Crate & Barrel Pocket Two-Drawer Desk Assembly Instruction
POCKET 2 DRAWER DESK
HARDWARE
Thank you for purchasing the Pocket 2 Drawer Desk.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
4 - small
bolts
Missing hardware?
Please call 800.606.6387 for replacements.
4 - large
bolts
TOOLS REQUIRED
allen wrench (included)
A
8 - spring
washers
8 - flat
washers
B
left drawer
glide
desktop assembly
right drawer
glide
1 - desktop
assembly
drawer
drawer
1 Place desktop assembly onto a clean, padded
2 - leg frames
(1 left, 1 right)
surface. Fully extend each drawer from desktop assemÂbly. Locate plastic tabs on left and right drawer glides.
With even pressure, simutaneously lift the left tab (A)
and press the right tab (B) to release drawer assembly
from assembled unit.
Made in China - r02 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
POCKET 2 DRAWER DESK
2 A) With the assistance of another adult, place desktop
NOTE: Do not over
tighten the bolts
A
right
leg frame
A
assembly upside down onto a clean, padded surface. Fit
right leg frame into desktop assembly. Secure right leg
frame to desktop assembly with 2 flat washers, 2 spring
washers and 2 large bolts as shown, using an allen
wrench. Do not over tighten the bolts.
B) Secure right leg frame to desktop assembly with 2 flat
washers, 2 spring washers and 2 small bolts, using an
allen wrench.
C) Repeat steps A-B for left leg frame.
C
left
leg frame
B
B
drawer
assembly
3 With the assistance of another adult, position unit upright.
Fully extend drawer glides from desktop assembly. Fit
drawer glides of each drawer assembly into corresponding
drawer glides of desktop assembly. Push each drawer
forward and listen for a click to ensure that assembly is
secure.
Assembly is now complete.
desktop
assembly
drawer
assembly
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer. It is recommended
to use coasters to protect surface from heat
and water
Made in China - r02 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...