Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE BOOKCASE - LEFT FACING
Before beginning assembly,
decide if you want to have
a right or left facing bookcase.
THESE INSTRUCTIONS
ARE FOR ASSEMBLING
A LEFT FACING
BOOKCASE.
Thank you for purchasing the Puzzle Bookcase.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
COMPONENTS
1 - back panel
1 - side panel
2 - shelf end panels 1 - kick plate
1 - base end panel 6 - shelves
Made in China 2004
HARDWARE
24 - cams
32 - cam
covers
2 - plastic
wall anchors
Missing hardware? Please call 800.606.6387 for replacements.
24 - cam
screws
4 - levellers
2 - long
wood screws
12 - wood
screws
2 - short wood
screws
2 - wall
anchor straps
40 - wood
dowels
6 - hole
covers
TOOLS REQUIRED
Allen wrench (included)
Phillips head screwdriver
Bottom
1 Place side panel on the floor with the holes facing up,
oriented as shown. The bottom of the panel has 2 metal
inserts on the edge.
Insert 12 cam screws into the inner holes and secure with
a phillips head screwdriver.
Page 1 of 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE BOOKCASE - LEFT FACING
x 6
A
Arrow points out,
towards edge
with holes
B
2 A. Insert 6 wood dowels into each of the 6 shelves.
B. Insert 4 cams per shelf, making sure the arrow on each
cam points towards the shelf edge.
x 12
Cam in
unlocked
position
Cam in
locked
position
4 Secure 6 shelves to the side panel by turning each
cam 90 degrees clockwise with a screwdriver. Turn the
cam until the arrow is in the position shown in the illustration.
Made in China 2004
Holes on the top
shelf face up
3 Align dowels with holes in side panel and fit shelves
into position. Note: All shelf holes should face down except
for the top shelf.
A
B
5 A. Insert 4 wood dowels into the ends of the
kick plate.
B. Place kick plate into position and fit dowels into
corresponding holes in the side panel.
Page 2 of 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE BOOKCASE - LEFT FACING
Shelf
End Panel
x 2
A
Base End
Panel
B
x 1
6 A. Fasten 4 cam screws to the inner holes of the
2 shelf end panels.
B. Fasten 4 cam screws to the inner holes of the
base end panel.
These holes
will not be used
8 With the assistance of another adult, place the bookcase
assembly face down. Using the included allen wrench,
fasten 12 wood screws through the back panel into the
corresponding holes on the back of the shelves as indicated.
NOTE: There will be 1 unused hole on each shelf.
Made in China 2004
Shelf
End Panel
Shelf
End Panel
Base
End Panel
7 Fit shelf and base end panels into positon, aligning
corresponding holes of cam screws and dowels. Secure
all 12 cams by turning each clockwise 90 degrees.
9 Insert 4 levellers into the threaded holes on the underside of the assembly.
Page 3 of 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE BOOKCASE - LEFT FACING
NOTE:
This bookcase is intended for placement against a wall using
the enclosed anchoring hardware. The included hardware is
for mounting the unit to drywall. Use hardware appropriate to
your wall type.
Short
wood
screw
A
B
C
Cam/
Screw
Covers
Cam/
Screw
Covers
Hole
Covers
10 A. With the assistance of another adult, lift the assembly
into a standing position. Conceal all exposed cams with
cam/screw covers.
B. Conceal all exposed screw heads on back panel with
cam/screw covers.
C. Conceal all holes on shelf edges with hole covers.
Assembly is now complete.
CONFIGURATION SUGGESTIONS
Shown using 1 right facing bookcase, 1 left facing bookcase and 1 set of 2 connector units (sold seperately).
11 A. Drill a hole in the wall slightly
smaller than the diameter of the
plastic wall anchor. Lightly tap with a
hammer until the face is flush with the
wall.
B. Insert long wood screw through
wall anchor strap and into the wall
anchor.
C. Insert short wood screw through
wall anchor strap & into holes on top of
unit.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish.
Made in China 2004
Wall
Wall
anchor
strap
Plastic
wall
anchor
x 2
Long
wood
screw
Page 4 of 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE BOOKCASE - RIGHT FACING
Before beginning assembly,
decide if you want to have
a right or left facing bookcase.
THESE INSTRUCTIONS
ARE FOR ASSEMBLING
A RIGHT FACING
BOOKCASE.
Thank you for purchasing the Puzzle Bookcase.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
COMPONENTS
1 - back panel
1 - side panel
2 - shelf end panels 1 - kick plate
1 - base end panel 6 - shelves
Made in China 2004
HARDWARE
24 - cams
32 - cam
covers
2 - plastic
wall anchors
Missing hardware? Please call 800.606.6387 for replacements.
24 - cam
screws
4 - levellers
2 - long
wood screws
12 - wood
screws
2 - short wood
screws
2 - wall
anchor straps
40 - wood
dowels
6 - hole
covers
TOOLS REQUIRED
Allen wrench (included)
Phillips head screwdriver
Bottom
1 Place side panel on the floor with the holes facing up,
oriented as shown. The bottom of the panel has 2 metal
inserts on the edge.
Insert 12 cam screws into the inner holes and secure with
a phillips head screwdriver.
