Crate & Barrel Puzzle Entertainment Center Assembly Instruction

PUZZLE ENTERTAINMENT CENTER

HARDWARE

Thank you for purchasing the Puzzle Entertainment
Center. This page lists all the contents included in the

box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

32 - cam
screws

32 - large
covers

Missing hardware? Please call 800.606.6387
for replacements.

32 - cams

16 - small
covers

16 - screws

TOOLS REQUIRED

Phillips head screwdriver

allen wrench (included)

72 - wood
dowels

2 - bottom
side panels

(1 right, 1 left)

2 - side panels

(1 right, 1 left for right

tower assembly)

2 - top
side panels

(1 right, 1 left)

Made in China r10 Page 1 of 3

2 - back panels

Customer Service 800.967.6696 | www.crateandbarrel.com

4 - small
panels

2 - bottom
stretchers

4 - large
panels

PUZZLE ENTERTAINMENT CENTER

RIGHT TOWER ASSEMBLY

right

A

side panel

B

C

top left
side panel

bottom left
side panel

1 A. Place right side panel onto clean, padded surface.
Insert 18 wood dowels and 8 cam screws into left side
panel as shown. Secure, but do not over tighten the
screws with a phillips head screwdriver.

right
side
panel

B. Insert 8 wood dowels and 4 cam screws into
top left side panel as shown.
C. Insert 10 wood dowels and 4 cam screws into
bottom left side panel as shown.

small panels

large panels

A

A

Make sure arrows on
each cam points towards
nearest edge with holes.

B

right
side
panel

3 A. Insert 4 cams into 2 large panels and 2 small panels
as shown. Make sure arrows on each cam points towards

2 Fit holes of bottom stretcher onto dowels of right
side panel. Press firmly to secure.

Made in China r10 Page 2 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

nearest edge with holes.
B. Fit holes of 2 large panels and 2 small panels onto cam
screws and wood dowels of right side panel as shown. With
a phillips head screwdriver, turn each cam clockwise until it
securely engages each cam screw.