Creative MuVo None User Manual

MuVo_Value_Lft_Nordic.pdf 09/11/2004 11:21:58 AMMuVo_Value_Lft_Nordic.pdf 09/11/2004 11:21:58 AM

Connecting USB Flash Drive to your computer

Before unplugging your player from your computer, use the Windows Eject or Safely Remove Hardware function to safely disconnect your player.

Transferring Music Tracks

1. On your desktop, right-click the My Computer icon, and then click Explore. The USB Flash drive appears as a removable disk icon (Figure 1).

Setup

Transferring Files

1. On your desktop, right-click the My Computer icon, and then click Explore

2. Drag and drop files or folders into your player. The LED on the USB Flash Drive blinks red during data transfer.

If you need to format your player, backup the files in your player first. When you format your player, all songs and files will be deleted. By default, your player is already formatted.

1. Connect your player to your computer's USB port.

2. Launch Windows Explorer on your computer. Your player is

Formatting your player

Your player supports the FAT16/32 (16/32-bit File Allocation Table) file system. Format your player with the FAT file system only.

recognized as a Removable Disk in Windows Explorer.

Troubleshooting

The player's LED does not light up.

Do the following:

Insert a new battery into your player.

Format your player as described above in "Formatting your player".

File transfers to the player are very slow (less than 100kb/sec).

Do the following:

Format your player as described above in "Formatting your player".

After playing the first few music tracks, the player

USB Flash Drive

Battery module

3. Right-click the Removable Disk icon and click the Format option. The Format F:\dialog box appears (replace F:\ with the drive letter of your player).

skips a music track.

Do the following:

Format your player as described above in "Formatting your player".

The player's LED is red and there is no playback.

BUSY VOL

2. Drag and drop .MP3 or .WMA files only into your player.

RESET

USB port

CMY

Product Registration

Enjoy a host of benefits by registering your product during installation, or at

www.creative.com\register.

Do not press the buttons on your USB Flash Drive while connecting it to your computer.

Inserting the battery

Benefits include:

- Service and Product Support from Creative

- Exclusive updates on promotions and events!

A-B

How To Use Your Player

AAA battery

Other Information

For the latest information on your player, go to http://www.creative.com

The LED on the MuVo Memory blinks red during data transfer.

You can use other applications such as Creative MediaSource,

Windows Media player or RealOne to manage the music tracks in your player.

Remember to unplug the USB Flash Drive from your computer and insert it into the battery module before turning on the player.

Turning on the player

Press and hold the Play/Pause button for a few seconds. The LED turns green and there is music playback. If, however, there are no music tracks in your player, the LED turns red.

Turning off the player

Press and hold the Play/Pause button for a few seconds until after the LED turns off.

Pausing a music track

Press the Play/Pause button . The LED turns red.

Figure 1

Overview

Headphones connector

Play/Pause/Power

Dual color LED

Next Track/ Fast Forward

4. Follow the instructions on the screen to format your player.

5. After the formatting is complete, make sure you stop your player before disconnecting it from your computer.

For more information about using Windows Explorer, refer to its online Help.

A-B

Repeat A-B /

A-B

Track

Volume Increase

Volume Decrease

Proper Handling

Repeating a music track

Press and hold the Repeat A-B / Track button for a few seconds. The LED blinks green. To resume normal playback, press the Repeat A-B / Track button again.

A-B

Previous Track/ Rewind

Do the following:

Make sure that there are music tracks stored in your player.

Files/music tracks are corrupted when transferred to the player.

Before unplugging your player from your computer, use the

Windows Eject or Safely Remove Hardware function to safely disconnect your player.

The player's LED turns from green to red instantly when a music track is played.

Using Windows Explorer, delete the SETTINGS.DAT file from your player.

The player turns off immediately after it is turned on.

Using Windows Explorer, delete the SETTINGS.DAT file from

your player.

Customer Support Services

and Warranty

Creative Knowledge Base

Resolve and troubleshoot technical queries at Creative's

24-hour self-help Knowledge Base. Go to

http://www.creative.com and select your region.

For more information on Customer Support Services and Warranty details please go to www.creative.com and select your country.

113

Copyright © trademark an d MuVo is a trademark of Creat ive Technology Ltd. NOMAD is a registered trademark of Aonix and is used by Creative Technology Ltd. and/or its affiliates under license. Mircosoft, Windows Media, and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other brand and product names listed are trademarks or registered trademarks of their respec tive holders and are hereby recognized as such. Actual contents may differ slightly from those pictured. MPEG Layer-3 audio compression technology licensed by Fraunhofer IIS and Thomson Multimedia.

If the LED on the player blinks red, the battery power is low. If the LED on the player is a steady red, there are no tracks in your player.

The battery life depends on the type of battery used. It is recommended that you use alkaline batteries. Playing .WMA files with a high bass level may also reduce your battery's life significantly.

Repeating a portion of a music track

Press the Repeat A-B / Track button to mark the beginning of the portion you wish to repeat. The LED blinks green. Press the Repeat A-B / Track button again to mark the end of the portion. The LED blinks green at a slower speed, and the marked portion is played back repeatedly. To resume normal playback, press the Repeat A-B / Track button again.

A-B

Side viewFront view

You can use stickers (included) to label your player. Place the stickers on the space provided at the back of the USB Flash Drive.