Page 1 of 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE BOOKCASE - RIGHT FACING
x 6
A
Arrow points out,
towards edge
with holes
B
2 A. Insert 6 wood dowels into each of the 6 shelves.
B. Insert 4 cams per shelf, making sure the arrow on the
cam points towards the shelf edge.
x 12
Cam in
unlocked
position
Cam in
locked
position
4 Secure 6 shelves to the side panel by turning each
cam 90 degrees clockwise with a screwdriver. Turn the
cam until the arrow is in the position shown in the illustration.
Made in China 2004
Holes on the top
shelf face up
3 Align dowels with holes in side panel and fit shelves
into position. Note: All shelf holes should face down except
for the top shelf.
A
B
5 A. Insert 4 wood dowels into the ends of the
kick plate.
B. Place kick plate into position and fit dowels into
corresponding holes in the side panel.
Page 2 of 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE BOOKCASE - RIGHT FACING
Shelf
End Panel
x 2
A
Base End
Panel
B
x 1
6 A. Fasten 4 cam screws to the inner holes of the
2 shelf end panels.
B. Fasten 4 cam screws to the inner holes of the
base end panel.
These holes
will not be used
8 With the assistance of another adult, place the bookcase
assembly face down. Using the included allen wrench,
fasten 12 wood screws through the back panel into the
corresponding holes on the back of the shelves as indicated.
NOTE: There will be 1 unused hole on each shelf.
Made in China 2004
Shelf
End Panel
Shelf
End Panel
Base
End Panel
7 Fit shelf and base end panels into positon, aligning
corresponding holes of cam screws and dowels. Secure
all 12 cams by turning each clockwise 90 degrees.
9 Insert 4 levellers into the threaded holes on the underside of the assembly.
Page 3 of 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE BOOKCASE - RIGHT FACING
NOTE:
This bookcase is intended for placement against a wall using
the enclosed anchoring hardware. The included hardware is
for mounting the unit to drywall. Use hardware appropriate to
your wall type.
Short
wood
screw
A
B
C
Cam
Covers
Cam/
Screw
Covers
Hole
Covers
10 A. With the assistance of another adult, lift the assembly
into a standing position. Conceal all exposed cams with
cam/screw covers.
B. Conceal all exposed screw heads on back panel with
cam/screw covers.
C. Conceal all holes on shelf edges with hole covers.
Assembly is now complete.
CONFIGURATION SUGGESTIONS
Shown using 1 right facing bookcase, 1 left facing bookcase and 1 set of 2 connector units (sold seperately).
11 A. Drill a hole in the wall slightly
smaller than the diameter of the
plastic wall anchor. Lightly tap with a
hammer until the face is flush with the
wall.
B. Insert long wood screw through
wall anchor strap and into the wall
anchor.
C. Insert short wood screw through
wall anchor strap & into holes on top of
unit.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish.
Made in China 2004
Wall
Wall
anchor
strap
Plastic
wall
anchor
x 2
Long
wood
screw
Page 4 of 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE SET OF 2 BOOKCASE CONNECTORS
Thank you for purchasing the Puzzle Set of 2 Bookcase
Connectors. This page lists all the contents included in
the box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
NOTE: These units are designed to be used in conjunction
with the Puzzle Bookcase. Do not use these as stand-alone
storage units.
COMPONENTS
4 - short panels
(2 left, 2 right)
4 - long panels
(2 top, 2 bottom)
2 - back panels
Made in China 2004
HARDWARE
16 - cams
24 - wood dowels
Missing hardware? Please call 800.606.6387 for
replacements.
16 - cam screws
8 - felt pads
TOOLS REQUIRED
Phillips head screwdriver
IMPORTANT NOTE:
You will be building 2 identical units. The following
instructions are for building a single unit, so these
instructions will need to be repeated for assembly
of the 2nd unit.
1 Place 2 short panels on the floor with the holes
facing up. Insert 4 cam screws per panel into the inner
holes and secure with a phillips head screwdriver.
Page 1 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE SET OF 2 BOOKCASE CONNECTORS
x 2
2 A. Insert 4 cams into each long panel, making sure the
arrow on the cam points out towards the edge with the holes.
B. Insert 4 wood dowels into the outer holes of each
long panel.
4 Place other short panel into postion, aligning dowels,
cam screws and back panel with corresponding holes and
slot.
Made in China 2004
Arrow points out,
towards edge
with holes
A
B
A
3 A. Align dowels of the 2 long panels with holes in 1
short panel and fit into position. Make sure the slot of each
panel is at the rear of the assembly.
B. Slide back panel into the slot at the rear of the assembly.
B
x 8
Cam in
unlocked
position
5 Secure the assembly by turning each cam 90 degrees
clockwise with a screwdriver. Turn the cam until the arrow
points away from the edge of the panel.
Cam in
locked
position
Page 2 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE SET OF 2 BOOKCASE CONNECTORS
6 Remove adhesive backer from the 4 felt pads and attach
to the long panels, covering the cam holes.
Assembly is now complete.
CONFIGURATION SUGGESTIONS
Shown using 1 right facing bookcase, 1 left facing
bookcase (sold seperately) and 1 set of 2 connector units.
Made in China 2004
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish.
Page 3 of 3
Loading...