Cres Cor H135UA11, H135UA11240, H135SUA11240 Service Manual

5925 Heisley Road • Mentor, OH 44060-1833

OPERATING and MAINTENANCE INSTRUCTIONS

H135UA11 Hot Cabinet (Aluminum)

H135SUA11 Hot Cabinet (Stainless Steel)

Model No. Volts Watts Amps Hertz Phase NEMA

Hot Cabinets

Rev. 4 (3/13) Page 1 of 4

FL-2328

H135UA11
H135SUA11

H135UA11240
H135SUA11240

All are designed for AC service. The above model numbers may be followed by “M”, “L”, “D”, “R” and ending
with “S” or “Z”.

CONTROL PANEL PARTS IDENTIFICATION

1. Power Switch

2. Yellow Light-Power

120 1500 12.3 60 1 5-15P

240 1500 6.1 60 1 6-15P

3. Thermostat

4. Thermometer

HOW TO INSTALL UNIT:

1. Place cabinet near warm ovens. Do NOT put in
drafty areas or near ventilating systems.

2. Plug cord end into proper wall outlet.

HOW TO START UNIT:

1. Turn the POWER switch on. The yellow light will
turn on.

2. Turn thermostat to #10.

3. Preheat cabinet for 30 minutes.

4. Put food into cabinet.

5. Turn thermostat to #8 and close door.

Call Toll-free: 877-CRES COR (273-7267) • Fax: [phone] • www.crescor.com

NOTE: No. 8 setting = approx. 190°F (88°C)

No. 6 setting = approx. 165°F (74°C)

Proper food holding temperature is 140°F (60°C) or
higher. The thermometer shows the temperature inside.

TO TURN OFF UNIT:

1. Turn thermostat off.

2. Turn the POWER switch off.

3. The yellow light will go out.

Hot Cabinets

Rev. 4 (3/13) Page 2 of 4

FL-2328

OPERATING and MAINTENANCE INSTRUCTIONS

H135UA11 Hot Cabinet (Aluminum)

H135SUA11 Hot Cabinet (Stainless Steel)

5925 Heisley Road • Mentor, OH 44060-1833

MAINTENANCE

HOT UNIT REMOVAL INSTRUCTIONS:

1. Unplug power cord from wall outlet.

2. Pull entire unit out the front of the cabinet.

HOW TO CLEAN THE CABINET:

BEFORE cleaning

WARNING

1. Allow cabinet to cool.

2. Remove Hot unit from cabinet.

3. Do NOT use abrasives or harsh
chemicals.

the cabinet:

WARNING

RISK OF FIRE OR ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE

PERSONNEL ONLY

Cleaning Notes:

1. Wipe up spills as soon as possible.

2. Clean cabinet regularly to avoid heavy dirt build-up.

3. Make a test spot with cleaner.

4. Follow manufacturer’s directions on cleaner.

5. Do not mix cleaners.

6. Avoid drips and splashes.

HOW TO CLEAN UNIT:

Soil Cleaner Method

DOORS

Vinyl (Out)

Aluminum (In)

CABINETS

(H137UA11 is

Aluminum)

(H137SUA11 is

Stainless Steel)

Call Toll-free: 877-CRES COR (273-7267) • Fax: [phone] • www.crescor.com

Dirt, Grease and Oil

Dirt

Fingerprints, Grease

and Oil

Water Spots

Mild Detergent* and
water.

Mild detergent* and hot
water, or mild abrasive
cleaner.

Steam (No strong alkaline
additive)

Chemical oven cleaner
for cabinet material

Mild abrasive cleaner; oily
or waxy cleaner

Mild abrasive cleaner.
Oily of waxy cleaner.

1. Wipe with soft, damp cloth.

2. Rinse well.

1. Use soft, damp cloth.

2. Rinse with hot water.

3. Wipe dry.

1. Rinse after steam cleaning.

2. Wipe dry.

Follow oven manufacturer’s directions

Apply with clean, soft cloth. Wipe with
damp cloth.

Apply with soft, clean cloth.
Wipe with damp cloth.