Cres Cor H-339-X-12-188C User Manual

Page 1
INSULATED UNDERCOUNTER
HOT CABINET
H-339-X SERIES
(FOR 18" X 26" PANS)
FEATURES AND BENEFITS:
• Fully insulated undercounter hot cabinet keeps prepared foods at serving temperatures. Ideal for transport.
Powerful, yet efcient, 900 Watt heating system maintains the right temperature to properly hold
products. Heats up to 200˚F (93˚C).
• Internal frame in body and door maintains structural rigidity.
JOB:
ITEM NO:
• Body constructed of non-corrosive, Hi-Tensile aluminum for strength and ease of mobility. One piece extended base protects cabinet body.
• Safety-conscious anti-microbial latch protects against spreading germs.
Insulated eld reversible door for exibility. Standard with right hand hinging; left hand hinging available upon request.
• Magnetic latch for “easy open”; twist-lock catch secures door during transport. Latch and hinges mounted inboard.
• Removable pan supports for easy cleaning. Models available:
Wire supports for 18" x 26" pans on 2-3/4" centers. Model H-339-X-188C
Wire supports for 18" x 26" pans and 12" x 20"
pans on 2-3/4" centers. Model H-339-X-12-188C Corrugated supports for 18" x 26" pans on 1-1/2"
centers. Model H-339-X-1813C
• Pan stops on inside of door and back allow for
proper air ow.
Heavy duty 3" swivel casters, two with brakes. Provides mobility when fully loaded.
H-339-X-12-188C
®
C US
ACCESSORIES and OPTIONS (Available at extra cost):
q Key Lock Handle
q Corner Bumpers
q Perimeter Bumper
q Door Window
q Digital Thermometer
q 240 Volt Service
See page B-20 for accessory details.
www.crescor.com
Page B-12.1
Nov., 2013
Page 2
H-339-X Series (18" x 26" Pans)
5/8
3-11/16
9/16
2-3/4
H339X-12-188C H339X-1813C
CRES COR
MODEL NO.
H-339-X-188C 8
H-339-X-12-188C 8*
H-339-X-1813C 13
NOTES: 1. Will also carry 12" x 20" pans, capacity 8.
2. When ordering bumpers, add 2" to overall dimensions.
1-1/2
DETAIL OF PAN SLIDE
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
18 x 26 IN 27-5/8 32-1/4 32 18-3/16 26-1/4 24-7/8 LBS 139
460 x 660 MM 705 820 815 465 670 635 KG 63
18 x 26 IN 27-5/8 32-1/4 32 18-3/16 26-1/4 24-7/8 LBS 139
460 x 660 MM 705 820 815 465 670 635 KG 63
18 x 26 IN 27-5/8 32-1/4 32 18-3/16 26-1/4 24-7/8 LBS 139
460 x 660 MM 705 820 815 465 670 635 KG 63
2-3/4
H339X-188C
4
B
5-15P
A
A
C
B
26
G
W
WEIGHT
ACT.
CABINET:
Body: .063 aluminum.
Reinforcement: Internal framework of channels, 1 x 3/4 x .125.
Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2” in walls; 1” in door, top and bottom.
• Pan stop channels: Mounted to inside rear of cabinet and door.
BASE:
One piece construction, .125 aluminum.
Casters: 3" dia., swivel, modulus tires, 1-1/4 wide, load cap. 240
lbs. each, temp. range -45˚/+180˚F. Bearings are sealed and
permanently lubricated. Front casters equipped with brakes.
DOOR:
• Field reversible.
Formed .063 aluminum.
Latch: Chrome plated zinc with composite handle, magnetic
type; mounted inboard.
Hinges: Heavy duty chrome plated zinc; mounted inboard.
• Gasket: Perimeter type, silicone.
• Transport latch.
• Vent: Adjustable.
PAN SLIDES:
H-339-X-188C, H-339-X-12-188C: Flat wire racks, .104 x 5/8 nickel chrome plated steel, spaced on 2-3/4” centers.
H-339-X-1813C: Corrugations act as pan slides on 1-1/2" centers.
ELECTRICAL COMPARTMENT:
• Cover: Formed .100 aluminum fastened to cabinet top.
Control panel: Formed .063 aluminum; black front.
Thermostat: Solid state, room ambient to 200˚F (93˚C).
• Switch: Lighted ON-OFF rocker type.
Power cord: Permanent, 6 ft., 14/3 ga. with molded straight plug.
Heaters (3): 300 Watts each.
• Thermometer.
POWER REQUIREMENTS:
900 Watts, 120 Volts, 60 Hz., single phase, 7.5 Amps., 15 Amp.
service.
SHORT FORM SPECIFICATIONS
Cres Cor Insulated Under Counter Hot Cabinet Model
H-339-X- C. Inner, outer and top liners of .063 aluminum, reinforced with channel frame. Field reversible, formed .063 aluminum door. Fiberglass insulation in walls 1-1/2”; door, top and bottom 1”. Welded and nished .125 aluminum base. (3) 300 Watt inner wall heaters, 120 Volts. Removable pan supports for ( ) 18" x 26" pans or ( ) 12" x 20" pans. 3" swivel modulus
casters, permanently lubricated. Load capacity 240 lbs.
each. 2-Year Parts / 1-Year Labor warranty. Provide the
following accessories: ____ _____ _____ CSA-US, CSA-C, CSA to NSF4 listed.
In line with its policy to continually improve its products,
www.crescor.com
© Crescent Metal Products, Inc. 2013 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...