Cres Cor H-135-WSUA-11 User Manual

INSULATED

C US

®

AQUATEMP™ HOT CABINET

MODEL H-135-WSUA-11

FEATURES AND BENEFITS:

• Fully insulated holding cabinet keeps prepared
foods at serving temperatures.

• Powerful, yet efcient, 2000 Watt heating system
maintains the right combination of heat and
humidity to properly hold products.

• Humidity system allows you to regulate humidity

levels by controlling air temperatures to 200°F
(93°C). Lowering air temperatures allows for

humidity up to 95%

• Integral drip trough on front keeps trafc area dry,
safer.

• Internal frame in body maintains structural rigidity.

• Body constructed of non-corrosive, stainless steel
for strength and ease of cleaning.

SANITATION

NSF/ANSI 4

JOB:

ITEM NO:

®

H-135-WSUA-11

• Insulated Dutch doors prevent temperature loss;
door gaskets for proper seal. Field reversible for

exibility.

• Standard with right hand hinging; left hand
hinging available upon request.

• Recessed push/pull handles on both sides
prevent damage to walls; allows easy
maneuvering.

• Safety-conscious anti-microbial latches reduce
the spread of germs.

• Eleven sets of wire universal angles
accommodate a large variety of pan sizes on

adjustable 1-1/2" centers.

• Slanted control panel has easy-to-read
thermometer; digital thermometer available upon
request. Entire assembly removable for cleaning
and maintenance.

• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.

ACCESSORIES and OPTIONS
(Available at extra cost):

q Full View Window Door

q Aluminum Powder Coat Doors

q Extra Universal Angles

q Corner Bumpers

q Perimeter Bumper

q Push Handle

q 208 or 240 Volt Service

q Food Safe Digital Thermometer

See page B-30 for accessory details.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

Page B-9.2

Jan., 2017

H-135-WSUA-11

G

6-20P

Scan QR code to view Spec Sheet,
Operating Manual, Wiring Diagram or
to call Cres Cor

®

Customer Service.

If you need a QR reader, visit your
App Store on your Smartphone or
Tablet.

Model
H-135-WSUA-11

8400-013

B

A

G

B

C

W

5-20P

CRES COR

MODEL NO.

H-135-WSUA-11

CAP/ANGLES

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

11

SETS

SEE NOTE

BELOW

IN 25-3/4 33-1/2 69-3/4 21 27 54 LBS 225

MM 655 850 1775 533 690 1375 KG 102

NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)

Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.
Refer to Pan Size Chart at end of section.

2. When ordering bumpers, add 2" to overall dimensions.

CABINET:

• Body: 22 ga. stainless steel.

• Reinforcement: Internal framework of .100 aluminum.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at

75˚F, 1" insulation in sidewalls and doors, 1-1/2" in top and back.

• Air tunnel: 22 ga. stainless steel; lift-out type, mounted on back

panel.

• Push/pull handles (2): Black plastic; 5-1/2” vertical; recessed.

BASE:

• Full base construction, .125 aluminum.

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.

250 lbs. each, temp. range -40˚/+180˚F. Delrin bearings. Front

casters equipped with brakes.

DUTCH DOORS:

• Field reversible.

• Formed 20 ga. stainless steel.

• Gaskets: Perimeter type, silicone rubber.

• Latches: Magnetic type with anti-microbial pull handle.

• Hinges (4): Chrome plated high-pressure cast zinc.

PAN SLIDES:

• Wire angles (.306 dia.) nickel chrome plated steel, mounted on

lift off posts.

• Spaced on 4-1/2" centers; adjustable on 1-1/2" centers.

Scan QR code to view Spec Sheet,

Operating Manual, Wiring Diagram
or to call Customer Service.

If you need a QR reader visit your App
Store on your Smartphone or Tablet.

HOT UNIT COMPONENTS:

• Removable bottom mount hot unit.

• Body: Formed .063 aluminum with black control panel.

• Thermostat (holding): Electro-mechanical, room ambient to

200°F (93°C).

• Thermostat (humidity): Electro-mechanical, room ambient to 95%.

• Pilot light.

• Switch: ON-OFF rocker type.

• Power cord: Permanent, 6 ft., 14/3 ga. with molded right angle plug.

• Heaters (2): 960 Watts for holding.

• Blower motor.

• Thermometer.

• Water pan: 3-1/2 quart; 22 ga. 304 stainless steel with 960 Watt

heater for humidity.

POWER REQUIREMENTS:

• 2000 Watts, 120 Volts, 60 Hz., single phase, 16 Amps., 20 Amp.

service.

SHORT FORM SPECIFICATIONS

Cres Cor Insulated Holding Cabinet Model H-135-WSUA-11.
Inner, outer and top liners of 22 ga. stainless steel.
(11) sets wire angles for multiple pan sizes, adjust able
spacing every 1-1/2". Field reversible Dutch doors, 20
ga. stainless steel. Insulated with 1-1/2” berglass in top
and back, 1" in sidewalls and doors. Removable 2000
Watt, 120 Volt power unit. Full base, .125 aluminum. 5"
swivel modulus casters, Delrin bearings. Load capacity
250 lbs. each. 2-Year Parts / 1-Year Labor warranty.

Provide the following accessories: ____ _____ _____

CSA-US, CSA-C, CSA to NSF4 listed.

WEIGHT

ACT.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2017 All rights reserved. Made in America Since 1936

In line with its policy to continually improve its products,
CRES COR reserves the right to change materials and

specications without notice.