PIVOT BUFFET
HARDWARE
Thank you for purchasing the Pivot Buffet. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
4 - adjustable
1 - top
panel
shelves
8 - cams 8 - cam
screws
44 - spring
washers
Missing hardware?
Please call 800.606.6387 for replacements.
8 - screws
44 - bolts 44 - flat
16 - shelf
pins
TOOLS REQUIRED
phillips head screwdriver
washers
2 - side panels
1 - bottom
panel
1 - front
frame
1 - drawer
bottom
Made in Vietnam - r05 Page 1 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
1 - back
panel
2 - fixed
shelves
2 - drawer
sides
(1 left, 1 right)
2 - wine rack
panels
1 - drawer
back
2 - middle
partitions
(1 left, 1 right)
1 - drawer
front
4 - feet
PIVOT BUFFET
A
fixed
shelf
NOTE: Make sure
arrows on each cam
point towards nearest
edge with holes
B
partition
1 A) Insert 4 cams into 2 fixed shelves as shown. Make
sure arrows on each cam point towards nearest edge with
holes.
B) Insert 4 cam screws into 2 middle partitions. Secure cam
screws with a phillips head screwdriver.
NOTE: Make sure “BOTTOM” labeled
on each fixed shelf is facing towards
left
partition
NOTE: Make sure arrows labeled
“UP” on left/right partition are
pointing towards the top of assembly
the bottom
fixed
shelf
BOTTOM
BOTTOM
right
partition
2 Fit pre-assembled dowels of fixed shelves into
corresponding holes of left/right partitions as shown.
With a screwdriver, turn each cam clockwise until it
securely engages each cam screw.
NOTE: Make sure arrow
labeled “UP” on back panel
is pointing towards the top
of assembly
back
frame
3 Fit dowels of assembled unit into corresponding
holes of back panel as shown.
NOTE: Make sure arrow labels
left side
panel
on left/right sides points towards
the top of assembly
right side
panel
4 Attach back frame of assembled unit to left/right side
panels with 6 bolts, 6 spring washers, and 6 flat washers.
Secure bolts with a phillips head screwdriver.
Made in Vietnam - r05 Page 2 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
PIVOT BUFFET
front
frame
front
frame
frame
support
5 Remove frame support from front frame as shown.
With a screwdriver, turn pre-attached screws
counter-clockwise to detach and discard.
bottom
foot
panel
7 Attach 4 feet to bottom panel with 1 bolt, 1 spring
washer, and 1 flat washer per foot as shown.
6 With the assistance of another adult, attach front
frame to assembled unit with 6 bolt, 6 spring washers,
and 6 flat washers as shown.
bottom
assembly
NOTE: Make sure arrow
labeled “FRONT” on underside of
bottom assembly is pointing
towards the front
8 With the assistance of another adult, attach assembled
unit to bottom panel assembly with 13 bolts, 13 spring
washers, and 13 flat washers as shown.
Made in Vietnam - r05 Page 3 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
PIVOT BUFFET
top
panel
drawer
back
left drawer
side
right drawer
side
9 Attach top panel to assembled unit with 15 bolts,
15 spring washers, and 15 flat washers as shown.
drawer
bottom
10 Attach left and right drawer sides to drawer
back with 4 screws as shown. Secure screws with a
screwdriver.
drawer
front
11 Slide drawer bottom into grooves of drawer
assmebly as shown.
Made in Vietnam - r05 Page 4 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
12 Fit drawer front to drawer assembly and secure
with 4 screws as shown.
PIVOT BUFFET
wine rack
panel
wine rack
panel
14 Fit drawer glides of drawer assembly into
corresponding drawer glides of assembled unit as
shown.
16 A) Insert 16 shelf pins at desired shelf heights as shown.
B) Insert 4 adjustable shelves into assembled unit. Make
sure each shelf is securely supported by shelf pins.
C) Insert wine rack assembly into assembled unit as shown.
Assembly is now complete.
A
15 Fit slot of wine rack panel into corresponding
slot of remaining wine rack panel as shown.
B
A
C
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Made in Vietnam - r05 Page 5 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...