Crate & Barrel Pathway King Bed, Pathway Queen Bed Assembly Instruction
PATHWAY QUEEN AND KING BED
HARDWARE
Thank you for purchasing the Pathway Queen and King
Bed. This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
4 - large
screws
14 - center slat
fittings
Missing hardware? Please call 800.606.6387 for
replacements.
8 - medium
screws
12 - spring
washers
4 - small
screws
12 - flat
washers
28 - side slat
fittings
4 - rubber
washers
TOOLS REQUIRED
Allen wrench (included)
1 - headboard
2 - side rails
(1 right, 1 left)
2 - support
leg
Made in China r06 Page 1 of 2
1 - foot rail
1 - center
rail
1 With the assistance of another adult, align holes in
side rail with corresponding holes in headboard.
Attach with 2 large screws, 2 spring washers, 2 flat
28 - slats
Customer Service 800.967.6696 | www.crateandbarrel.com
washers, and 2 rubber washers as shown. Fully
tighten using allen wrench. Repeat for the other side
rail.
PATHWAY QUEEN AND KING BED
2 Align holes in side rails with corresponding holes in
foot rail. Attach with 2 medium screws, 2 spring
washers and 2 flat washers per side rail. Fully
tighten with allen wrench.
A
A
B
B
B
3 A. Attach 2 support legs to underside of center
rail as shown with 2 medium screws, 2 spring
washers, and 2 flat washers per leg.
B. Place center rail into position and attach at the
headboard and foot rail with 2 small screws.
A
NOTE: Make sure the
slats bow upwards.
B
4 A) Fit 1 side slat fitting on one end of each slat.
B) Align pegs on underside of side slat fittings with
corresponding holes on side rails and fit each slat
into position. Make sure the slats bow upwards.
5 Insert each open slat end into either side of the center slat
fitting. Fit pins of each center fitting to corresponding holes
in the center rail. Repeat until all slats are securely engaged
in each fitting. Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
Made in China r06 Page 2 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...