Cres Cor H-137-WSUA-5C User Manual

Page 1
INSULATED STAINLESS STEEL
AQUATEMP™ HOT CABINET
MODEL H-137-WSUA-5C
FEATURES AND BENEFITS:
• Fully insulated undercounter hot cabinet keeps prepared foods at serving temperatures.
• Powerful, yet efcient, heating system maintains the right combination of heat and humidity to properly hold products. 2000 Watts of heat holds food at up to 200˚F (93˚C).
• AquaTemp system allows you to hold with humidity by adjusting individual thermostats; regulate humidity levels by controlling air temperature to 180°F (82°C); lowering air temperature allows for humidity up to 95%.
JOB:
• Internal frame in body and doors plus reinforced internal base maintains structural rigidity.
• Stainless steel construction throughout for ease of cleaning.
• Smooth interior coved corners prevent food particle/grease buildup.
• Safety-conscious anti-microbial latch protect against spreading germs.
• Field reversible insulated door prevents temperature loss. Silicone door gaskets for proper seal.
• Standard with right hand hinging; left hand hinging available upon request.
• High temperature ceramic magnetic latches for "easy open”; twist-lock catch keeps door securely closed.
• Five sets of stainless steel wire universal angles accommodate a large variety of pan sizes on adjustable 1-1/2" centers.
• Integral drip trough on front keeps trafc area dry, safer.
• Heavy duty 2-1/2" swivel casters, two with brakes.
H-137-WSUA-5C
¨ N
C US
ACCESSORIES and OPTIONS (Available at extra cost):
q Tempered Glass Door Windows
q Extra Universal Angles
q Transport Angle Kit
q Key Lock Handle
q Food Safe Digital Thermometer
q 208 or 240 Volt Service
See page B-20 for accessory details.
®
5925 Heisley Road • Mentor, OH 44060-1833 Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Gold indicates our Best Insulated Hot Cabinets with the best warranty in the industry. 3-Year Parts / 1-Year Labor.
Page B-6.7
Oct., 2011
Page 2
H-137-WSUA-5C
CRES COR
MODEL NO.
H-137-WSUA-5C
NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)
Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans. Refer to Pan Size Chart at end of section.
2. When ordering bumpers, add 2" to overall dimensions.
ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.
CAP/ANGLES
SETS
CABINET:
• Body: 22 ga. stainless steel.
• Reinforcement: Internal framework of 18 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at 75˚F. 1-1/2" in doors, top, base; 2" in sidewalls.
• Air tunnel: 22 ga. stainless steel; lift-out type, mounted on back.
• Push/pull handles (2): 5” vertical; recessed.
• Interior coved corners.
BASE:
• One piece construction, .125 aluminum.
• Drip trough: Formed 18 ga. stainless steel mounted to front of cabinet; removable drip pan.
• Casters: 2-1/2" dia., swivel, molded rubber tires, 1-1/8" wide, load cap. 160 lbs. each, temp. range -30˚/+160˚F. Self-lube bearings. Front casters equipped with brakes.
DUTCH DOORS:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latch: Chrome plated zinc with composite handle, ceramic magnetic type; mounted inboard.
• Transport Latch.
• Hinges: Heavy duty chrome plated zinc.
• Gaskets: Perimeter type, silicone.
• Pan stops: Embossed.
PAN SLIDES:
• Stainless steel wire universal angles (.306 dia.), mounted on lift-out posts.
• Spaced on 3" centers; adjustable on 1-1/2" centers.
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
5
SEE NOTE
BELOW
IN 28 35-1/4 32 21-1/4 27-1/2 20 LBS 199
MM 715 895 815 540 700 510 KG 90
PROOF/HOT UNIT COMPONENTS:
• Top mounted; removable with tools.
• Thermostat (holding): Solid state, room ambient to 200˚F (93˚C).
• Thermostat (humidity): Solid state, room ambient to 95%.
• Power light
• Switch: rocker type.
• Power cord: Permanent, 10 ft., 12/3 ga.
• Heater: 2000 Watts for holding.
• Blower motor.
• Vent fan.
• Thermometer: Analog.
• Water pan: 4 gallons; 16 ga. 304 stainless steel with 1850 Watt heater for humidity.
POWER REQUIREMENTS:
• 2000 Watts, 120 Volts, 60 Hz., single phase, 16 Amps., 20 Amp. service.
SHORT FORM SPECIFICATIONS
Cres Cor Insulated AquaTemp Under Counter Hot Cabinet Model H-137-WSUA-5C. Cabinet 22 ga. stainless steel; stainless steel internal frame. (5) sets stainless steel wire universal angles for multiple pan sizes, adjustable spacing every 1-1/2". Field reversible door, 22 ga. stainless steel. Fiberglass insulation in sides 2"; doors, top, base 1-1/2". Interior coved corners. 2000 Watt, 120 Volt power unit; adjustable heat and humidity. One piece insulated base, .125 aluminum. 2-1/2" swivel molded casters, Self-lube bearings. Load capacity 160
Gold indicates our Best Insulated Hot Cabinets with the best warranty in the industry. 3-Year Parts / 1-Year Labor.
lbs. each. 3-Year Parts / 1-Year Labor warranty. Provide the following accessories: ____ _____ _____ . NSF, CSA-US, CSA-C listed.
WEIGHT
ACT.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833 Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2011 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...