Cres Cor H137S27D1TB, H137S27D1LTB, H137S273D1TB, H137S273D1LTB Operators Manual

Insulated

Hot Cabinet

FL-2382-TB

5925 Heisley Road • Mentor, OH 44060-1833

OPERATING and MAINTENANCE INSTRUCTIONS

Taco Bell Hot Cabinet

Full Size Model: H137S27D1TB & H137S27D1LTB

Half Size Model: H137S273D1TB & H137S273D1LTB

Rev. 2 (1/16) Page 1 of 5

H137S27D1TB

H137S27D1LTB

Cabinet model number:

Cabinet serial number:

Authorized Service Agency:

Ph: Fax:

Keep this manual for future reference.

Call Toll-free: 877-CRES COR (273-7267) • Fax: [phone] • www.crescor.com

H137S273D1TB

H137S273D1LTB

Insulated

Hot Cabinet

FL-2382-TB

Rev. 2 (1/16) Page 2 of 5

5925 Heisley Road • Mentor, OH 44060-1833

OPERATING and MAINTENANCE INSTRUCTIONS

Taco Bell Hot Cabinet

Model: H137S27DITB

ELECTRICAL SPECIFICATIONS:

Model No. Volts Watts Amps Hertz Phase NEMA

H137S27D1TB
H137S27D1LTB

H137S273D1TB
H137S273D1LTB

120 2000 16.7 60 1 5-20P

120 1500 12.5 60 1 5-20P

INSTALLATION:

1. Remove all paper, packing materials and parts
from inside of cabinet.

2. Remove protective paper and vinyl material from
outside surfaces of cabinet.

3. Place the cabinet in a well-ventilated area.

4. Place cabinet on level oor. Cabinet legs are
adjustable by turning bottom of foot to level the
cabinet.

5. Install tunnels. Note that there is a right hand and

left tunnel. Check t.

6. Install hot unit on cabinet top and insert angles
into slots on tunnels.

7. Plug cord end into proper wall outlet.

Air is VERY HOT

WARNING

FIRST TIME START-UP:

when door is opened.

NOTE: DO NOT PUT FOOD INTO CABINET!
This step is to burn off manufacturing oils and excess
adhesive.

2. Let the cabinet cool and wipe inside clean with

detergent and hot water before rst use.

3. Let the cabinet cool and wipe inside clean with

detergent and hot water before rst use.

HOW TO HOLD:

1. Push POWER switch to “ON.” POWER LIGHT
will come on.

2. The control is preset to maintain an average

temperature of 165°F(74°C). Displayed

temperatures will change during loading and
unloading of product.

3. Preheat cabinet for 45 minutes.

4. Put product into cabinet.

NOTE: Proper food holding temperature is

140°F/60°C or higher.

1. Push the POWER switch to “ON”, and run the
unit for one hour.

Call Toll-free: 877-CRES COR (273-7267) • Fax: [phone] • www.crescor.com

HOW TO SET TIMER:

See FL-2383 for instructions.