Crate & Barrel Porto Wall Mirror Assembly Instruction

PORTO WALL MIRROR

Thank you for purchasing the Porto Wall Mirror. This
page lists the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.

Note: 2 people are required to safely install this product.

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

This mirror can be mounted in a vertical or horizontal
orientation. Note the position of keyhole hanging
hardware for each orientation.

Missing hardware?

4 - screws

4 - drywall anchors

Please call 800.606.6387 for replacements.

INSTALLATION INSTRUCTIONS

Note: The wall mounting hardware included with this mirror is intended for drywall installation only. Be sure to use
hardware appropriate for your wall type. Whenever possible, attach mounting hardware into a wall stud.
If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your
local hardware store.

1) Determine where you wish to hang the mirror and mark on the wall where the 2 anchors should be inserted.
Vertically oriented, the distance between the 2 keyhole hanging brackets is 25".
Horizontally oriented, the distance between the 2 keyhole hanging brackets is 35".
Make sure both marks are level.

2) Drill a pilot hole for each anchor slightly smaller than the diameter of the drywall anchor.

3) Insert 1 drywall anchor into each hole until the head of the anchor is flush with the surface of the wall. Gently tap with
a hammer if necessary.

4) Fasten 1 screw with a phillips head screwdriver into each drywall anchor, leaving approximately 1/4" of the screw
projecting from the face of the wall.

5) With the assistance of another person, hang the mirror on the screw heads. Make sure that each screw head snugly
engages the keyhole bracket fitting.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Use glass cleaner to clean the mirror as necessary.

Made in China - r03 Page 1 of 1

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com