Cres Cor H-339-SS-UA-8C User Manual

INSULATED HALF-SIZE

STAINLESS STEEL HOT CABINET

MODEL H-339-SS-UA-8C

(FOR A VARIETY OF PAN SIZES)

FEATURES AND BENEFITS:

• Fully insulated half-size hot cabinet keeps
prepared foods at serving temperatures. Ideal for
transport.

• Powerful, yet efcient, 900 Watt heating system
maintains the right temperature to properly hold

products. Heats up to 200˚F (93˚C).

• Internal frame in body and door maintains
structural rigidity.

JOB:

ITEM NO:

• Stainless steel construction throughout for ease
of cleaning. One piece extended base protects
cabinet body.

• Safety-conscious anti-microbial latch protects
against spreading germs.

• Insulated eld reversible door for exibility.
Standard with right hand hinging; left hand hinging
available upon request.

• Magnetic latch for “easy open”; twist-lock catch
secures door during transport. Latch and hinges
mounted inboard.

• Eight sets of chrome plated wire universal angles
accommodate a large variety of pan sizes on
adjustable 1-1/2" centers.

• Pan stops on inside of door and back allow for

proper air ow.

• Convenient lift handles fold at against sides of
cabinet.

• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.

• Cabinets can be stacked for exibility; specify
optional stacking kit.

H-339-SS-UA-8C

®

C US

ACCESSORIES and OPTIONS
(Available at extra cost):

q Key Lock Handle

q Extra Universal Angles

q Stacking Kit

q Corner Bumpers

q Perimeter Bumper

q Door Window

q Various Caster Options

q Digital Thermometer

q 240 Volt Service

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

See page B-20 for accessory details.

Page B-18

Nov., 2013

H-339-SS-UA-8C

5-1/8

3"

14

B

A

A B

35-1/2

C

DETAIL OF
PAN SLIDE

CRES COR

MODEL NO.

ANGLES

H-339-SS-UA-8C

NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)

Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.
Refer to Pan Size Chart at end of section.

2. When ordering bumpers, add 2" to overall dimensions.

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

CAP/

8

SETS

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

SEE NOTE

BELOW

IN 28-1/16 32-1/4 36-11/16 21-3/4 26-1/4 24-7/8 LBS 235

MM 715 820 935 555 670 635 KG 107

G

W

5-15P

WEIGHT

ACT.

CABINET:

• Body: 22 ga. stainless steel.

• Reinforcement: Internal framework of channels, 1 x 3/4 x .125.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at

75˚F. 1-1/2” in walls; 1” in door, top and bottom.

• Pan stop channels: Mounted to inside rear of cabinet and door.

• Bail handles (4): Two mounted to each side.

BASE:

• One piece construction, .190 aluminum.

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.

250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front

casters equipped with brakes.

DOOR:

• Field reversible.

• Formed 22 ga. stainless steel.

• Latch: Chrome plated zinc with composite handle, magnetic
type; mounted inboard.

• Hinges: Heavy duty chrome plated zinc; mounted inboard.

• Gasket: Perimeter type, silicone.

• Transport latch.

• Vent: Adjustable.

PAN SLIDES:

• Wire angles (.306 dia.) nickel chrome plated steel; spaced on 3"
centers, adjustable on 1-1/2" centers.

ELECTRICAL COMPARTMENT:

• Cover: Formed 18 ga. stainless steel fastened to cabinet top.

• Control panel: Formed .063 aluminum; black front.

• Thermostat: Solid state, room ambient to 200˚F (93˚C).

• Switch: Lighted ON-OFF rocker type.

• Power cord: Removable, 6 ft., 14/3 ga. with molded straight plug.

• Heaters (3): 300 Watts each.

• Thermometer.

POWER REQUIREMENTS:

• 900 Watts, 120 Volts, 60 Hz., single phase, 7.5 Amps., 15 Amp.
service.

SHORT FORM SPECIFICATIONS

Cres Cor Insulated Half-Size Hot Cabinet Model
H-339-SS-UA-8C. Cabinet and door 22 ga. stainless
steel; reinforced with channel frame. Field reversible.
Fiberglass insulation in walls 1-1/2”; door, top and bottom

1”. Welded and nished .190 aluminum base. (3) 300
Watt inner wall heaters, 120 Volts. (8) sets wire universal

angles for multiple pan sizes, adjustable spacing every
1-1/2". Two bail handles on each side. 5" swivel modulus
casters, Delrin bearings. Load capacity 250 lbs. each.
2-Year Parts / 1-Year Labor warranty. Provide the
following accessories: ____ _____ _____ CSA-US,

CSA-C, CSA to NSF4 listed. Energy Star Qualied.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2013 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.