Crate & Barrel Pullman Bench Assembly Instruction
PULLMAN BENCH
HARDWARE
Thank you for purchasing the Pullman Bench. This
page
lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
to this product. As you unpack
COMPONENTS
8 - bolts
Missing hardware?
Please call 800.606.6387 for replacements.
8 - spring
washers
8 - flat
washers
TOOLS REQUIRED
allen wrench (included)
B
1 - seat
frame
(seat cover pre-attached)
A
4 - legs
Made in Vietnam r02 Page 1 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
1 A) Carefully place seat frame face down on
padded surface. Remove velcro seat cover and set
aside.
B) Fit 4 legs into corners of seat frame as shown,
aligning corresponding holes in legs and seat
frame.
PULLMAN BENCH
2 Secure legs with 2 bolts, 2 spring washers, and 2 flat washers per
leg. Fully tighten bolts with an Allen wrench.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
3 Re-attach velcro of seat cover with corresponding
velcro of seat frame. Carefully position unit upright.
Assembly is now complete.
Made in Vietnam r02 Page 2 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...