Cres Cor H-138-S-1834C User Manual

STAINLESS STEEL HOT CABINET

MODEL H-138-S-1834C

FEA TURES AND BENEFITS:

Fully insulated hot cabinet keeps prepared •
foods at serving temperatures.

Powerful, yet effi cient, 1500 Watt heating •
system maintains the right temperature to
properly hold products. Heats up to 200˚F
(93˚C).

Self-contained power top allows interior of •
cabinet to be hosed-out during cleaning.

Internal frame in body maintains structural •
rigidity.

JOB:
ITEM NO:

INSULATED

Stainless steel construction throughout for ease •
of cleaning. One piece extended base protects
cabinet body.

Smooth interior coved corners prevent food •
particles/grease buildup.

Safety-conscious anti-microbial latch protect •
against spreading germs.

Field reversible insulated Dutch doors prevent •
temperature loss. Silicone door gaskets for
proper seal.

Standard with right hand hinging; left hand •
hinging available upon request.

High temperature ceramic magnetic latches •
for "easy open”; twist-lock catch secures door
during transport. Latches and hinges mounted
inboard.

Recessed push/pull handles on both sides •
prevents damage to walls; allows easy
maneuvering.

Channel pan slides securely hold 18" x 26" •
pans on 1-1/2" centers without tipping.

Heavy duty 5" swivel casters, two with brakes. •
Provides mobility when fully loaded.

H-138-S-1834C

®

C US

ACCESSORIES and OPTIONS
(Available at extra cost):

 Tempered Glass Door Windows
 Key Lock Handle
 Lock Hasp
 Corner Bumpers
 Perimeter Bumper
 Floor Lock (for use with 5" casters)
 Various Caster Options
 Removable Cord Set
 208 or 240 Volt Service
 Food Safe Digital Thermometer
 Upgrade to 2000 Watt Power Unit

See page B-20 for accessory details.

®

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

Page B-4.1

Aug., 2010

H-138-S-1834C

H-138-S-1834C

CRES COR

MODEL NO.

H-138-S-1834C 32

NOTES: 1. Send sample pan or tray with order when using any that are not 18" x 26" pans with heavy beaded edges.

2. When ordering bumpers, add 2" to overall dimensions.

ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.

CABINET:

Body: 22 ga. stainless steel.•
Reinforcement: Internal framework of 18 ga. stainless steel.•
Insulation: Fiberglass, thermal conductivity (K factor) is .23 at •
75˚F. 1-1/2" in doors, top, base; 2" in sidewalls.
Air tunnel: 22 ga. stainless steel; lift-out type, mounted on back.•
Push/pull handles (2): 5” vertical; recessed.•
Interior coved corners.•

BASE:

One piece construction, .125 aluminum.•
Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap. •
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

18 X 26 IN 28-3/4 34-3/16 73 18-1/16 27-1/2 58 LBS 272

460 X 660 MM 730 870 1855 460 700 1475 KG 123

HOT UNIT COMPONENTS:

Top mounted; removable with tools.•
Thermostat: Mechanical, room ambient to 200˚F (93˚C).•
Switch: ON-OFF rocker type.•
Power light•
Power cord: Permanent, 10 ft., 14/3 ga.•
Heater: 1470 Watts.•
Blower motor.•
Vent fan.•
Thermometer: Analog.•

POWER REQUIREMENTS:

1500 Watts, 120 Volts, 60 Hz., single phase, 12 Amps., 15 Amp. •
service.

DUTCH DOORS:

Field reversible.•
Formed 22 ga. stainless steel.•
Latches: Chrome plated steel, high temperature ceramic •
magnetic type, mounted inboard.
Transport Latches.•
Hinges: Heavy duty chrome plated steel.•
Gaskets: Perimeter type, silicone.•
Pan stops: Embossed.•

PAN SLIDES:

Channels: Extruded aluminum, 11/16 x 1-1/2 x .100, riveted on •
1-1/2" centers.

Cres Cor Insulated Hot Cabinet Model H-138-S-1834C.
Cabinet 22 ga. stainless steel; stainless steel internal
frame. No-tip .100 aluminum channel slides for (32) 18" x
26" pans on 1-1/2" centers. Field reversible Dutch doors,
22 ga. stainless steel. Fiberglass insulation in sides 2";
doors, top, base 1-1/2". Interior coved corners. Hose out
cleaning capability . 1500 Watt, 125 Volt power unit. One

SHORT FORM SPECIFICATIONS

piece insulated base, .120 aluminum. 5" swivel modulus
casters, Delrin bearings. Load capacity 250 lbs. each. 2
year parts warranty. Provide the following accessories:
. NSF, CSA-US, CSA-C, ENERGY ST AR Qualifi ed.

WEIGHT

ACT.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2010 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and
specifi cations without notice.