Page 1
PATERSON TWO DOOR CUPBOARD
ASSEMBLY HARDWARE
Thank you for purchasing the Paterson Two Door
Cupboard. This page lists all the contents included in
the box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
4 - barrel
nuts
8 - shelf
pins
24 - hinge
screws
dowels
4 - small
bolts
6 - hinges8 - wood
4 - pull
bolts
4 - large
bolts
WALL MOUNTING HARDWARE
2 - wall
straps
Missing hardware? Please call 800.606.6387 for replacements.
2 - wall
brackets
2 - anti-tip
brackets
2 - plastic
anchors
2 - large
screws
4 - small
screws
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
1 - top panel 2 - side panels
1 - base 2 - adjustable shelves 1 - back panel 2 - pulls
Made in China - r04 Page 1 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
(1 left, 1 right)
2 - door frames
(1 left, 1 right)
Page 2
PATERSON TWO DOOR CUPBOARD
NOTE: Do not over
tighten the bolts
A
right side panel
left side panel
B
back panel
top panel
NOTE: Make sure grooves
are on the same side during
assembly
1 A) Insert 4 wood dowels into left and right side
panels as shown.
B) Fit dowels of left and right side panels into corresponding holes of top panel, and attach with 4 small
bolts as shown. Secure, but do not over tighten, bolts
with a phillips head screwdriver.
base
A
B
2 Insert back panel into grooves of side panels as
shown.
B
NOTE: Make sure hole of
barrel nut aligns with holes
in nearest edge
left and right
door fronts
3 A) Insert 2 barrel nuts into left and right side panels
as shown. Make sure hole of barrel nut aligns with hole in
nearest edge.
B) Fit dowels of assembly into corresponding holes of base
4 Attach 3 hinges to left and right door fronts with 2
hinge screws per hinge. Secure, but do not over
tighten, screws with a screwdriver.
as shown. Secure base with 4 large bolts, using a screwdriver. Make sure bolts securely engage in barrel nuts.
Made in China - r04 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 3
PATERSON TWO DOOR CUPBOARD
Refer to Hinge Adjustment
diagram for adjusting the
alignment of the door hinges
B
right door frame
left door frame
5 With assistance of another adult, position unit
upright as shown. Attach left and right door frames
to side panels with 2 hinge screws per hinge.
B
A
A
6 A) Attach 1 pull to left and right door frames with 2
pull bolts per pull as shown, using a screwdriver.
B) Insert 12 shelf pins at desired shelf heights. Press pins
firmly to secure.
adjustable
shelf
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
7 Place 2 adjustable shelves onto shelf pins as
shown. Make sure shelves are securely supported by
shelf pins.
Assembly is now complete.
Made in China - r04 Page 3 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 4
PATERSON TWO DOOR CUPBOARD
HINGE ADJUSTMENT
1) Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten
screw A.
A
B
1
If the doors do not appear square or aligned,
loosen or tighten the appropriate screws on
each case hinge as illustrated.
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A.
A
2
3) Height adjustment:
Loosen screw C, adjust
door height and retighten screw C.
C
C
3
OPTIONAL WALL MOUNTING INSTRUCTIONS
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
For added safety and stability, it is recommended that the wall mounting
hardware be installed. For safe mounting, it is essential to use wall
anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.).
Mount to wood studs whenever possible.
A) Attach anti-tip bracket to top of unit using 2 small screws as shown.
B) Determine the final location of unit. Mark position on the wall,
approximately 2" below the anti-tip bracket mounted to the back of the
unit.
C) Drill a pilot hole in the wall stud. If the wall stud is not available, drill a
hole in the wall that is slightly smaller in diameter than the anchor. Gently
tap the plastic anchor until the flange of the anchor is flush with the wall.
D) Attach wall bracket to the wall by inserting 1 large screw, and into
the plastic anchor in the wall.
E) Place the unit so the anti-tip bracket on the back edge is aligned with
the wall bracket on the wall.
F) Lace one end of the wall strap through both brackets, and into the
other end of the strap.
G) Pull the strap tightly until secure.
bracket
D
C
wall
large
screw
small
screw
A
WALL
plastic
anchor
F
wall
strap
anti-tip
bracket
Wall mounting assembly is now complete.
Made in China - r04 Page 4 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...