Cres Cor H-339-SS-128C User Manual

Page 1
INSULATED HALF-SIZE
STAINLESS STEEL HOT CABINETS
H-339-SS-128C
(FOR 12" X 20" PANS)
FEATURES AND BENEFITS:
• Fully insulated half-size hot cabinet keeps prepared foods at serving temperatures.
Powerful, yet efcient, 900 Watt heating system maintains the right temperature to properly hold
products. Heats up to 200˚F (93˚C).
• Internal frame in body and door maintains structural rigidity.
• Stainless steel construction throughout for ease of cleaning. One piece extended base protects cabinet body.
JOB:
ITEM NO:
• Safety-conscious anti-microbial latch protects against spreading germs.
Insulated eld reversible door for exibility. Standard with right hand hinging; left hand hinging available upon request.
• Magnetic latch for “easy open”; twist-lock catch secures door during transport. Latch and hinges mounted inboard.
• Removable wire pan supports for easy cleaning
hold 12" x 20" pans on 2-3/4" centers.
• Pan stops on inside of door and back allow for
proper air ow.
Convenient lift handles fold at against sides of cabinet.
• Heavy duty 5" swivel casters, two with brakes. Provides mobility when fully loaded.
Cabinets can be stacked for exibility; specify optional stacking kit.
H-339-SS-128C
®
C US
ACCESSORIES and OPTIONS (Available at extra cost):
q Key Lock Handle
q Stacking Kit
q Pan Support Interior For 13" x 18" Trays
q Corner Bumpers
q Perimeter Bumper
q Door Window
q Various Caster Options
q Digital Thermometer
q 240 Volt Service
See page B-20 for accessory details.
www.crescor.com
Page B-17
Nov., 2013
Page 2
H-339-SS-128C
PAN SLIDE
9-1/2
3/4
B
A
2-3/4
DETAIL OF
CRES COR
MODEL NO.
CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
H-339-SS-128C 8
NOTES: 1. When ordering bumpers, add 2" to overall dimensions.
2. When stacking two cabinets, width will increase to 24-5/8".
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
12 x 20 IN 18-7/8 27-1/4 36-11/16 13-3/16 21-1/4 24-7/8 LBS 155
305 x 510 MM 480 695 935 335 540 635 KG 70
CABINET:
• Body: 22 ga. stainless steel.
Reinforcement: Internal framework of channels, 1 x 3/4 x .125.
Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2” in walls; 1” in door, top and bottom.
• Pan stop channels: Mounted to inside rear of cabinet and door.
Bail handles (4): Two mounted to each side.
BASE:
One piece construction, .190 aluminum.
Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
DOOR:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latch: Chrome plated zinc with composite handle, magnetic type; mounted inboard.
• Hinges: Heavy duty chrome plated zinc; mounted inboard.
• Gasket: Perimeter type, silicone.
• Transport latch.
• Vent: Adjustable.
PAN SLIDES:
Flat wire racks, .104 x 5/8 nickel chrome plated steel, spaced on 2-3/4” centers.
A B
C
1-1/4
G
W
5-15P
WEIGHT
ACT.
ELECTRICAL COMPARTMENT:
• Cover: Formed 18 ga. stainless steel fastened to cabinet top.
Control panel: Formed .063 aluminum; black front.
Thermostat: Solid state, room ambient to 200˚F (93˚C).
• Switch: Lighted ON-OFF rocker type.
Power cord: Removable, 6 ft., 14/3 ga. with molded straight plug.
Heaters (3): 300 Watts each.
• Thermometer.
POWER REQUIREMENTS:
900 Watts, 120 Volts, 60 Hz., single phase, 7.5 Amps., 15 Amp.
service.
SHORT FORM SPECIFICATIONS
Cres Cor Insulated Half-Size Hot Cabinet Model H-339-SS-128C. Cabinet and door 22 ga. stainless steel; reinforced with channel frame. Field reversible
door. Fiberglass insulation in walls 1-1/2”; door, top and bottom 1”. Welded and nished .190 aluminum base. (3) 300 Watt inner wall heaters, 120 Volts. Removable pan supports for (8) 12" x 20" pans on 2-3/4" centers. Two
bail handles on each side. 5" swivel modulus casters,
Delrin bearings. Load capacity 250 lbs. each. 2-Year Parts / 1-Year Labor warranty. Provide the following
accessories: ____ _____ _____ CSA-US, CSA-C,
CSA to NSF4 listed. Energy Star Qualied.
In line with its policy to continually improve its products,
www.crescor.com
© Crescent Metal Products, Inc. 2013 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...