POCKET TOWER
ASSEMBLY HARDWARE
Thank you for purchasing the Pocket Tower. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
4 - flat
washers
22 - small
screws
4 - spring
washers
8 - large
screws
20 - cams
9 - shelf
screws
4 - bolts2 - hinges
20 - cam
screws
Missing hardware?
Please call
800.606.6387 for
replacements.
WALL MOUNTING HARDWARE
1 - small
screw
1 - large
screw
1 - wall
strap
2 - wall
brackets
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
24 - wood
dowels
1 - plastic
anchor
1 - top panel
1 - bottom
drawer shelf
1 - top
adjustable shelf
1 - top
drawer shelf
2 - fixed
shelves
1 - bottom
adjustable shelf
1 - bottom
2 - side panels
(1 left, 1 right)
1 - back panel
panel
1 - door
1 - drawer
assembly
4 - feet
Made in China - r02 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
POCKET TOWER
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
B
top panel
A
A
bottom panel
NOTE: Do not over
tighten cam screws
left and right
C
side panels
1 A) Insert 4 cams into bottom panel as shown. Make sure
arrows on each cam point toward nearest edge with holes.
B) Insert 4 cams into top panel as shown.
C) Insert 10 cam screws and 12 wood dowels into left and
right side panels a shown. Secure, but do not over tighten,
cam screws using a phillips head screwdriver.
bottom
drawer shelf
top drawer shelf
fixed shelf
top panel
fixed shelf
B
bottom drawer
shelf
2 A) Insert 4 cams into fixed shelf as shown.
B) Insert 4 cams into bottom drawer shelf as shown.
3 Place right side panel onto a clean, padded
surface. Fit dowels of right side panel into
corresponding holes of bottom panel, fixed shelf,
bottom drawer shelf, top drawer shelf, fixed
shelf and top panel as shown. Make sure cams of
all shelves and panels face toward bottom as
shown. Using a phillips head screwdriver, turn
cams clockwise until each cam securely engages
each cam screw.
fixed shelf
bottom panel
right side
panel
Made in China - r02 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
POCKET TOWER
left side
panel
4 Fit dowels of left side panel into corresponding holes of bottom panel, fixed shelf, bottom
drawer shelf, top drawer shelf, fixed shelf and
top panel as shown. Secure all cams.
NOTE: Do not over
tighten the bolts
flat washer
spring washer
bolt
B
B
5 A) Attach back panel to assembled unit with 22
small screws as shown, using a phillips head
screwdriver. Do not over tighten the screws.
B) Fit pre-assembled dowels of 4 feet into
corresponding holes of bottom panel as shown.
Secure each foot with 1 flat washer, 1 spring
washer and 1 bolt, using an allen wrench. Do not
over tighten the bolts.
A
NOTE: Do not over
tighten the screws
A
back panel
Made in China - r02 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
POCKET TOWER
Refer to Hinge Adjustment
diagram for adjusting the
alignment of the
door hinges.
hinge
door
6 Attach 2 hinges to door with 2 large screws per
hinge as shown, using a phillips head screwdriver.
top
adjustable
B
shelf
D
drawer
C
assembly
bottom
adjustable
B
shelf
7 With the assistance of another adult, position unit
upright. Attach hinges of door to left side panel as
shown. Secure each hinge with 2 large screws, using a
screwdriver.
8 A) Insert 8 shelf pins at desired shelf heights. Turn
each shelf pin clockwise to secure.
B) Place top and bottom adjustable shelves into
assembly as shown. Make sure that each shelf is
securely supported by each shelf pin.
C) Fit drawer assembly into assembled unit as shown.
D) Insert 1 shelf pin into underside of top drawer shelf
a shown.
Assembly is now complete.
A
D
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
Made in China - r02 Page 4 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
POCKET TOWER
HINGE ADJUSTMENT
If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated.
A
1
2
A
B
Side to side adjustment:
Loosen screw A, adjust gap with
screw B and re-tighten screw A
Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise
SAFETY MOUNTING INSTRUCTIONS:
For added safety and stability, it is
recommended that the wall mounting hardware
be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall
type (i.e. plaster, drywall, concrete, etc.).
Mount to wood studs whenever possible.
WALL
B
C
3
C
Height adjustment:
Loosen screw C, adjust door
height and re-tighten screw C
wall
bracket
plastic
C
anchor
large
D
screw
F
wall
strap
wall
bracket
A) Attach 1 wall bracket to back of unit using
1 small screw as shown.
B) Determine the final location of unit. Mark
position on the wall, approximately 2" below
each wall bracket mounted to the back of the
unit.
C) Drill a hole in the wall stud. If the wall stud
is not available, drill a hole in the wall that is
slightly smaller in diameter than the anchor.
Gently tap the plastic anchor until the flange of
the anchor is flush with the wall.
D) Attach 1 wall bracket to the wall by
inserting 1 large screw through the bracket
and each plastic anchor in the wall.
E) Place the unit so the wall bracket on the
back edge are aligned with the wall bracket on
the wall.
F) Lace one end of the wall straps through
each bracket, and into the other end of the
strap.
G) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
Made in China - r02 Page 5 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
NOTE:
If you are unsure about your
wall type or what mounting
method you should use,
consult a qualified professional
or your local hardware store.
A
small
screw
Loading...