Cres Cor H137UA9B, H137SUA9 120, H137UA9B 240, H137SUA9 240, H137UA9B 208 User Manual

Insulated

Hot Cabinet

FL-2200

5925 Heisley Road • Mentor, OH 44060-1833

OPERATING and MAINTENANCE INSTRUCTIONS

Models: H137UA9B & H137SUA9 Series Hot Cabinets

ELECTRICAL SPECIFICATIONS:

Model No. Volts Watts Amps Hertz Phase NEMA

H137UA9B
H137SUA9

H137UA9B 240
H137SUA9 240

H137UA9B 208
H137SUA9 208

Models are designed for AC service.

HOW TO INSTALL UNIT:

1. Place cabinet on level oor, in a well ventilated area.

2. Plug cord end into proper wall outlet.

3. Fill water pan if humidity is required.

NOTE: Pan holds 2 quarts (1.9 liters) of water.

120 1500 12.5 60 1 5-15P

240 1500 6.3 60 1 6-15P

208 1500 7.2 60 1 6-15P

Rev. 5 (12/13) Page 1 of 4

HOW TO START UNIT:

1. Turn the POWER switch on.
The yellow light will turn on.

2. Turn thermostat to #10.

3. Preheat the cabinet for 30 minutes.

4. Put the food into the cabinet.

5. Turn thermostat to #8 and close the door.

NOTE: No. 8 is about 185°F (85°C).
No. 6 is about 155°F (68°C).
No. 4 is about 125°F (52°C).

Proper food holding temperature is

140°F (60°C) or higher.

The thermometer shows the temperature inside.

TO TURN OFF UNIT:

Push the POWER switch off;
the yellow light will go out.

Call Toll-free: 877-CRES COR (273-7267) • Fax: [phone] • www.crescor.com

Insulated

Hot Cabinet

FL-2200

Rev. 7 (2/13) Page 2 of 4

OPERATING and MAINTENANCE INSTRUCTIONS

Models: H137UA9B & H137SUA9 Series Hot Cabinets

MAINTENANCE:
HOT UNIT REMOVAL INSTRUCTIONS

1. Unplug power cord from wall outlet.

2. Slide entire unit out the front of the cabinet.

WARNING

BEFORE CLEANING CABINET:

1. Allow the cabinet to cool.

2. Do NOT use abrasives or harsh chemicals.
Is your cabinet aluminum or stainless steel
construction? Be sure your cleaner is suitable
for that material.

Note: Stainless Steel cabinets have an “S” in their

model numbers.

5925 Heisley Road • Mentor, OH 44060-1833

Cleaning hints:

1. Wipe up spills as soon as possible.

2. Clean cabinet regularly to avoid heavy dirt build-up.

3. Make a test spot with cleaner.

4. Follow manufacturer’s directions on cleaner.

5. Do not mix cleaners.

6. Avoid drips and splashes.

7. Do not use “Cres Clean” on plastic parts or labels.

HOW TO CLEAN THE UNIT:

Soil Cleaner Method

Mild Detergent* and hot water, or
mild abrasive cleaner.

Dirt

Steam (no strong alkaline additive)

Mild abrasive cleaner.
Oily or waxy cleaner.

Fingerprints, grease, oil

Chemical oven cleaner.

Water Spots Mild abrasive cleaner.

*Mild detergent includes soaps and non-abrasive cleaners.

1. Wipe with soft, damp cloth.

2. Rinse with hot water.

3. Wipe Dry.

1. Rinse after steam cleaning.

2. Wipe Dry

Apply with soft, clean cloth.

Follow oven cleaner manufacturer’s
instructions

1. Apply with soft, clean cloth.

2. Wipe with damp cloth.

Note: Gaskets are removable for cleaning.

Call Toll-free: 877-CRES COR (273-7267) • Fax: [phone] • www.crescor.com