PERFORATED 5-SHELF UNIT
Thank you for purchasing the Perforated 5-Shelf Unit.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
HARDWARE
4 - feet
20 - plug
brackets
Missing hardware?
Please call 800.606.6387 for replacements.
P
O
T
20 - socket
brackets
4 - threaded
connectors
WALL MOUNTING ASSEMBLY
2 - wall
brackets
2 - wall
straps
anchors
COMPONENTS
5 - shelves
4 - bottom
uprights
B
2 - screws2 - plastic
plug
bracket
4 - top
uprights
socket
bracket
P
O
T
plug
bracket
socket
bracket
P
O
T
A
bottom
upright
B
groove
B
foot
C
shelf
A
1 A) Fit 1 plug bracket and 1 socket bracket onto
groove of each upright as shown. Make sure brackets
snap-fit securely together.
B) Slide 4 bottom uprights through corresponding holes
of 1 shelf. Fit shelf over brackets and press down firmly to
secure.
C) Attach 4 feet to assembled unit by turning each foot
counterclockwise as shown.
top
upright
C
A
groove
B
shelf
B
A
2 A) Fit assembled uprights into corresponding holes of 1
shelf. Fit 1 plug bracket and 1 socket bracket onto groove
of each upright at desired shelf height. Make sure brackets
snap-fit securely together.
B) Slide 4 bottom uprights through corresponding holes of 1
shelf. Fit shelf over brackets and press down firmly to secure.
C) Attach 4 top upright to assembled bottom uprights with
1 threaded connector as shown. Secure by turning top
uprights clockwise.
Made in Taiwan - r05 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
PERFORATED 5-SHELF UNIT
3 A) Fit 1 plug bracket and 1 socket bracket onto groove of each
upright at desired shelf height. Make sure brackets snap-fit securely
together.
B) Slide 4 top uprights through corresponding holes of 1 shelf. Fit
shelf over brackets and press down firmly to secure. Repeat for
remaining shelves.
Assembly is now complete.
A
plug
bracket
A
groove
CLEANING AND CARE
socket
bracket
T
P
O
Clean surfaces with a dry soft cloth. Do not use abrasive cleaners.
Made in Taiwan - r05
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 2 of 3
PERFORATED 5-SHELF UNIT
SAFETY WALL MOUNTING INSTRUCTIONS:
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential to
use wall anchors appropriate to your wall type (i.e. plaster, dry wall,
concrete, etc.). Mount to wood studs whenever possible.
A) Determine final location of final unit. Mark position on wall.
B) Drill a hole in the wall stud. If the wall stud is not available, drill a
hole in the wall that is slightly smaller in diameter than the anchor.
Gently tap the plastic anchor until the flange of the anchor is flush
with the wall.
C) Attach wall brackets to the wall by inserting 1 screw through
each bracket and into each plastic anchor in the wall, secure with a
screwdriver.
D) Lace one end of the wall straps through each bracket and around
back upright of assembled unit, and into the other end of the strap.
E) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
NOTE:
If you are unsure about your wall type
or what mounting method you should
use, consult a qualified professional
or your local hardware store.
C
wall
bracket
wall
D
strap
screw
Made in Taiwan - r05 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
B
plastic
anchor
WALL
Loading...