Provide
the following accessories: . CSA-US,
CSA-C, CSA to NSF4 listed.

WEIGHT

ACT.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2010 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.