Crate & Barrel Pilsen 52 Media Console Assembly Instruction
PILSEN MEDIA CONSOLE
Thank you for purchasing the Pilsen Media Console.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
HARDWARE
24 - bolts
Missing hardware? Please call
800.606.6387 for replacements.
18 - bumpers
TOOLS REQUIRED
allen wrench (included)
COMPONENTS
1 - top
glasss shelf
1 - middle
glass shelf
1 - bottom
glass shelf
2 - top
crossbars
2 - bottom
crossbars
6 - support pins
2 - side frames
(1 left, 1 right)
2 - middle
crossbars
ASSEMBLY
NOTE: Make sure feet of side
frames and bottom crossbar
face up as shown during
assembly
left side
frame
C
bottom
crossbar
B
middle
crossbar
A
top
crossbar
NOTE: Make sure holes
of bottom crossbars
face inward as shown
bottom
crossbar
1 A) Fit 2 top crossbars over bracket of left side
frame with 2 bolts per crossbar as shown. Secure, but
do not over tighten, bolts using an allen wrench.
B) Fit 2 middle crossbars over bracket of left side
frame and secure with 2 bolts per crossbar as shown.
C) Fit 2 bottom crossbar over bracket of left side
frame and secure with 2 bolts per crossbar as shown.
Repeat steps A-C for right side frame.
middle
crossbar
A
top
crossbar
right side
frame
Made in China - r03 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
B
C
PILSEN MEDIA CONSOLE
C
glass shelf
middle
C
glass shelf
bottom
D
glass shelf
top
B
support
pins
A
bumper
2 A) With the assistance of another adult, position
media assembly upright. Adhere 18 bumpers to
assembly as shown.
B) Fit 6 support pins into corresponding holes of
media assembly as shown.
C) With the assistance of another adult, carefully
place top and middle glass shelves onto media
assembly as shown. Make sure glass shelves are
securely supported by bumpers.
D) With the assistance of another adult, carefully
place bottom glass shelf onto media assembly as
shown. Make sure glass shelf is securely supported
by pins.
Assembly is now complete.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer.
Glass: Wipe clean with class cleaner and lint free cloth.
Made in China - r03 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...