Crate & Barrel Paterson Storage Bench Assembly Instruction

PATERSON BENCH

HARDWARE

Thank you for purchasing the Paterson Bench. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

dowels

8 - barrel
nuts

8 - cam
screws

Missing hardware?
Please call 800.606.6387 for replacements.

8 - cams22 - wood

8 - large
bolts

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

2 - side panels

(1 left, 1 right)

1 - back panel 1 - cushion

Made in China - r04 Page 1 of 4

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - partition 1 - top panel

1 - base

(sold separately)

PATERSON BENCH

NOTE: Make sure arrow on
each cam points toward nearest
edge with holes

partition

A

B

top panel

NOTE: Do not over
tighten the cam screws

1 A) Insert 2 cams and 4 wood dowels into partition as shown. Make sure arrow on each cam
points toward nearest edge with holes.
B) Insert 8 cam screws into top panel as shown. Secure, but do not over tighten, with a phillips
head screwdriver.

NOTE: Make sure cams in
partition are secured to
cam screws in top panel

top panel

partition

2 Fit dowels of partition into corresponding holes of top
panel as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.

left side panel

right side panel

3 Insert 2 cams and 4 wood dowels in left and right
side panels as shown.

Made in China - r04 Page 2 of 4

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com